Bear HMJ-A50N1 Kitchen Machinery User Guide

Kitchen Machinery (Dough mixer)
Applicable model: HMJ-A50N1http://weixin.qq.com/r/enUcBCPEtn7JrWdn9yBo

WARNING: Please read this instruction manual carefully before using the product! This product is for home or similar places only.
Execution standard: GB 4706.1-2005 GB 4706.30-2008 GB 4806.1-2016 Note: When the product picture is slightly different from the real thing, please refer to the real thing.

PRODUC DESCRIPTION

Note

• Do not use a power source other than 220V-, otherwise there is a risk of electric shock or fire.| • Use a socket of 6A or above only. If the outlet is shared with other electrical appliances, the wiring of the outlet/ may cause abnormal heat and fire

---|---
• Hold the power cord plug with your hand and insert the power cord plug smoothly into the power outlet.| • Hold the power cord plug with your hand and pull it out smoothly from the power cord outlet.

• Do not pull out the power cord by hand.| • Do not scratch the machine with hard objects such as iron.
• After using the machine, the power cord must be unplugged, otherwise there is a risk of electric shock, leakage and fire.
• After the first mixing, let the machine cool down for 30 minutes before the second continuous mixing, otherwise the life of the machine will be shortened due to overheating. When the motor is overheated, the machine will stop working automatically and will start working again after it cools down. So when the machine stops working due to overheating, please press the “Start/Pause” button and unplug the power cord.
• Do not use the mixing bowl as a liquid container.
•Do not press the button too hard to prevent damage to the button.
WARNING
| •Do not disassemble, repair, or modify the machine except by a professional repair technician. Failure to do so may result in fire, electrical leakage,
or ahnnrmal operation
| •Do not allow children or people without conscious behavior to touch the machine.
• After plugging in the power cord, do not let your fingers, hair, clothes, etc. touch the rotating parts.
• Before starting the machine, make sure the dough pail is installed on the machine and do not remove the dough pail from the machine while it is in use.

Usage method

Before use, clean the dough bucket, mixing knife, cup lid, and small lid.
Place the machine on a smooth tabletop.
Note:
The machine is equipped with suction cup feet, which must be placed on a flat surface, otherwise they cannot be adsorbed and will affect the safety of using the machine.
Load the mixing knife, align the mixing knife with the direction of the D-shaped hole and install it in place.
Put the flour, water and other ingredients into the mixing drum.

Note:
This machine can mix dry flour weight: 400 to 1600g.
Recommended ratio of flour to water: 100:50 to 100:60.
Refer to the following table or recipe.
Ratio of flour to yeast: 100:1.
For best results, spread the dough evenly on the bottom after mixing.
After the first mixing session, if you don’t need to let the dough rise, let the machine cool down for 30 minutes before starting the second continuous mixing session, otherwise the life of the machine will be shortened due to overheating.

The following data is for reference only (the ratio of flour and water is 2:1 to 2:1.2)

Flour(g)| Water(g)| Time
400| 200-240| 15
600| 300-360| 15
1000| 500-600| 15
1600| 800-960| 15

Accessories Specification

Align the lid buckle with the buckle on the dough bucket to assemble the lid downward, then tighten the lid clockwise.
Note:
In the work, you can directly open the small lid and add a small amount of seasoning to the dough bucket

Assemble the dough bucket to the main machine.
When the product is powered on, it automatically enters the standby mode, the digital tube is displayed as “OFF”, the light is on without indicator, and all functions do not work.

Operation Mode

Press the “Start/Pause”” button directly after power on.
The product will start to work according to the default setting programme: The default setting is only “Chinese-style Knead Dough” function, which lasts for 15 minutes. If you press the “Chinese-style Knead Dough” key, the blue light of “Chinese-style Knead  Dough’ will shine. You can adjust the time of “Chinese-style Knead Dough” by “+” and “-“, but “Chinese-style Knead Dough” cumulative time must not exceed 25 minutes, at least 1 minute. After the time is adjusted, it will return to the working state of “”Chinese- style Knead Dough” in 3 seconds.
The digital tube displays the remaining working time, and the red light of “Chinese-style Knead Dough” is always on until the work is finished.
At this time, press the “Wake up Dough” key to increase the “Wake up Dough” function, at this time, the “wake face” blue light is shining, the “Chinese- style Knead Dough” blue light is steady on, you can adjust the “Wake up Dough” working time by “+”and”-“,  but the “Wake up Dough” time shall not exceed 120 minutes, at least not less than 1 minute, at this time “Chinese-style Knead Dough” red light is always on, “Wake up Dough” blue light is always on. This process nixie displays the remaining time for the  corresponding work. When the
*Chinese-style Knead Dough” ends the “Wake up Dough” work, the “Chinese-style Knead Dough’ indicator light is off, and the “Wake up Dough’ red light is on.
At this time, press “Start/Pause” to stop the work, the digital tube displays the current time unchanged, and the “Chinese-style Knead Dough” work indicator light flashes red. Press “Start/Pause” again to continue the previously unfinished work. All work is  completed: the buzzer sounds three times, stops for 1 second, and returns to standby mode after three cycles.

