Aibner C75M20Y8K0 Wireless Chargers Instructions
- June 6, 2024
- Aibner
Table of Contents
Wireless without bondage, enjoy the freedom
C 75 M 20 Y 8 K 0
| LED Indicator | Status |
|---|---|
| Greenlight for 5S, blue light for 10 seconds, then go out | Connected to power |
| Blue keeps on for 15 seconds, then goes out | Charging mobile device |
| Blue and green lights flashing | Metal or abnormal objects detected |
| Flashing green | Overvoltage protection means you need to switch to 5V/9VDC |
adapter
-
You can not charge your device wirelessly in these scenarios：
o using a case with a magnetic/iron plate；
o using a case with a pop socket；
o using an ultra-thick(>6mm) protective phone case. -
Do not place any foreign objects between your device and the wireless charger’s surface, including metal pads on a car mount,credit cards, door keys, coins, metal, or NFC cards, which will make wireless charging fail or cause overheating.
-
Wireless chargers make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers.
-
High temperatures will reduce charging speed and restrict power， which is a phenomenon common to all wireless chargers. It is recommended that you charge your device in environments with temperatures below 25°C/77°F
-
Both the protective phone case and the position of your device on the wireless charger will affect the charging speed. The farther it is placed from the center of the wireless charger, the slower the charging speed will be.
Important Safety Instructions
- Avoid dropping.
- Do not disassemble.
- Do not expose to liquids.
- For the safest and fastest charge， use original or certified cables.
- This product is suitable for moderate li mates only.
- The maximum ambient temperature during use of this product must not exceed 40°C.
- Open fame sources, such as candles, must not be placed on this product.
- Only use a dry cloth or brush to clean this product.
FCC Statement
This device complies with Part 15oftheFCC Rules. Operation is subject to the following two conditions;
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Warning:
Changes or Modi actions not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15oftheFCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential in stag action. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radiocommunications. However,
there is no guarantee that interference wil not occur in a particular
installation.If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures,
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator&your body.
Product Name : Wireless Charger
Model: A 18
Shenzhen Aibner Electronics Co., Ltd
3rd floor, building 1, Nanyue United Industrial Zone, Longgang District,
Shenzhen City, Guangdong Province, China
Telephone:(86) 400-805-8882
IC Statement
This device com Les with RSS 216 of Industry Canada, Operat in is sub ect to the condition that this device does not cause harmful interference.
Specifications
| Input | 5V=2A/9V=2A |
|---|---|
| Output | 10WMax |
| Size | 100x100x5mm/3.9×3.9×0.2in |
| Weight | 67g/2.4oz |
Declaration of Conformity
Hereby, Shenzhen Aibner Electronics Co., Ltd declares that the product type A18isin compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address. https://chaoliugongshi.tmall.com/
Customer Service
12-month limited warranty
Lifetime technical support
2226956440@qq.com
(86)4008058882
For FAQs and more information, please visit.
https://chaoliugongshi.tmall.com/