ALTMAN LIGHTING AFS-700 LED Follow Spot Instruction Manual

June 6, 2024
ALTMAN LIGHTING

ALTMAN logo

ALTMAN LIGHTING AFS-700 LED Follow Spot

ALTMAN LIGHTING AFS-700 LED Follow Spot image

PREFACE

About These Instructions
The document provides basic information on installation and operational instructions for a qualified, trained installer.These instructions provide information for the following product:

  • AFS-700 LED Follow Spot

Note: Additional product information, including a comprehensive manual with DMX mapping, menu operation, and more can be found on our web site at www.altmanlighting.com or by scanning the QR code to the right.

Please read all instructions before installing or using this product. Retain these instructions for future reference.ALTMAN LIGHTING AFS-700 LED Follow
Spot fig1

Have a question regarding these instructions?

The material in this document is for information purposes only and is subject to change without
notice. Altman Lighting assumes no responsibility for any errors or omissions which may appear in this document. Should you find an error, have a suggestion or question regarding your Altman Lighting product, we would love to hear from you.
You can reach us at:Altman Lighting
1400 East 66th Avenue
Denver, CO 80229
1-303-500-7072(Main)
www.altmanlighting.com
customerservice@altmanlighting.com

Note: Information contained in this document may not be duplicated in full or in part by any person without prior written approval of Altman Lighting. Its sole purpose is to provide the user with conceptual information on the equipment mentioned. The use of this document for all other purposes is specifically prohibited.

Our Commitment

Altman Lighting continually engages in research related to product improvement. New materials, production methods and design refinements are introduced into existing products without notice as a routine expression of the philosophy. For this reason any current Altman Lighting product may differ in some respect from its published description, but will always equal or exceed the original design specifications unless otherwise noted.
Version as of: 4 February 2021(Rev. 1) Part Number 49-0453
AFS-700 LED Follow Spot INSTALLATION INSTRUCTIONS / INSTRUCTIONS D’INSTALLATION
©2021 Altman Lighting. All rights reserved.

CLEANING AND CARE

WARNING! All cleaning should be performed with power completely removed from the luminaire. Never remove protective covers when luminaire is powered. Wear appropriate protective eye wear and gloves when cleaning the fixture. All service and maintenance, other than described herein, should be performed by a qualified technician or Authorized Service Center. AT NO TIME SHOULD THE LED BE TOUCHED. The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
WARNING! Under no circumstances should ammonia-based cleaners, acetone, or other harsh solvents be used on or near the AFS-700 LED Follow Spot. These types of cleaners or solvents can permanently damage the optics or housings of the fixture.
For all other service and maintenance issues, please contact your local Altman Lighting office or an Authorized Service Center.
WARNING! Disassembly (other than as described herein), alterations, unauthorized service, etc. will void the product warranty. Contact your local Altman Lighting office or an Authorized Service Center for technical support and service.

IMPORTANT INFORMATION

Product Safety Notices

When using electrical equipment, basic safety precautions should always be followed including the following:

  • a. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
  • b. Do not use outdoors unless the product is specified to operate in outdoor environments.
  • c. Do not mount near gas or electric heaters.
  • d. Equipment should be mounted in locations and at heights where it will not readily be subjected to tampering by unauthorized personnel.
  • e. The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition.
  • f. Do not use this equipment for other than intended use.
  • g. Refer service to qualified personnel.

SAVE THIS DOCUMENT FOR FUTURE REFERENCE.

Warnings

  • WARNING: RISK OF ELECTRICAL SHOCK! You must have access to a main circuit breaker or other power disconnect device before installing any wiring. Be sure that power is disconnected by removing fuses or turning the main circuit breaker off before installation. Installing the device with power on may expose you to dangerous voltages and damage the device. It is always recommended that a “lock out tag” device is installed on the appropriate circuit disconnect prior to beginning electrical work of any kind. A qualified electrician must perform this installation.
  • WARNING: Insulation between low-voltage supply and control conductors is provided by basic insulation.
  • WARNING: Refer to National Electrical Code® and local codes for cable specifications. Failure to use proper cable can result in damage to equipment or danger to personnel.
  • WARNING: This equipment is intended for installation in accordance with the National Electric Code® and local regulations. It is also intended for installation in indoor applications only. Before any electrical work is performed, disconnect power at the circuit breaker or remove the fuse to avoid shock or damage to the control. It is recommended that a qualified electrician perform this installation.
  • WARNING: This Lighting Fixture IS NOT for residential installation or use.
  • WARNING: The structure where fixture(s) is to be mounted must be capable of supporting the weight of the fixture and its accessories. This fixture is for temporary, portable mounting only.
  • WARNING: The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
  • THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY:

FCC NOTICE

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Altman Lighting Product Warranty

Warranty Term

Altman Lighting, Inc., a subsidiary of Altman Stage Lighting Company, Inc., herein referred to as Altman, warrants each new product (except for spare parts or products Altman does not manufacture) for a period of TWO (2) years from date of shipment to correct by repair or replacement any part defect due to faulty material or workmanship. Under these same terms products with an LED light source shall be warranted for a period of THREE (3) years.
Altman warrants for NINETY (90) days any spare part it manufactures. On spare parts or products Altman does not manufacture, including, but not limited to, lamps, sockets, lenses, roundels, electronics, ignitors, ballasts, etc.; Altman will grant the same warranty given Altman by its vendors.
Altman assumes no responsibility for damage or faulty performance caused by misuse, improper installation, careless handling or where repairs have been attempted by others.
This warranty is in lieu of all warranties or guarantees expressed or implied and no representative or person is authorized to assume Altman any other liability with the sale of Altman’s products.
For complete warranty terms and conditions, please refer to our web site at www.altmanlighting.com.

Warranty Service

In order to request warranty service, you must receive a Return Material Authorization (RMA) number prior to return.
Return shipments must be visibly marked with the RMA number; the product must be returned (shipping prepaid) to the factory at: Altman Lighting Inc. Attention: RMA # ___
1400 East 66th Avenue Denver, CO 80229
The return must be within THIRTY (30) days of receiving the RMA from Altman.

INSTALLATION AND SET UP

Overview

The AFS-700 LED Follow Spot is designed as a portable Follow Spot Luminaire and is for indoor use only.

Power Connection Warnings

Before performing any field wiring, refer to and read the warnings contained in “Important Information” on page 2.

WARNING! The AFS-700 LED Follow Spot should be connected to a constant circuit or a relay device. It should never be connected to a dimmer or circuit controlled by a dimmer. Read “Connecting Power” on page 3 carefully on how to properly connect your fixture.
WARNING! Note: the AFS-700 LED Follow Spot does not employ a powercon through connection. Each unit must be fed power individually via the connection method as noted on Page 3 of this Quick Start Guide

Connecting Power

Units are powered via an AC input cable from 100 to 240VAC, 50/60Hz and draw approximately 778Watts of power. Table 1, outlines the wire colors and their purpose.

Table 1: AC Input Wiring

Wire Color Purpose
Brown or Black Main / (L)ine
Blue or White (N)eutral
Green/Yellow or Green Ground / Earth

Note: See Figure 1 on page 4 for wiring connections.
IMPORTANT! The AFS-700 LED Follow Spot must be connected to and properly grounded to an viable earth ground.ALTMAN LIGHTING AFS-700 LED Follow Spot
fig2

Link to Manual

For a Full manual on the AFS-700 LED Follow Spot either scan the link below :

Scan QR code to go to the AFS-700 LED Follow Spot web page.ALTMAN LIGHTING
AFS-700 LED Follow Spot fig3

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals