SaitaKE STK-I5 Wireless Controller for NS User Manual

: June 6, 2024
: Saitake

Table of Contents

SaitaKE STK-I5 Wireless Controller for NS
Instruction
Operation
T (Turbo) Function
Turbo Indication
Charge & Update
Factory Motion Calibration
Product Specification
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SaitaKE STK-I5 Wireless Controller for NS

Instruction

SaitaKE STK-I5 Wireless Controller for NS-fig2

Operation

Switch console settings
Turn on the N-S console, press the Setting on the menu, click successively System Setting – Airplane Mode – Controller Connection – to turn on the Bluetooth function.
Connection on Bluetooth
- Power on the controller by pressing the button of on the left controller and the button of on the right controller, the 4 led will flash circularly.
- Turn on the home screen of the console, click the Controller on the menu, then click the Change grip/order, the console will be searching and paring the controllers automatically. Press L1+R1 button after connecting the console, Press the A button quit the menu, choose the Close to quit then you can start the game.
Reconnection on Bluetooth
Power on the console, press Button and on left and right controller, the Controller will automatically to connect to console with vibration shortly.
Note:
The controller had been Paired & Connected with the console and the console’s Bluetooth should be turned on.
Connection on wired
- Plugin both left & right controllers into the console, and confirm the controller touched the console well.
- Power on console, then press A button on the right controller. Both left & right controllers will connect to the console.
- You can start your gaming by pressing buttons.

T (Turbo) Function

T (TURBO) button function:
TURBO buttons have 3 gears: TURBO/AUTO/CLEAR
TURBO → AUTO → Cancel (3 functional cycles)
The speed of the Turbo is 20 rounds per second;
Turbo Function Set:
First hold T, then hold one of the function keys to set turbo function. Release both buttons, the set is completed.
Auto Function Set:
Press T first, then press the button that had been set
Turbo function to set the AUTO function.
Quit Auto Set:
First, press the T key, press the button that has been set Auto function to quit set.
Unset:
Long press T for 5 seconds, TURBO indicator lights off, release the button to complete

Turbo Indication

The TURBO indicator will always turn on after the TURBO function has been set with the buttons.
During execution, the indicator light flashes in the flicker mode twice a second (as indicated by the AUTO function).
No TURBO key setting function, the indicator light is not on.

Charge & Update

Charge For Controllers
The controller is not connected: When charging, the indicator light of the four channels flashes slowly at the speed of once a second.The indicator light will goes out with full power charged. The controller is connect by wireless: When charging, the indicator light of the corresponding channel will flash slowly at the speed of 1 second once. When the battery is full, the indicator will return to the normal indicating state.

Factory Motion Calibration

Left controller calibration method:
make sure the controller is power off, long-press the combination key “UP+L1+ Screenshot” to power on the controller. The four LED lights are divided into two groups of alternating flashing instructions. Place the controller on flat, stable surface and press the “-” key to complete the calibration.

Right controller calibration method
make sure the controller is power off, long-press the combination key “X+R1+HOME” to power on the controller.The four LED lights are divided into two groups of alternating flashing instructions. Place the controller on flat, stable surface and press the “+” key to complete the calibration