Shenzhen Saitake Electronic STK-4006L P4 Wireless Controller User Manual
- June 6, 2024
- Shenzhen Saitake Electronic
Table of Contents
For P4 Wireless Controller User Manual
EN/ES/FR/DE/IT
Before use
Carefully read this manual and any manuals for compatible hardware. Retain instructions for future reference. Always update your system to the latest version of system software.
Precautions
Safety
- Avoid prolonged use of this product. Take a 15-minute break during each hour of play.
- Stop using this product immediately if you begin to feel tired or if you experience discomfort or pain in your hands or arms during use. If the condition persists, wrist* a doctor.
- If you experience any of the following health problems, discontinue the use of the system immediately. If symptoms persist. consult a doctor. -Dizziness. nausea, fatigue, or symptoms similar to motion sickness. -Discomfort or pain in a part of the body, such as eyes ears, hands, or arms.
- The product is intended for use with the hands only. Do not bring it into close contact with your head, face, or the bonds of any other part of the body.
- The vibration function of this product can aggravate injuries. Do not use the vibration function if you have any ailment or injury to the bone joints or muscles of your hands or arms. You can turn on or turn off the vibration function from (setting) on the function screen.
- Permanent hearing loss may occur if the headset or headphones are used at high volante.set the velum to a safe level. Over time, increasingly loud audio may start to sound normal but can actually be damaging your hearing. if you experience ringing or any discomfort in your ears or muffled speech, stop listening and have your hearing checked. The louder the volume, the sooner your hearing could be affected. To protect your hearing:
-Limit the amount of time you use the headset or headphones at high volume.
-Avoid raising the dome to block out noisy surroundings.
-Lower the volume if you can’t hear people speaking near you. - Avoid looking into the It bar of the controller when it is flashing. Stop using the controller immediately if you experience any discomfort or pain in any body parts.
- Keep the product out of the reach of small children. Young children might damage the product causing it to malfunction, swallow small parts, wrap the cables around themselves or accidentally injure themselves or others.
Use and handling
When using the controller.be aware of the following points. -Before use make sure that there is plenty of space around you. -Firmly grip your controller to prevent it from slipping out of your grasp and causing damage or injury. -When using your controller with a USB cable, ensure that the cab cannot hit a person or any object and do not pull the cable out of the PiayStaion4 system whilst playing.
- Do not allow liquid or small particles to get into the product.
- Do not alow touch the product with wet hands.
- Do not throw or drop the product or subject It to strong physical shock.
- Do not put heavy objects on the product.
- Do not touch the inside of the USB connector or insert foreign objects
- Never disassemble or modify the product.
Exterior protection
Follow the instructions below to help prevent the product exterior from deteriorating or becoming discolored.
- Do not place any rubber or vinyl materials on the product exterior for an extended period of time.
- Use a soft, dry cloth to clean the product. Do not use solvents or other chemicals. Do not wipe with a chemically-treated cleaning cloth.
Storage conditions
- Do not expose the product to high temperatures, high humidity, or direct sunlight,
- Do not expose the product to dust, smoke or steam.
Pair your controller
You need to pair your controller when you use it for the first time and when you use it with another P4 system. Tum on the P4 system and connect the controller with the USB cable to complete device pairing
Hint
When you press the U button, the controller turns on and the light bar glows in your assigned color. The color that is assigned depends on the order in which each user presses the U button. The first controller to connect is, with subsequent controllers gloving red, green, and pink. For details on using the controller, refer to the user’s guide of the P4 system.
Charging your controller
With the PS4 system turned on or in rest mode. connect your controller using the USB cable.
Hint
You can also charge your controller by connecting the USB cable to a computer to another USB device. Use a USB cable that complies with the USB standard. You might not be a* to charge the controller on some devices.
Charging your controller
Caution-using the built-In battery:
- This product contains an Itthiurrrion rechargeable battery.
- Before using this product. read al the instructions for handing and charging the battery and follow them carefully.
- Take extra care when handling the battery. Misuse can cause fire and bums,
- Never attempt to open, crush, heat, or set fire to the battery.
- Do not leave the battery charging for a prolonged period of time when the product is not in use.
- Always dispose of used batteries in accordance with local laws or requirements.
- Do not handle the damaged or leaking battery. of the internal battery fluid leaks, stop using the product immediately, and contact technical support for assistance. lithe fluid gets onto your clothes, skin, or into your eyes, immediately rinse the affected area with clean water and consult your doctor. The battery fluid can cause blindness.
Battery life and duration:
The battery has a limited rife pan. Battery charge duration gradually
decreases with repeated usage and age. Battery life also varies depending on
the storage method, usage state, environment, and other factors.
Charge in an environment where the temperature range is between
10°C-30°CoCharging may not be as effective when performed in other
environments. Battery duration may vary depending on the usage condition and
environmental factors.
When not in use: When the contractor is not used for an extended period of
time. it is recommended that you fully charge it at least once a year in order
to maintain its functionality.
Specifications
Input power rating | DC 5V,600tvta |
---|---|
Battery type | Built-in rechargeable Lithium-ion battery |
Voltage | DC 3.65V |
Battery capacity | 600mAh |
Operation temperature | 5°C-35°C |
Mass | Approx. 210g |
Country of Production | China |
Design and specifications are subject to change without notice.