ESTO Ensto-One 3.6kW Charging Station User Guide
- June 6, 2024
- ESTO
Table of Contents
ESTO Ensto-One 3.6kW Charging Station
Introduction
This User Guide is for the Ensto One Charger family. Even if the features and
appearance of the different charger versions varies, the usage of the product
always follow the principles described in this guide. Available features
depend on the charger model.
Ensto collects data from the charging stations connected to the Internet. This
anonymized data may be used to develop new digital services and improve user
experience and Ensto’s offering.
Safety instructions
WARNING: Danger of electric shock! Risk of fire!
- Installation and maintenance must only be done by an electrically skilled person.
- People who are not able to operate according to the instructions must not use this charger.
- Do not use this charger if the charger itself or the charging cable appears to be dam-aged.
- Do not use the domestic socket to charge an electric vehicle.
Intended use
- The charger is intended for charging electric vehicles, both plug-in hybrids and full battery electric vehicles.
- Do not connect to the charger other devices, such as power tools.
- Use the domestic socket only for car heating or household appliances (e.g. vacuum clean-er).
EVH161-A2RMD – Domestic socket
EVH161-A2RMD is provided with a domestic socket.
-
Use the domestic socket only for car heating or household appliances.
Do not use the domestic socket to charge an electric vehicle! -
You can start using the domestic socket without RFID authentification.
-
You can use the domestic socket if:
The charging cable is not connected to the charger.
The timer is set to “ON” position. -
The kWh usage of each domestic socket transaction is forwarded to EV Manager.
Note! If you connect the charging cable to the charger while you use the domestic socket, the transaction ends immediately.
EVH161-A2RMD – Timer
Fixed charging cable
EVH161-ACRM0 and EVH321-ACRM0 are equipped with a fixed charging cable.
User Interfaces
LED indicator lights will show the status of the charger as described below
:
Free Charging
Start charging
When the charger is free and the LED indicator shows green, you can start a
charging event.
Charging with RFID
You need an RFID tag that has permission to access the charger.
**Start Charging with RFID
**
Show the RFID tag to the RFID reading area.
While the RFID tag is read, the LED indicator flashes green and verifies the
user’s permission to charge.
- If the user authorization is rejected, the LED indicator flashes red.
- If the user authorization is accepted, the indicator light turns to waving green.
The charging event starts.
The LED indicator turns to stable blue.
Stop Charging with RFID
Show the RFID tag to the RFID reading area.
The charging event ends.
- The LED indicator turns to waving green.
Unplug the charging cable from the charger (models with a separate charging
cable).
Unplug the charging cable from your electric vehicle.
Ensto Chago Oy
Ensio Miettisen katu 2, P.O. Box 77 FIN-06101 Porvoo, Finland
Tel. +358 204 76 21
ensto.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>