HATHASPACE HSE1500 HARMONY 1500 Air Purifier User Manual
- June 9, 2024
- HATHASPACE
Table of Contents
- HATHASPACE HSE1500 HARMONY 1500 Air Purifier
- Basic Information
- Safety Instructions
- Product Diagram
- 4-in-1 Purification System
- Buttons and Indicators
- Air Purifier Maintenance
- Troubleshooting
- Limited Warranty
- Customer Support
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HATHASPACE HSE1500 HARMONY 1500 Air Purifier
NOTE : Remove plastic bag from filter before first use
READ AND SAVE THESE INSTRUCTIONS Use unit according to instructions provided in the manual. Keep manual for future reference. This appliance can be used by children aged 8 years and above and individuals with reduced physical, sensory, mental capabilities or lack of experience if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision
Basic Information
Model | HSE1500 |
---|---|
Power Supply | 120V / 60HZ |
Rated Power | 45W |
CADR | 250CFM |
Noise Level | 24dB-55dB |
Dimensions | 265 x 265 x 504mm |
10.43 x 10.43 x 19.84in
Net Weight| 4.10KG
Safety Instructions
This appliance is a floor type air purifier, to reduce the risk of fire, electric shock, or serious injury, basic safety precautions should always be followed when using electrical appliances. Please read and follow all the safety instructions before using and only use this air purifier as described in this manual. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to bypass this safety feature.
WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
- Do not use the air purifier in wet or humid environments, or outdoors. This appliance is designed for indoor use only.
- Do not put the air purifier on an uneven floor such as a bed or sofa. Always make sure to place the air purifier on a flat surface before operating. Leave more than 20 cm distance between the air purifier and the wall.
- Do not place the air purifier near sources of heat, such as stove tops, ovens, or radiators.
- Do not handle the unit with wet hands. Thoroughly dry your hands before handling any part of the air purifier.
- Do not use without removing the plastic wrap from the air purifier and filters.
- Do not attempt to use other filters with this appliance. Only use Hathaspace air replacement filters for this unit.
- Do not block the air inlet, outlet, as well as the sensor, by anything.
- Do not insert fingers or objects into the air outlet.
- Do not immerse air purifier in liquids or clean the appliance with any liquid to avoid electric shock and/or electrical fires.
- Do not run the power cord under carpeting, rugs, furniture, or appliances. Place the power cord away from high-traffic areas.
- Do not operate the unit if the power cord or plug is damaged. Doing so may result in injury or damage to the unit.
- Do unplug the appliance from the power supply before servicing.
- Do inspect the unit frequently. Dirt that has collected should be removed regularly to prevent excessive accumulation that may result in flashover or fire.
- Do not repair it by yourself if the air purifier does not work, it will void your warranty. If your appliance is no longer working, damaged, or not functioning properly, discontinue use, unplug immediately and contact customer support immediately.
Product Diagram
4-in-1 Purification System
Your Hathaspace filter uses 4 advanced technologies to keep your air clean, capturing airborne particles
-
Polypropylene Pre-filter
A preliminary Polypropylene Pre-filter removes large particles like pet hair, dust, and floating debris. This helps extend the life of the composite filter. -
Pre-filter
Non-woven materials serve as an extra pre-filter, capturing small corrosive particles. This extends the life of the H13 HEPA filter. -
Activated Carbon Filter
Activated carbon absorbs smoke, odors, and gases in the air including but not limited to formaldehyde, ammonia, sulfur dioxide, nitrogen oxide, toluene,acetic acid, trimethylamine, benzene, and acetaldehyde. Small microporous zeolite minerals are added to the carbon filter to remove heavy metals and combustion chemicals. -
H13 HEPA Filter
The high efficiency HEPA filter can capture small micron particles. These smaller particles make up the majority of harmful air pollutants like tobacco, smoke and lead dust.
Buttons and Indicators
Control Panel
LED Display
Air Quality Indicator
PM2.5
& AQI
| ≤50| 72.5%-100%| Excellent| 1| Green
---|---|---|---|---|---
51-100| 62.9%-72%| Good| 2| Blue
101-150| 55.1%-62.8%| Fair| 3| Yellow
150| 0.0%-54.9%| Poor| 4| Red
Particle Sensor
The sensor is placed inside the air purifier and can detect the air quality
intelligently
Particle Sensor
| ****
Manual Mode
| ****
Adjust fan speed based on your needs. Using the Air Quality Indicator, change the fan speed from 1 (low) to 4 (high) depending on the air quality.
---|---|---
Auto Mode| Purifies the air automatically in different fan speeds based on the
air quality detected by the sensor.
Eco Mode
| ****
Your air purifier uses up to 50% less energy when in Eco mode. Eco mode automatically turns the unit off and checks air quality every 10 minutes.
Note : The sensor assesses the air quality based on the air coming in through the outside small holes. To ensure continuous operation, please keep it clean using a soft brush to prevent any particle build-up.
Brightness Adjustment
There are six levels of light brightness. The light levels are pre-set at
these levels:
- The default brightness of lights is 100% (including all indicators and airquality lights).
- Press the brightness adjustment button to manually adjust the air quality indicator light levels as follows: 0%>20%>40%>60%>80%>100%
- Press the brightness adjustment button to manually adjust the LED display light as follows: 10%>20%>40%>60%>80%>100%
- The brightness is not memorized after the light is adjusted and it will still be 100% when the machine is turned on next time (unless you press and hold the brightness key for 3 seconds to set the memory brightness setting).
