DOOGEE CR1 Smartwatch User Manual
- June 6, 2024
- DOOGEE
Table of Contents
DOOGEE CR1 Smartwatch
Watch quick instructions
Watch charging and activation
Before using the watch for the first time, it needs to be charged and
activated. Use the equipped magnetic charger to attach to the metal spot on
the surface of the watch, and connect the other end of the charger to the USB
charging head or the computer USB port.
Install watch APP
Scan the OR code or enter the major application markets to download and
install “GloryFit”
Equipment requirements:
ios 8.0 and above; Android 4.4 and above, supporting Bluetooth 4.0.
- Open the mobile client to set personal information
- Switch to the “‘Device”‘ page, and click Bind device
- Click your device in the scanned device list
- The binding is complete.
Main function interface
Main interface/dial
On the main interface, long press the touch screen to enter, swipe left and
right to switch, and click confirm. Any choice of 6 styles of dial.
Introduction to interface functions
Step count/distance/calories
Check the number of steps walked, distance walked and calories burned at any
time in a day. It can be synchronized to AP in time to view exercise data.
Heart rate interface
Switch to the heart rate test interface to enter the heart rate real-time
monitoring, the measurement data can be synchronized to the AP in time, and
there is a test report.
Sleep monitoring
When you fall asleep, the watch will automatically determine that you have
entered sleep detection, automatically detect your deep sleep/light
sleep/waking time all night, and calculate your sleep quality; detailed sleep
data only supports APP viewing for the time being.
Weather interface
The weather information interface needs to be synchronized with the mobile app
to get the weather information (the weather information comes from China
Weather Network, and there may be inconsistencies with third-party weather
forecast information)
Music interface
After connecting the watch and the mobile phone via Bluetooth, enter the music
interface of the watch and click the corresponding icon to control the mobile
phone to switch functions such as play /next/previous.
Message interface
Swipe on the main interface to enter the message interface, click the message
icon to view the information, turn the page on a stand-alone machine, and exit
after viewing the message or swipe right to exit.
Stopwatch
Tap the stopwatch icon to enter the stopwatch function. Swipe right to exit.
Motion interface
Click the exercise icon to enter the exercise mode detection. Walking,
running, cycling, etc. (any choice of 13 sports modes) swipe up and down to
switch sports modes, swipe right to exit the current sports mode
Setting function interface
Swipe down on the main interface to enter the setting function interface, you
can select the “Do Not Disturb Mode, Settings, Find Phone, About, Brightness
Adjustment” option, click the icon to enter the corresponding setting function
Shutdown interface
Click the shutdown page to enter, and you can shutdown.
Restore interface
Click the restore icon to enter to restore the watch.
Find mobile interface
When connected, click the “find” icon to enter, click, the phone will vibrate
or ring to remind you.
Brightness adjustment interface
Click the brightness adjustment icon to freely select the screen brightness.
About the interface
Click the about icon to display the machine model and the last four digits of
the Bluetooth address.
message notification
For sedentary reminders, call reminders, goal achievement reminders, alarm
clock reminders, and reminders, you need to turn on the reminder switch on the
APP side, and keep the phone and watch Bluetooth connected successfully, and
there is a message that vibrates and brightens the screen.
Matters needing attention
- It is forbidden to use an adapter with a charging voltage greater than 5V and a charging current greater than 2A, and the charging time is 2-3 hours
- It is prohibited to charge under water stains
- This product is an electronic product, not as a medical reference, and the measurement data is only reference
FAQ
Why can’t I push call information or content?
- Android 00 WeChat reminder service permission acquisition When the user turns on the 00 WeChat reminder switch for the first time, the APP will obtain the corresponding permission, and check the program in the APP to obtain the corresponding permission.
- When the IOS (incoming call, SMS, 00, WeChat) reminder is turned on or off, the system will automatically pop up a pairing request, and the user only needs to select the pairing. (After the APP is unbound, you need to cancel the pairing in the Bluetooth settings interface of the mobile phone to turn off the information push)
- The message push is consistent with the information in the mobile status bar (if there is no actual content push, please check whether the third-party APP setting of the mobile phone turns off the actual content push)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>