NEOPODZ Wireless Earbuds User Manual
- June 4, 2024
- Neopodz
Table of Contents
NEOPODZ Wireless Earbuds
PARTS NAME
SPECIFICATION
- Model: NEOPODZ
- Bluetooth version:5.0
- Working distance:10m
- Play time: 4H
- Charging time: about 1H
- Charging interface: TYPE-C
- Single earphone battery capacity:40mAh
- Charging case battery capacity:650mAh
Pairing Your Earphone
Pairing with phone: Open the charging case, the earphone will connect each other automatically ,earphone indicator light flashes 3-5 seconds, then turn on the mobile phone’s Bluetooth search devIce, “PulseBuds” appears, click pairing. Pick up earphones from charging case and wear.
NOTICE
- Binaural mode, there ill only be a ” PulseBuds ” on the phone, When you want to use a earbud, just take one out.
- If you want to use a dual earphone, take out another earbud, and the earphone will automatically connect.
- After successfuly connecting for the first time, put the earbud back in the charging case to charge it, and then turn it on again,the earphone will automatically connect to the last connected device.
- IF the product has not been used for a long time, please charge it first. If the device cannot find this Bluetooth earphone, please Confirm whether the earphone is in pairing mode.
One button operation
Call with earphone
Listen to music with earphone
Turn off and Reset
Switch between Chinese and English prompt tone
TIPS
- In binaural mode, covering the earphone with either hand can cause poor signal;
- Make sure the earphone and the connected device are within a valid connection range and there are not too many obstacles that interfere with the signal;
- It is normal for the earphone to be disconnected occasional- ly. Just like WiFi, occasionally the connection is unstable. It may be due to interference in signal transmission. Please wait a moment or change the location to resolve;
- When the earphone cannot be connected to the device, please check whether the earphone has power or is connected to other devices;
- . The earphone cannot be connected to multiple devices at the same time. When changing the connected device, please perform the “Forget this device” operation on the last connected device.
Fault Table
The following conditions will not provide free repair
- No waranty card or product maintenance label is damaged;
- Damage caused by self-disassembly
- Failure caused by water ingress or fall and human+made mechanical damage;
- Malfunction or damage caused by force majeure.
Charging Your Earphone
For the first time use, please fuly charge the product.
Earphone charging
Please put the earbuds into the charging case. Charging: The indicator light
on the earphone is always on, and the first power indicator (left earphone)
and the third power indicator (right earphone) on the charging case are on for
10 seconds, and then jump to the power display. Full power: The white lights
off
Charging case charging
- Charging: The white lights flash
- Full power: The white lights stay on.
Welcome
Thank you for using the PulseBuds We hope you will enjoy it!
- Official package including
- Earbuds 2
- Charging case *1
- Charging cable”1
- User manual
Warnings
When charging the charging case of this product,to avoid damage to the
charging case, please use the supplied Standard data cable or a standard
wireless charging device use a 5v/2A charger, do not use a tast charging
charger exceeding 5V /3A. Charge the earphone according to the Supplied
instructions.
Precautions
Before using this product, carefully read this manual and retain It Tor Future
reference. AaaiuOnal warnings may De present On the product, packaging, or in
the user instructions.
Safety
Observe all warnings, precautions and instructions. CHOKING HAZARD-Small
parts. Not for children under years.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>