HATHASPACE HSE600 Harmony 600 1 Replacement Filter Instruction Manual
- February 25, 2024
- HATHASPACE
Table of Contents
**HATHASPACE HSE600 Harmony 600 1 Replacement Filter Instruction Manual
**
SAFETY INFORMATION
Follow all safety guidelines. Read all instructions before using.
- This air filter is only meant to be used with the Hathaspace Harmony HSE 600.
- After unwrapping, discard plastic and keep away from children.
- Damaged replacement filters may not properly purify the air.
- Contact our team immediately if you have received a damaged replacement filter set.
MAINTENANCE GUIDELINES
To maintain the performance of the air purifier and purification effect, we advise to replace the filters every 3-4 months or 2000 hours.
PURCHASING ADDITIONAL REPLACEMENT FILTERS
To ensure the warranty for your air purifier remains active and to avoid
shortening the life of your air purifier, use only certified Hathaspace
filters. To purchase more replacement filters, go to
hathaspace.com/filterclub or scan the QR
code to the right with your smart phone camera.
For more information on filters, you can visit our official website www.hathaspace.com.
CUSTOMER SUPPORT
Email: team@hathaspace.com
Phone: (800) 446-0535 Customer Support
*Please have your order confirmation number ready before contacting us.
HOW TO INSTALL
To maintain the air purifier’s performance and purification effect, we suggest replacing the filters every 3-4 months, 2000 hours or as the filter indicator displays.
-
Unplug the air purifier from the electrical outlet.
-
Twist the bottom panel counterclockwise to remove the panel.
-
Remove the old filter and dispose of it properly. The filter is not recyclable.
-
Remove the new filter packaging and insert it into the air purifier.
-
Turn it clockwise to tighten the bottom panel.
-
Place the air purifier on the table again and plug it back into the electrical outlet. The air purifier will automatically clean the air again.
Note:
- The actual replacement frequency depends on use and air quality. If it is on day and night or your surrounding air is highly polluted, it will need to be replaced sooner.
- Please remember to press the “Filter Reset” button for 3 seconds to reset the air purifier, otherwise, the filter light will keep blinking.