Jabra True Wireless Earbud User Manual
- June 7, 2024
- Jabra
Table of Contents
Elite 65t
User manual
Making life Sound Better
© 2017 GN Audio A/S. All rights reserved. Jabra ® word mark and logos are registered trademarks owned by the Bluetooth® SIG, Inc. and any use of such marks by GN Audio /S is under license.
Made in China
MODEL: OTE070 / OTE071 / CPB070
Declaration of Conformity can be found on www.jabra.com/doc
Welcome
Thank you for using the Jabra Elite 65t. We hope you will enjoy it!
Jabra Elite 65t features
- 4-microphone enhanced sound
- Customize your music
- Proven wireless connection
- Up to 15-hours battery
- Voice Assistant enabled
- 2-year warranty (dust & water). Registration is required with the Jabra Sound+ app
Jabra Elite 65t overview
Included accessories
How to wear
Insert the
earbud into your ear and rotate to fit comfortably. Ensure the microphone is
pointing towards your mouth.
Changing EarGels
For the optimal audio experience, it is recommended to try each of the
different EarGel sizes. The fit should feel tight and secure in your ear. The
medium EarGel is remounted on the earbuds. Ensure the EarGel is firmly
attached.
How to charge
With up to 5 hours of battery in the earbuds, and 2 recharges in the charging case, the Jabra Elite 65t offers up to 15 hours of playtime.
Opening the charging case
Firmly old the charging case and press the small tab on the lid while opening the lid.
Charging
the earbuds
Place the earbuds in the charging case and close the lid. The battery LED inside the charging case will flash red, yellow or green when the lid is opened to indicate the earbuds current battery status.
It takes approx. 2 hours to fully recharge the earbuds. If the earbuds are at low battery, you will get up to 1 hour of playtime by charging them in the charging case for 10 to 20 minutes.
Charging the charging case
Plug the charging case into a USB power supply or certified wall charger. It
takes approx. 2 hours to fully charge the earbuds and the charging case.
The charging case is designed to charge using a standard USB voltage. It is
not recommended to charge using a higher voltage.
Note: non-certified chargers may take longer to charge.
What the LEDs mean
EARBUD STATUS
| | High battery/Power on
| Medium battery
| Low battery/Off
| Very low battery/ Power off
| Connecting/Incoming call
| Pairing
| Resetting
EARBUD BATTERY STATUS
|
| High battery
| Medium battery
| Low battery
CHARGING CASE STATUS
|
| Charging – high battery
| Charging – medium battery
| Charging – low battery
| Firmware updating
| Fully charged
How to pair
Pairing with a smartphone
- Ensure the right earbud is turned off and not in the charging case. To manually turn off the earbud, hold the Multi-function button until the LED flashes red.
- Next, hold the Multi-function button on the right earbud for 5 seconds until you hear the connection instructions in the earbud and the LED flashes blue. Release the button, and follow the voice-guided instructions to pair to your smartphone.
- You may need to hold the Volume down button for 1 second on the left earbud to turn it on.
How to use
Turn the earbuds on/off
Place the earbuds in the charging case to turn them off, or remove them from
the charging case to turn them on.
The earbuds can be turned on or off individually by holding the Multi-
function button on the right earbud, or the Volume down button on the
left earbud, until the LED flashes green (on) or red (off).
Mono earbud use
The right earbud can be used alone for mono playback or for calls. For volume
and/or skip track controls, please use your connected smartphone.
When both earbuds are turned on and within 20 centimeters (8 inches) of one
another, they will automatically relink.
Calls & music
Right earbud
|
Calls & music
---|---
| Play/pause music| Press the Multi-function button
Answer/end call| Press the Multi-function button
Reject call| Double-press the Multi-function function button when there is an
incoming call
Voice assi tant(Siri, Google Assistant, Alexa)| Hold (1 sec) the Multi-
function Multi-function button when not on a call
HearThrough
on/off
| Double-press the Multi-function Multi-function button when not on a call
Left earbud
|
Calls & music
---|---
| Adjust volume| Press the Volume up Volume up or Volume down button
Skip track| Hold (2 secs) the Volume Volume up or Volume down button
when listening to music
Battery status| Press the Volume up Volume up or Volume down button when
not on a call or listening to music
HearThrough
HearThrough utilizes built-in microphones to enable you to pay attention to your surroundings and engage in conversation without needing to remove the earbuds. HearThrough settings can be configured using the Jabra Sound+ app.