• Select the “Chinese-style Knead Dough” function, set the time and press the “Start/Pause” button.
  After setting the “Chinese-style Knead Dough” time, press the “Start/Pause” button, and the product will start working according to the custom set time (for example: custom kneading noodles for 20 minutes), if the “Wake up Dough” is not set before or during  the work, the work is completed and the work is finished. The buzzer beeps three times, stops for 1 second, and returns to standby mode after three cycles.
  If you press “Wake Up Dough” during the kneading process, you can add the “Wake Up Dough” function. The “Wake Up Dough” blue light will flash, and the “Knead Dough” blue light will stay on. After setting for 3 seconds, it will return to “Chinese Style Knead  Dough”. The interface of “Kneading Noodles” work. The red light of “Kneading Noodles” is always on, and the blue light of “Wake Up Dough” is always on.

At this time, press the “Chinese-style Knead Dough” or “waking-up” button to adjust the working time of “Chinese-style kneading” or “Wake up Dough” through “+” and *-“. The cumulative time of “Chinese-style Knead Dough” shall not exceed 25 minutes, at  least no less than 1 minute.
“Wake up Dough” shall not exceed 120 minutes, and shall not be less than 1 minute.
At this time, press “Start/Pause” to stop the work, the digital tube displays the current time unchanged, and the “Chinese-style Knead Dough” work indicator light flashes red. Press “Start/Pause” again to continue the previously unfinished work. Long press the  “Start/Pause” button to stop working and return to standby state.
Select the “wake up” function and press the “Start/Pause”” button after setting the time
After setting the “Wake up Dough” time, press the “Start/Pause” button. The product will start working according to the customized time (for example: wake-up time is set to 120 minutes).
The work is completed: the buzzer will sound 3 times, pause for 1 second, and cycle three times. to standby state.
During this process, the digital tube displays the remaining time corresponding to the waking up work, and the “Wake up Dough’ red light is always on.
At this time, pressing the “Knead Dough” key is invalid. Press the “Wake up Dough” key to adjust the working time of “Wake Up Dough” through “+” and ”-“. The “Wake up Dough” should not exceed 120 minutes, and should not be less than 1 minute.
At this time, press “Start/Pause” to stop the work, the digital tube will display the current time unchanged, and the “wake up” indicator light will flash red. Press “Start/Pause” again to continue the unfinished work. Long press the “Start/Pause” button to stop  working and return to standby state.
Select the “Chinese blend, wake up” function, set the time and press the “Start/Pause” button After setting the “Chinese-style Knead Dough and Wake up Dough’ time, press the “Start/Pause” button. The product will start working according to the set time (for  example: 20 minutes of kneading – 100 minutes of waking). When the work is completed: the buzzer will sound three times.
The sound stops for 1 second and returns to standby mode after three cycles.
During this process, the digital tube displays the remaining time of the corresponding work. When kneading nocdles, the red light of “Chinese style kneading’ is always on, and the blue light of “Wake up Dough” is always on. When the noodle mixing is finished  and the noodle awakening work is completed, the “Chinese-style Knead Dough” indicator light goes out and the “waking noodle” red light is always on.

Basic Parameter Table

Recipe Guide

* Steamed Bun
Ingredients:
High-gluten flour—————————–1000g
Yeast powder———————————-10g
Water——————————————-450mL-500mL
Craftsmanship:

* How to make toast (bread)

Ingredients:
High gluten flour—————————————600g
Yeast powder——————————————-10g
Salt——————-—————————————–6g
Milk———————————————————-280-320mL
Honey——————————————————120g
Butter——————————————————-30g
EQQS———————————————————2
Cooking oil———————————————-appropriate amount

Craftsmanship:

FAQ Analysis

* Light does not shine:

• Is there a power outage?
• Is the power cord plugged into the outlet?
• Is the power outlet turned off?

* The dough knife stops rotating during the mixing process:

• Has the set dough time arrived?
• The motor is overheated and needs to wait until the motor cools down to room temperature.

It is normal for the host to have an odor when you first use this product, and it will dissipate naturally after repeated use.
Note: If the fault cannot be eliminated after analyzing the above phenomena, please contact our company’s maintenance point or dealer. Non- professionals are strictly prohibited from disassembling and assembling the machine by themselves.

Cleaning and Maintenance

Before cleaning, the power cord must be unplugged, otherwise short circuit or electric shock may occur.

| Please wipe the machine body with a dry cloth. It is strictly prohibited to rinse the body with water or place it in water.
| The noodle bucket, cup lid, small lid, mixing knife, measuring cup, and measuring spoon can be washed in water, and please dry them naturally or wipe them with a dry cloth.
| Metal brushes, nylon brushes, detergent powder, thinner, and other cleaning supplies will damage the surface
structure of the product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>