SAGE LU MEI R1 10-Key RF Remote Controller User Manual

SAGE LU MEI R1 10-Key RF Remote Controller

1,4,8 zone dimming/10-key/Wireless remote 30m distance/CR2032 battery/Magnet stuck fix

Features

• Apply to single color or dual color LED controller.
• Each remote can match one or more receivers.
• CR2032 battery powered.
• Operate with LED indicator light.
• Magnet on the back which can be easily stuck on back holder or any metal surfaces.

Technical Parameters

Mechanical Structures and Installations

To fix the remote, three options are offered for selection:

• Option 1: stuck the remote on any metal surfaces directly.
• Option 2: fix the remote’ back holder on the wall with two screws.
• Option 3: adhere the remote’ back holder to the wall with a paster.

Match Remote Control

The end user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key

• Match:
  Short press the match key, and immediately press on/off key (single zone remote) or zone key (multiple zones remote) on the remote. The LED indicator fast flash a few times means the match is successful.

• Delete:
  Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted.

Use Power Restart

• Match:
  Switch off the power, then switch on the power, and repeat again. An immediately short press on/off key (single zone remote) or zone key (multiple zones remote) 3 times on the remote. The light blinks 3 times means the match is successful.

• Delete:
  Switch off the power, then switch on the power, and repeat again. An immediately short press on/off key (single zone remote) or zone key (multiple zones remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.

Key function

R1 1 zone dimming remote

• Brightness+/-:
  

  • Short press 10 levels,
  • long press 1-6s for continuous 256 levels adjustment.

• Scene 1/2:
  

  • Brightness memory.
  • Short press recalls the scene,
  • long press 2s save the current brightness into the scene. the LED indicator will light up longer when save OK.

R2 1 zone CCT remote

• Color temperature+/-:
  Short press 11 levels, long press 1-6s for continuous 256 levels adjustment.

• Brightness+/-:
  Short press 10 levels, long press 1-6s for continuous 256 levels adjustment.

• Scene 1/2:
  Short press recalls the scene, long press 2s save the current color into the scene. the LED indicator will light up longer when save OK.

RU4 4 zone dimming remote

• All on: Turn on all 4 zone light.

• All off: Turn off all 4 zone light.

• Zone 1-4 on:
  Short press turn on zone light, long press 1-6s increase brightness continuously.

• Zone 1-4 off:
  Short press turn off zone light, long press 1-6s decrease brightness continuously.

RU8 8 zone dimming remote

• All on: Turn on all 8 zone light.
• All off: Turn off all 8 zone light.
• Zone 1-8 on/off:
  Short press turn on/off zone light, long press 1-6s increase or decrease brightness continuously.

Safety information

1. Read all instructions carefully before you begin this installation.
2. When installing battery, pay attention to the battery positive and negative polarity. A long time without the remote control, remove the battery. When remote distance becomes smaller and insensitive, replace the battery.
3. If no response from the receiver, please re-match the remote.
4. Gently handle remote, beware of falling.
5. For indoor and dry location use only.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>