Saitake STK-7024S SWITCH WIRELESS GAMEPAD User Manual
- June 5, 2024
- Saitake
Table of Contents
STK-
7024S
Use Manuel
First Time to Pair & Connect
(Power on your console,then follow the steps to pair and connect your
controller.)
Step 1:Find Controllers Option.-Image1
Step 2:Click Change Grip/Order.-Image2
Step 3:Press the Y+HOME button to power on the gamepad for 5 seconds till 4
LED lights flashes fastly, waiting for the connection to
complete.-Image3
*Please make sure turn off the Airplane Mode when you connect a controller to the switch console.
Reconnect(HOME)
Reconnect: Press HOME Button
If your controller was once paired and connected to your console, press the
HOME button to rapidly connected next time.
Note:
For reconnecting, please turn on the switch console firstly, does not support
pressing the HOME button to wake up the console under sleep mode.
When one of the following conditions occurs, please reconnect referring to the
first time to pair and connect.
- Upgrade
- Reset
- You can not reconnect to the console by pressing the HOME button.
Adjust Vibration Intensity
There are 3 levels of vibration intensity: weak, moderate, and strong
Step 1: Please make sure you connect the controller to the switch console.
Step 2: Press 4 buttons (L, ZL, R, and ZR) simultaneously for 5 seconds.
Step 3: Then release the 4 buttons when you feel the vibration.
The vibration mode can be adjusted by repeating the above operations.
FCC DECLARATION
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.