Right earbud
|
Hear Through
---|---
| HearT through on/off| Double-press the Multi-function button when not
on a call
Sidetone
Sidetone enables you to hear your own voice when you are on a call.
Sidetone settings can be configured using the Jabra Sound+ app.
Auto-pause music
When you remove an earbud from your ear while listening to music, the music
will automatically pause.
To unpause the music, place the earbud back into your ear within 60 seconds.
After 60 seconds (or when mono playback is preferred) the music can be
unpaused by pressing the Multi-function button.
Auto-pause music settings can be configured using the Jabra Sound+ app.
Auto power off
To conserve battery the right earbud will automatically power off when it is
out of range of your smartphone for 15 minutes and is not in the charging
case, or when it has been inactive for 1 hour.
The left earbud will automatically power off when it has not had a link with
the right earbud for 15 minutes and is not in the charging case.
To power, the earbuds on, place them in the charging case, or hold the Multi-function button on the right earbud, and/or the Volume down button on the left earbud, until the LED flashes.
Multiple call handling
| Right earbud | Multiple call handling |
|---|---|
| End current call and answer an incoming call | Press the Multi-function |
button
Put the current call on hold and answer an incoming call| Hold (2 secs) the
Multi-function button
Switch between held call and active call| Hold (2 secs) the Multi-
function button
Reject incoming call, when on a call| Double-press the Multi-function
button
Multi-use
The earbuds can be paired to two smartphones at once and can accept multiple
incoming calls from either smartphone.
To pair to two smartphones, use the normal pairing process separately for each
smartphone (refer to section 5).
Note: Voice assistant will be activated on the last paired smartphone.
Voice guidance and languages
Voice guidance can be turned on/off and the language can be changed using the Jabra Sound+ app.
The following languages are available: French, German, Japanese, Chinese.
Voice assistant
To activate your smartphone’s voice assistant (e.g. Siri, Google Assistant,
Alexa) hold the Multi-function button when not on a call.
To change Voice assistant, download the Jabra Sound+ App and go to the Voice
assistant settings.
Voice assistant settings can be configured using the Jabra Sound+ app.
Update firmware
The Jabra Elite 65t can be updated to the latest firmware version using the
Jabra Sound+ app.
If notifications are enabled in the Jabra Sound+ app you will receive an
automatic notification when a firmware update is available.
How to reset
Resetting the earbuds clears the list of paired devices and resets all
settings.
Right earbud
|
Reset earbuds
---|---
| Reset pairing list and settings| Hold (10 secs) the Multi-function
button until the LED flashes purple.
The earbuds will need to be repaired to your smartphone.
Jabra Sound+ app
Support
FAQ
View the FAQs on Jabra.com/help/elite65t.
How to care for your earbuds
- Always store the earbuds in the charging case and safely protected them.
- To prevent the depletion of the battery lifetime or capacity, avoid storing the earbuds in hot or cold environments, such as a closed car in summer, or in winter conditions.
- It is recommended to keep the earbuds between 15°C and 25°C (59°F and 77°F).
- Do not store the earbuds for extended periods of time without recharging them (max. three months).
- If the earbuds or the charging case become dirty, it is recommended to clean them with a soft, lint-free cloth that has been dampened with clean water.
- Remove and clean the eargels regularly to avoid earwax buildup on the speakers.
- The charging case is designed to charge using a standard USB voltage. It is not recommended to charge using a higher voltage.
Replacement accessories
Replacement or additional accessories can be purchased online at jabra.com/accessories.
Using the replacement earbuds
The replacement earbuds cannot be used with your old earbuds.
1. Place the replacement earbuds into the charging case and close the lid.
2. Open the charging case lid and remove the earbuds.
3. Wear the earbuds and follow the voice instructions to pair to your
smartphone.
4. Update the earbud firmware using the Jabra Sound+ app.
Using a replacement charging case
Before using a replacement charging case for the first time, it will need to be synced with your current earbuds and charged for 1 hour. To begin syncing, place your current earbuds inside the replacement charging case, and close the lid. The LED on the charging case may flash purple to indicate that the firmware is being updated. Please wait until the LED stops flashing purple before opening the charging case.
jabra.com/elite65t
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>