HATHASPACE HSP003 Dual Filtration System Air Purifier Instruction Manual
- June 6, 2024
- HATHASPACE
Table of Contents
HATHASPACE HSP003 Dual Filtration System Air Purifier
READ AND SAVE THESE INSTRUCTIONS
Power Notice
- Only standard two pin socket is available.
- This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
- Please hold the plug but not pull the power line when you cut off power, otherwise, it may cause electric shock or fire accident because of short-circuit.
- Cleaning the dust of power line and plug timely.
- If the power line is damaged, please contact with the manufacturer or professional engineer to replace it.
- Please don’t use the machine without installing filters.
Notice When Using The machine
- Please don’t put anything into the air Inlet or air outlet
- Please don’t block up the air inlet or air outlet.
- Please don’t put the machine close to or above on heater (The area where may get
- access to inflammable gas, like stove).
- If it’s smoking or cause some particular smell, please cut the power off immediately
- If there are oil residue, flames, chemical smell in the air or room, please don’t use
- the machine.
- Please don’t use machine under the environment filled with inflammable gas like hydrogen, natural gas, avoid electric shock, fire accident and other damages.
Usage Restrictions
- To Reduce The Risk Of Fire Or Electric Shock, Do Not Use This Fan With Any Solid-State
- Speed Control Device.
- Please don’t use the machine in the places where uneven and easily fall down, bathroom where is high temperature, humid, avoid electric shock, fire accident or other damages.
- Please don’t clean and use the composite filter repeatedly; please clean the machine carefully because the strong corrosive cleaner may destroy the surface of the machine.
- Please use the soft cloth to clean the surface only, otherwise, it may be damaged or broken, and sensor be broken.
Cleaning notice
- Please don’t use the alcohol and organic solvent to clean, otherwise, it may destroy the product and cause electric shock or fire accident.
- Please pull the plug when you don’t use the machine or clean the machine, otherwise, it may cause electric shock or fire accident because of electrical short circuit.
- Keep some space around the air purifier so that the wind flow fluently to improve the purify efficiency.
- include instructions pertaining to a risk of fire, electric shock, or injury to persons, for cleaning and user-maintenance, such as lubrication.
Warm Tips
- This machine is not suitable for the following people: disabled people, perceptual handicapped, mentally dysgnosia or children.
- Children climbing is prohibited to prevent from being injured caused by machine falling down.
- Please turn off the machine and pull the plug when you move it.
HSP003 Machine & Parts
Product Components
Purification Process
- Pre Filter: Captures large particles like hair, dander, debris, etc.
- Composite Filter: H13 HEPA Filter: Filter over 99.9% of PM2.5 particles.
- Activated Carbon Filter: Removes VOCS like formaldehyde and benzene and unpleasant odors like smoke.
How To Use Air Purifier
CONTROL PANEL DIAGRAM
NOTICE: The device will turn off automatically when it’s toppled past 30°, set it right and let it reset before manual shut off. B. The blinks white when it’s time to replace your filter. This recommendation is based on hours used.
How to Replace Filter
- Take the filters out in proper order, put used filters into garbage bags to prevent contaminants from falling out.
Notice:
-
Filters are classified as nonflammable rubbish. Dispose of filters according to local regulations.
-
Your mesh pre-filter can be used repeatedly, wash and dry your filter regularly for optimal performance.
-
When installing the filter, make sure it’s facing the right way. It will fit snugly and easily.
NOTICE
-
In a high use environment the filter will need to be replaced more often.
-
Dispose of filters properly according to local guidelines. HEPA filters are classified as “nonflammable rubbish”.
-
To close the cover, match-up the slots on the bottom of the unit and cover so they align and click into place. Once the cover is closed, it is ok to turn the power back on.
-
Be sure to reset the “filter replacement reminder” after replacing the filters (please refer to instruction on page 08).
Trouble Shoot
If your air purifier is having issues, please check these common problems first.
The air purifier is not working.
| A. The plug is disconnected.
B. The front panel is not properly installed.
| A. Check and re-connect the plug.
B. Reinstall the front panel.
---|---|---
Peculiar smell around air inlet.
| ****
A. There are lots of pollutant causing sources in the room, like smoke from a BBQ.
B. The filters are heavily polluted.
| ****
A. Vent the room to allow pollutants to escape.
B. Replace new filters.
Working machine with low purification efficiency.
| ****
A. There are no filters installed.
B. The filter still has a bag on it.
C. The air purifier is placed in an area where airflow is blocked.
D. The filters are dirty.
| ****
A. Install a new HEPA filter.
B. Open the front panel, take the plastic bag off the filter.
C. Remove the obstruction or move unit to an open location.
D. Replace your filters.
The machine is very noisy.
| ****
A. The air purifier has a structural defect.
B. There are other items inside the air purifier.
| ****
A. Contact our Hathaspace services center.
B. Check and remove items.
Touch buttons are not working.
| ****
Child lock mode is turned on.
| ****
See page (08) for child lock/ unlock instructions.
The filters doesn’t fit easily.
| ****
The filters in facing the wrong way.
| ****
Insure the filters match the slots channels on the machine.
NOTICE: If you still can’t solve the problem after checking this list, contact with our service support team at 800-446-0535 or [email protected]. Please don’t repair it by yourself to avoid danger and damage to the machine.