SAGE LU MEI RT2 Touch Wheel RF Remote Controller Instruction Manual
- June 4, 2024
- SAGE LU MEI
Table of Contents
RT2 Touch Wheel RF Remote Controller
Instruction Manual
RT2 Touch Wheel RF Remote Controller
1 and 4 zones CCT/Touch color wheel/Wireless remote 30m distance/AAAx2 battery
Features
- Apply to dual color(warm white + cool white) LED controller.
- Ultra-sensitive color adjustment touch wheel.
- Each remote can match one or more receivers.
- AAAx2 battery powered.
- Operate with LED indicator light.
Technical Parameters
I nput and Output
Output signal| RF (2.4GHz)
Working voltage| 3VDC (AAAx2)
Working current| ＜5mA
Standby current| ＜10μA
Standby time| 1 year
Remote distance| 30m(Barrier-free space)
Environment
Operation temperature| Ta: -30°C ~ +55°C
IP rating| IP20
Safety and EMC
EMC standard (EMC)| EN301 489, EN 62479
Safety standard(LVD)| EN60950
Radio Equipment(RED)| EN300 328
Certification| CE,EMC,LVD,RED
Warranty
Warranty| 5 years
Weight
Gross weight| 0.048kg
Net weight| 0.088kg
Mechanical Structures and Installations
To fix the remote, two options are offered for the selection
Option 1: fix the remote’ back holder on the wall with two screws.
Option 2: adhere the remote’ back holder to the wall with a paster.
Operation
- When turning on the light, the indicator displays blue. when turning off the light, the indicator display red.
- When touching the color wheel, the indicator will display the same color.
- When the press or touch operation is invalid (If the light is off), the indicator display red.
- To extend battery life, no touch or press key operation after a few seconds,
the touch wheel will enter the sleep state, you need to press any key to make the touch wheel quit the sleep state.
Match Remote Control (two match ways)
The end users can choose suitable match/delete ways. Two options are offered for selection:
Use the controller’s Match key
Match:
Short press the match key, and immediately press the on/off key (single zone
remote) or zone key (multiple zones remote) of the remote.
The LED indicator fast flash a few times means the match is successful.
Delete:
Press and hold the match key for 5s to delete all match, The LED indicator
fast flash a few times means all matched remotes were deleted.
Use Power Restart
Match:
Switch off the power, then switch on power again, and immediately short press
the on/off key (single zone remote) or zone key (multiple zones remote) 3
times on the remote. The light blinks 3 times means the match is successful.
Delete:
Switch off the power, then switch on power again, and immediately short press
the on/off key (single zone remote) or zone key (multiple zones remote) 5
times on the remote. The light blinks 5 times means all matched remotes were
deleted.
Key function
- RT2 1 zone CCT remote
: Turn on/off the light.
: Touch to change color temperature.
: Adjust brightness, short press 10 levels, long press 1-6s for continuous 256
levels adjustment.
: Get warm white or cold white directly.
: 25%, 50%, 75%,100% brightness.
: Short press recall the scene, long press 2s save current state into
S1/2/3/4. the LED indicator display green when saving OK.
- RT7 4 zones CCT remote
: Short press turn on/off all zone lights.
: Touch to change the current zone color temperature.
: Short press select and turn on zone light, long press 2s turn off zone
light. Short press the multiple zone key fastly, will select multiple zones
synchronously.
: Adjust the brightness for the currently selected zone, short press 10
levels, and long press 1-6s for continuous 256 levels adjustment.
: Get warm white or cold white directly
for the currently selected zone.
: Short press recall the scene, long press 2s save current state into
S1/2/3/4. the LED indicator display green when save OK. 4 zone recall or save
synchronously.
Safety information
- Read all instructions carefully before you begin this installation.
- When installing the battery, pay attention to the battery’s positive and negative polarity. A long time without the remote control, remove the battery. When remote distance becomes smaller and insensitive, replace the battery.
- If no response from the receiver, please re-match the remote.
- Gently handle the remote, beware of falling.
- For indoor and dry location use only.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>