- After adjusting the brightness of the light, long press the brightness key for 3 seconds to set the memory light brightness. For example, if you want to set to 20%, long press for 3 seconds, the light brightness will be 20% after the next startup.
Air Purifier Maintenance
Cleaning the unit
- Please turn off the power and unplug power cord before cleaning the air purifier.
- To remove dust, lightly wipe the unit with a soft, clean cloth. If needed, wipe the unit with a clean damp cloth, then immediately dry with a clean dry cloth. Don’t use alcohol, oil, benzene to clean the unit.
- Do not immerse the unit in water.
Note : The HEPA filter, gray color non-woven pre-filter, and the activated carbon filter cannot be reused, cleaned, or replaced after being used. Please don’t wash them by water.
Replacing Filter
To maintain the performance of the air purifier and purification effect, we
advise to replace the filters every 4 months or 3000 hours. For the best
performance and longest lifespan, use certified HARMONY 1500 replacement
filters for HSE1500
- Unplug the air purifier from the electrical outlet.
- Twist the bottom panel counterclockwise to remove the panel.
- Remove the old filter and dispose of it properly. The filter is not recyclable
- Remove the new filter packaging and insert it into the air purifier.
- Turn it clockwise to tighten the bottom panel.
- Place the air purifier on the floor again and plug it back into the electrical outlet. The air purifier will automatically clean the air again.
Note:
- The actual replacement frequency depends on its service length and air quality.
- Please don’t forget to press the “Filter Reset“ button for 5 seconds to reset the air purifier, otherwise, the filter light will keep blinking.
Troubleshooting
Problem/Reasons/Possible Solution
Air purifier cannot be turned on or respond to button controls.
|
A. No electricity.
B. Power cord is damaged.
C. The outlet is damaged.
D. The air purifier malfunctioned.
| A. Check that the unit is properly plugged into an electrical outlet.
B. Contact Customer Service.
C. Plug into a different outlet.
D. Contact Customer Service.
---|---|---
Airflow is significantly reduced.
|
A. The airflow is blocked by packaging.
B. A low speed is being used.
C. There is not enough clearance for the air inflow.
D. The Pre-filter may be clogged by large particles.
E. Filters are installed incorrectly.
|
A. Remove the packaging.
B. Increase the fan speed.
C. Leave 20cm clearance on all sides of the air purifier.
D. Clean the Pre-filter or replace the filter.
E. Make sure the filters are installed correctly.
Air purifier makes an unusual noise while the fan is on.
|
A. The airflow is blocked by packaging.
B. The air purifier is on an inclined place making the fan blades rub with the air purifier’s lining.
C. The air purifier may be damaged or a foreign object may be inside.
|
A. Remove the packaging.
B. Put the air purifier on even places.
C. Contact Customer Service.
Strange smell comes from the purifier.
|
A. The filters have been used too long.
B. The applied environment has high humidity or is very dirty.
C. There may be residual odors from the manufacturing process.
|
A. Replace the filter.
B. Make sure not to use your purifie in an area with high humidity
or while diffusing essential oils.
C. Keep running it for 1 week.
Poor air purification quality.
|
A. A low speed is used.
B. The airflow is blocked by packaging.
C. The air outlet is blocked.
D. Filters installed incorrectly.
E. Is being used in open places.
F. The applied area is larger than the effective range.
G. The quality of the air in the room is very poor.
H. The room layout is not good.
|
A. Increase the fan speed.
B. Remove the packaging.
C. Remove any matter that is blocking the air outlet.
D. Make sure the filters are installe correctly.
E. Close doors and windows while the air purifier.
F. Consider a larger air purifier.
G. Open the window to circulate ne
H. Buy more air purifiers or change layout if possible.
Air purifier always detects high levels
of particulates.
|
A. The unit is operating in a very dusty environment.
|
A. Consider turning the fan to HIGH
The filter light is still on after replacing the filter.
| ****
A. Forgot to reset the air purifier.
| ****
A. Reset the air purifier by pressing the “filter light” button for 5 seconds.
---|---|---
The filter light isn’t on within 8 months.
| ****
A. The appliance has been running infrequently.
|
The filter light is on before 6 months.
| ****
A. The appliance is running too frequently or there is high air pollution.
| ****
A. Replace the filter.
Limited Warranty
Hathaspace warrants all products to be of the highest quality in material, craftsmanship, and service, effective starting from the date of purchase. Hathaspace will replace any product found to be defective due to manufacturer flaws based on eligibility. Hathaspace is not responsible in any way for any damages, losses, or inconveniences caused by equipment failure by user negligence, abuse, or use noncompliant with the user manual or any additional safety, use, or warnings included in the product packaging and manual. This warranty does not apply to the following:
- Damage due to abuse, accident, alteration, misuse, tampering or vandalism.
- Improper or inadequate maintenance.
- Damage in return transit.
Please see warranty details at https://www.hathaspace.com
Customer Support
Hathaspace strives to make every part of your experience exceptional. If you have any questions or concerns about your air purifier, please feel free to contact our Customer Support.
- Email : team@hathaspace.com
- Website : https://hathaspace.com
HEPA AIR PURIFIER HSE1500
Manufactured for Hathaspace EPA Est. No. 87627-CHN-1 © Hathaspace. All rights reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>