LIVARNO LED Table Lamp Instructions
- June 6, 2024
- LIVARNO
Table of Contents
LIVARNO LED Table Lamp Instructions
PDF ONLINE
www.lidl-service.com
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.
Introduction
List of pictograms used
LED Table Lamp
Introduction
Congratulations on your new product. You have selected a high quality product.
The instructions for use are a part of the product.
They contain important information about safety, use and disposal. Before using the product, please familiarise yourself with all the operating and safety instructions. Only use the product as described and for the indicated purpose. When passing this product on to others, please be sure to include all its documentation. Before using this product for the first time verify the correct voltage and that all parts are properly installed.
Intended use
This light is only suitable for indoor use in dry and enclosed spaces. This product is intended for private household use only. This product is intended for normal operation.
Scope of delivery
Check immediately after unpacking that the parts are complete and that the
product is in proper condition.
- 1 Table lamp 14152102L / 14152202L
- 1 Glass shade
- 1 LED light bulb
- 1 Tool (14152202L)
- 1 Instructions for use
Parts description
- Illuminant
- In-line switch
- Mains plug
- Lamp base
- Lamp socket
- Lamp glass
- Threaded ring
- Flexible lamp arm (14152202L)
- Tool (14152202L)
Technical data
Model No.: 14152102L / 14152202L
Operating voltage: 230–240 V∼, 50 Hz
Lamp socket: E14
Protection class: II /
Bulb: LED E14, max. 5 W
Safety
Safety notices
Damage due to failure to comply with these operating instructions will
invalidate the warranty! We assume no liability for consequential damage! We
assume no liability for material damage or personal injury due to improper
handling or failure to comply with the safety instructions!
WARNING: RISK OF FATAL INJURY AND ACCIDENT HAZARD FOR TODDLERS AND SMALL CHILDREN!
Never leave children unattended with the packaging material. The packaging material represents a danger of suffocation. Children frequently underestimate the dangers. This device may be used by children aged 8 years and up, as well as by persons with reduced physical, sensory or mental capacities, or lacking experience and/or knowledge, when supervised or instructed in the safe use of the device and they understand the associated risks. Do not allow children to play with the device. Cleaning and user maintenance must not be performed by children without supervision.
RISK OF INJURY!
Do not leave the lamp or packaging material lying unattended. Plastic film or
bags, Styrofoam etc. can become dangerous toys for children.
Avoid the risk of fatal injury from electric shock
- Luminaire with strong conducted disturbances can cause nuisance triggering, it can be self-recovered.
- Always check the mains plug for damage before connecting the light to the mains. Never use the light if it shows any signs of damage.
- In the event of damage, repairs or other problems with the light, please contact the service centre or an electrician.
- Ensure that the light does not come into contact with water or other liquids under any circumstances.
- Never open or insert anything into electrical fittings or equipment (e.g. switches, fitting socket). This will pose a risk of fatal injury from electric shock.
- Only touch the insulated area of the mains plug when connecting to or disconnecting from the mains!
- To prevent hazards, a damaged flexible outer lead of this light may only be exchanged by the manufacturer, his service representative or by an equally qualified specialist.
- Before every use, verify the available mains voltage matches the required operating voltage of the light (see “Technical data“).
- Always unplug the mains plug, respectively, from the mains prior to assembly, disassembly, cleaning, or when the light will not be used for extended periods.
- Do not install the lamp on a wet or conductive surface.
Safe working
- Position the lamp so it is protected from moisture and dirt.
- Always be attentive! Always pay attention to what you are doing and use common sense.
- Do not cover the lamp with objects. Excessive heat can result in fire.
- Do not look into the illuminant from a close distance during operation.
- Do not use optical instruments to look at the illuminant.
- In order to disconnect the light completely from the power supply, the mains plug must be removed from the socket.
- Only use the light bulbs specified in the chapter “Technical data“.
Initial use
Mounting the lamp
Note: Remove all packaging materials from the product.
Your light is now ready to use.
Switching the light on / off
- Touch the In-line switch 2 to switch the lamp on or off.
Adjusting the light (14152202L)
CAUTION! RISK OF BURNS DUE TO HOT SURFACES!
Note: Never change the direction of the light while it is switched on.
- Allow the lamp to cool down completely.
- Adjust the flexible lamp arm 8 to the desired position.
Changing the light bulb
- Plug the mains plug 3 into a properly installed socket.
Your light is now ready to use.
Maintenance and cleaning
Disposal
hours can be obtained from your local authority.
Warranty and service
Warranty
You receive a 36 month warranty on this product, valid from the date of
purchase. The appliance has been carefully produced under strict quality
control. Within the warranty period we shall rectify without charge all
material and manufacturing defects. In the event that a defect arises during
the warranty period, please send the device to the listed service centre
address, quoting the following model number: 14152102L / 14152202L.
Wear parts (such as bulbs) and damage caused by improper handling, non- observance of the operating instructions or unauthorised interference are excluded from the warranty. The performance of services under the warranty does not extend or renew the warranty period.
Service address
Briloner Leuchten GmbH & Co. KG
Im Kissen 2
59929 Brilon
GERMANY
Tel.: +49 29 61 / 97 12–800
Fax: +49 29 61 / 97 12–199
E-Mail: kundenservice@briloner.com
www.briloner.com
Free service number:
Tel.: 00800 / 27456637
IAN 365679_2010
Please have your receipt and the item number (e.g. IAN 123456_7890) ready as
your proof of purchase when enquiring about your product.
Declaration of conformity
This product fulfils the requirements of the applicable European and national
directives. Conformity has been demonstrated. The relevant declarations and
documents are held by the manufacturer.
Manufacturer
Briloner Leuchten GmbH & Co. KG
Im Kissen 2
59929 Brilon
GERMANY
BRILONER LEUCHTEN GMBH & CO. KG
Im Kissen 2
59929 Brilon
GERMANY
Standder Informationen · Last Information Update
Ident.-No.: 14152102L / 14152202L012021-8
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>