SaitaKE STK-7032SN Wireless Gamepad for N-S User Manual

SaitaKE STK-7032SN Wireless Gamepad for N-S

First Time to Pair & Connect

Pair & Connect: Press Y+HOME button n(Power on your N-S console, then follow the steps to pair and connect your controller.)

• Step 1: Find Controllers Option.-Image1
• Step 2: Click Change Grip/Order.-Image2
• Step 3: Press Y+HOME button power on gamepad,4 LED lights blink in turn,waiting for the connection to complete.-Image3

Please make sure turn off the Airplane Mode when you connect the controller to N-S console.

Reconnect (HOME)

Reconnect: Press HOME Button
If your controller was once paired and connected to your N-S console, press the HOME button to rapidly connected next time.

Note:
For reconnecting, please turn on the N-S console firstly, does not support press HOME button to wake up the console under sleep mode.

When one of the following conditions occur, please reconnect referring to first time to pair and connect.

1. Upgrade
2. Reset
3. You can not reconnect to the N-S game console by pressing the HOME button.

Adjust Vibration Intensity

There are 3 levels of vibration intensity: weak, moderate and strong

• Step 1: Please make sure you connect the controller to the N-S console.
• Step 2: Press 4 buttons (L, ZL, R and ZR) simultaneously for 5 seconds.
• Step 3: Then release the 4 buttons when you feel the vibration.
  The vibration mode can be adjusted by repeating the above operatons.

Adjust Turbo Speed

Buttons can be set to the turbo speed (is called for short function buttons):
A/B/X/Y/L/ZL/R/ZR button Enable/disable the turbo speed function:

• Step 1: Press the Turbo button and one the function button simultaneously, to enable the Turbo speed function.
• Step 2: Repeat step1,to disable the Turbo speed function.

Adjust turbo speed :

• Press the Turbo button simultaneously the directional button Up / Right / Down, Directional button UP is the mostly fast speed.
• Directional button Right is the middle speed.
• Directional button Down is the slowly speed.

Please hold the amiibo to touch the middle part of the upper panel of the controller.

PC X-Input function

Connect the gamepad with the Type-C cable to computer, after the computer is recognized automatically, it will work with X-Input mode on the windows system.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2.  this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>