Saitake STK-7036 Wireless Gamepad for N-S Console User Manual
- June 5, 2024
- Saitake
Table of Contents
Wireless Gamepad for N-S console
STK-7036
**Use manual
**
Buttons Instruction First Time to Pair & Connect
Pair & Connect: Press the SYNC button
(Power on your N-S Console, then follow the steps to pair and connect your
controller.)
Step 1:Find Controllers Option.-Image1 Step 2:Click Change Grip/Order.-Image2
Step 3:Press SYNC button to power on the gamepad,4 LED lights blink in turn,
waiting for the connection to complete.-Image3 Please make sure to turn off
the Airplane Mode when you connect the controller to the switch console.
Reconnect(HOME)
Reconnect: Press HOME Button If your controller was once paired and
connected to your N-S console, press the HOME button to rapidly connected next
time.
Note:
The gamepad support pressing the HOME button to wake up the console under
sleep mode. you just need to press the HOME button to finish reconnecting.
When one of the following conditions occurs, please reconnect referring to the
first time to pair and connect.
- Upgrade
- Reset
- Change the console.
Adjust Vibration Intensity
There are 3 levels of vibration intensity:weak, moderate and strong
Step 1: Please make sure you connect the controller to the switch
console.
Step 2: Press 4 buttons (L, ZL,R, and ZR) simultaneously for 5 seconds.
Step 3: Then release the 4 buttons when you feel the vibration.
The vibration mode can be adjusted by repeating the above operations.
Adjust Turbo Speed
Buttons can be set to the turbo speed (is called for short function buttons):
A/B/X/Y/L/ZL/R/ZR button
Enable/disable the TURBO speed function:
Step 1: Press the Turbo button and one of the function buttons
simultaneously, to enable the Turbo speed function.
Step 2: Repeat step1,to enable the AUTO function.
Step 3: Repeat Step 1 to disable the AUTO function.
Adjust TURBO speed:
Press the TURBO button simultaneously the directional button Up / Down,
Press the TURBO+Direction UP button to adjust the TURBO to faster.
Press the TURBO+Direction DOWN button to adjust the TURBO to slower.
Android Connection
Pair & Connect Thirsty:
Step 1: Press the A+HOME button to power on the gamepad, LED2+LED3 will
be twinkling and wait for pairing.
Step 2: Open the interface of Settings on an android device, open
Bluetooth.
Step 3: Scan the bt devices and get the device name of Gamepad, click the
device into Paring and connect automatically.
Step 4 :LED2+LED3 indicator will be long on after connected successfully.
Reconnection:
Long press the HOME button to power on the gamepad, it will connect
automatically.
Xbox MODE for IOS13.0+ & Android
Pair & Connect Thirsty:
Step 1 :Press X+HOME button to power on the gamepad, LED1+LED4 will be
twinkling and wait for pairing.
Step 2: Open the interface of Settings on an android device, and open
Bluetooth.
Step 3 :Scan the bt devices and get the device name of Xbox Wireless
Controller, click the device into Paring and connect automatically.
Step 4: LED1+LED4 indicator will be long on after connected successfully.
Reconnection:
Long press the HOME button to power on the gamepad, it will connect
automatically.
PCConnection (X-input)
Plug the type-C cable into the charging port, and plug the USB port to a
computer,it will work after the windows system is identified automatically.
After connecting the LED1, LED4 will be twinkling.
Note:
- While plugging off the USB port from the computer, the gamepad will into the status of paring.(The last bt connect status)
- If there is a device connected gamepad before, and the Bluetooth function is opened, the gamepad will connect with the device automatically.
- If there is no device connected with the gamepad before, the gamepad will turn into the status of Scan & Match.
- The gamepad will power off after 5-10 seconds without any operation.
Program Buttons Setting
-
Long press the programming key for 2 seconds to enter the programming mode, LED5 programming indicator light flashes with a frequency of 4 times in 1 second, press the keys you want to program, and then press M1 or M2 to program the corresponding keys, the indicator led is light long on and bright to complete programming.
Remark:
1.1 This programming function can only replace the key function to M1 or M2, it cannot carry out macro definition programming;
1.2 If multiple buttons are pressed at the same time, only the first button is recognized; -
The gamepad enters programming mode. If it is not programmed in 10 seconds, the programming function will be turned off.
-
If the key function has been programmed on the M1 or M2 key, then enter the programming mode to program the key, the original programmed key will be covered, and the new key function will be programmed
-
Programming keys to clear: long-press the key combination 1 second “M1 + programming key” or “M2 + programming key, then remove the key programming function, if two keys are programming, removing a key indicator light flashes in a 1 second after the 8 (1 second) normally on, two buttons are clear indicator light is put out after the programming function (button without programming function indicator light is put out state)
FCC Information and Copyright
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC RF warning statement: the device has been evaluated to meet general RF exposure requirements, The device can be used in portable exposure conditions without restriction.
Documents / Resources
|
Saitake STK-7036 Wireless Gamepad for N-S
Console
[pdf] User Manual
STK-7036, STK7036, 2ATI7STK-7036, 2ATI7STK7036, STK-7036 Wireless Gamepad for
N-S Console, STK-7036, Wireless Gamepad for N-S Console
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>