Coyres C2-RGB Wired Mechanical Gaming Keyboard Instruction Manual
- June 6, 2024
- Coyres
Table of Contents
Coyres C2-RGB Wired Mechanical Gaming Keyboard
Mechanical keyboard
Content list:
- Mechanical keyboard×1
- USB Type-C cable×1
- USB Type-C female port to USB
- type-A male adapter×1
- Package box×1
- Instruction manual×1
79-Keys keyboard specifications:
- Case material: aluminum alloy
- Keycap material: ABS
- Backlight: RGB/White (Dependent on models)
- Battery: 2000mAh Lithium-ion rechargeable battery
- Working time: 2-4 weeks (dependent on usage) / 8-40 hours backlighting (varies with brightness and usage)
- Charging time: 2-3 hours
- Charging port:USB Type-C
- Mode: Bluetooth/Wired
- Bluetooth device name: Coyres-1/2/3
- Size:11.4x 4.4x 0.26″ (289.7×112.7×6.7mm)
- Weight:Approximately 1 lbs 0.8 oz (490 g)
- Ambient temperature: 14~122 °F (-10 to 50℃)
Keyboard Overview:
- Indicator light
- USB-C port
- ON/OFF button
Function Description
USB connection:
Connect the USB cable into the USB port② to other USB port for charging;
Connect the keyboard to computer with the USB cable for wired use;
Use the USB-A to USB-C adaptor as needed.
Charging Indicator:
Red light blinks as the batterly is below 15%;
Red light is on at charging;
Greenlight is on when charging completes;
For the best charging time, use a 5V/500mA transformer and USB2.0 or 3.0.
This product supports up to 5V charging voltage and 500mA charging current.
CAUTION
Charging at Voltage > DC 5V or Current > 500 mA DC may damage the
keyboard!Manufacturer is not responsible for defects caused by improper
charging.
Key layout: 79-key RGB (white) backlit USB Bluetooth dual-mode mechanical keyboard
- A:
Backlight switch key, the backlight turns on every time the power is switched on. - B. Under the iOS system, press to delete backwards and press
to delete forwards. - C. tap to input “/”,
to input“?” , hold the “Shift” for SHIFT function.
Note: It is modifed iOS keyboard, and keys F1~F12 is for iOS multimedia functions.
FN key combination function
switch wired mode and bluetooth mode
- Wired mode: keyboard automatically detects the connection at power on, the indicator light turns green in USB wired mode.
- Bluetooth mode: Switching the power on will activate the bluetooth mode. Press + keyboard with other device, the device must have bluetooth turn on, the blue light of pairing, lights up after pairing done, the keyboard will be identified as Coyres-1 after successful pairing.
- Press
to pair the keyboard with other bluetooth devices as needed. The keyboard will be identified as Coyres-2 and Coyres-3 respectively by its paired devices. - Once the keyboard has been paired with the device before, the reconnection time is less than 30 seconds, although the initial pairing time may be up to 90 seconds.
- After the connection is established, if there is no keyboard action for 2 minutes, all lights will be automatically turned off to enter power saving mode, after another 10 minutes without keystroke, it will enter to deep sleep mode.
Technical specs:
Full power operation 250mA working current. (backlight fully on)
Power saving mode 20mA working current. (backlight off )
Sleep mode 0.1 mA working current. (Deep sleeping) low power shutdown:In
wireless mode, when it is detected that the battery is lower than or equal to
3.0V, it will enter the shutdown status, and when it is plugged in for wired
charging, it can resume normal use.
when the battery is greater than or equal to 3.3V, it can be used normally.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation, This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television Recep on, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separa on between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifica ons not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the followingtwo conditions: This device may not cause harmful interference,
and This device must accept any interference received, including interference
that may causeundesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Disclaimer:
To the best of our knowledge, the information contained herein is accurate, we
do not assume any liability whatsoever for the accuracy or completeness of the
information contained herein, we reserve the right to modify the product
without prior notice.
C2 Mechanical Keyboard
Aluminum Case, Low Profile, Bluetooth
www.coyres.com
[email protected]