DOMETIC SabreLink150 Awning Lighting system User Manual
- June 6, 2024
- Dometic
Table of Contents
- DOMETIC SabreLink150 Awning Lighting system
- INSTALLATION
- Explanation of symbols
- Safety instructions
- Operating the device safely
- Scope of delivery
- Accessories
- Intended use
- Technical description
- Installing the device
- Using the device
- Storing the device
- Cleaning and maintenance
- Troubleshooting
- Warranty
- Disposal
- Technical data
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
DOMETIC SabreLink150 Awning Lighting system
INSTALLATION
Explanation of symbols
WARNING!
Safety instruction: Indicates a hazardous situation that, if not avoided,
could result in death or serious injury.
CAUTION!
Safety instruction: Indicates a hazardous situation that, if not avoided,
could result in minor or moderate injury.
NOTICE!
Indicates a situation that, if not avoided, can result in property damage.
Safety instructions
General safety
WARNING! Failure to obey these warnings could result in death or serious
injury.
Electrocution hazard
- If this device’s power cable is damaged, the power cable must be replaced by the manufacturer, a service agent or a similarly qualified person in order to prevent safety hazards.
- This device may only be repaired by qualified personnel. Improper repairs can lead to considerable hazards.
- Avoid the power cord, plug, or other electrical parts to get in contact with water or any other liquid.
Health hazard
- This device can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the device in a safe way and understand the hazards involved.
- Children shall not play with the device.
- Cleaning and user maintenance shall not be made by children without supervision.
Operating the device safely
WARNING! Failure to obey these warnings could result in death or serious
injury.
Electrocution hazard
-
Do not operate the device if it is visibly damaged.
-
Do not operate the device if any of the components have been subjected to moisture.
-
Only use accessories that are recommended by the manufacturer.
-
Do not modify or adapt any of the components in any way.
Fire hazard -
When positioning the device, ensure the supply cord is not trapped or damaged.
-
Do not locate multiple portable socket-outlets or portable power supplies at the rear of the device.
Health hazard -
If the flexible wiring connected to this light is within arm’s reach fix it to the wall to reduce the risk of strangulation.
CAUTION! Failure to obey these cautions could result in minor or moderate
injury.
Health hazard
- When positioning the device, ensure that all cables are suitably secured to avoid any form of trip hazard.
NOTICE! Indicates a situation that, if not avoided, can result in property damage.
- Check that the voltage specification on the type plate corresponds to that of the energy supply.
- Ensure that the main power adapter is plugged into an outlet that has a residual current device.
- Never pull the plug out of the socket by the cable.
- Never immerse the device in water.
- Protect the device and cables against heat and moisture.
- The device shall not to be exposed to rain.
Scope of delivery
Starter kit
No . in fi g. 1 , Quanti| ****
ty Description
---|---
1| 1| Remote control
2| 1| Remote receiver
3| 1| LED light
No . in fi g. 1 , Quantity|
Description
---|---
4| 1| 5 m AC cable with power adapter
5| 2| S-hooks
6| 2| Pole clips
3.2
|
Add-on kit
|
No . in fi g. 2 , Quantity|
Description
1| 1| LED light
2| 1| Connection coil
3| 2| S-hooks
4| 2| Pole clips
Accessories
Accessories are not included in the scope of delivery.
No in fig. 1 Description
7 Carry bag
Intended use
The lighting system is suitable for:
-
Interior illumination within tents or awning tents
-
Indoor use only
The lighting system is not suitable for: -
Outdoor use
This product is only suitable for the intended purpose and application in accordance with these instructions. This manual provides information that is necessary for the proper installation and/or operation of the product. Poor installation and/or improper operating or maintenance will result in unsatisfactory performance and a possible failure.
The manufacturer accepts no liability for any injury or damage to the product resulting from: -
Incorrect assembly or connection, including excess voltage
-
Incorrect maintenance or use of spare parts other than original spare parts provided by the manufacturer
-
Alterations to the product without express permission from the manufacturer
-
Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product
specifications.
The radio equipment of the device complies with the requirements of the
directive 2014/53/EU. You can find the Declaration of Conformity of the device
on documents.dometic.com.
Technical description
The lighting system is designed for operation with AC power. Up to three LED
lights can be linked together using one power adapter. The light source of
this light is not replaceable. When the light source reaches its end of life
the whole light shall be replaced.
Control elements
No in fig. 1 Description
1 On/off button
2 + and – buttons
3 Percentage buttons
Installing the device
Starter kit
- Proceed as shown (fig. 5, page 4 – fig. 7, page 4).
Add-on kit
- Proceed as shown (fig. 8, page 5).
Using the device
Before first use
- Remove the plastic tab from the remote control‘s battery.
- Pair the remote control to the remote receiver (fig. 0, page 5).
Switching on and off
- Proceed as shown (fig. 9, page 5).
Dimming the light
- To dim the light continuously, proceed as shown (fig. a, page 5).
- To dim the light in percentage steps, proceed as shown (fig. b, page 5).
Changing the battery of the remote control
WARNING!
Keep batteries away from children.
- Replace the battery with a battery of the same type (3 V CR2025, see fig. 4, page 4).
Storing the device
- Store the device in a clean, dry, and dust-free space.
Cleaning and maintenance
WARNING! Electrocution hazard
Unplug the lighting system from the power supply before cleaning and
maintenance.
NOTICE!
- Never clean the lighting system under running water or in dishwater.
- Do not use sharp or hard objects, abrasive cleaning agents or bleach during cleaning as these can damage the lighting system.
- Occasionally clean the lighting system with a soft, damp cloth.
Troubleshooting
Fault
-
The remote control does not work.
Possible cause -
The plastic tab that isolates the battery has not been removed before first use.
-
The battery of the remote control is empty.
-
The remote receiver is placed within a metal enclosure or another closed-off location and therefore the RF wireless signal is compromised.
-
The remote control is not paired to the remote receiver correctly.
Solution -
Remove the plastic tab.
-
Replace the battery with a battery of the same type (see chapter “Changing the battery of the remote control” on page 12).
-
Place the remote receiver away from any metal enclosure or closed-off locations.
-
Pair the remote control to the remote receiver (see chapter “Before first use” on page 12).
Warranty
The statutory warranty period applies. If the product is defective, please contact your retailer or the manufacturer’s branch in your country (see dometic.com/dealer). For repair and warranty processing, please include the following documents when you send in the product:
- A copy of the receipt with purchasing date
- A reason for the claim or description of the fault
Disposal
Place the packaging material in the appropriate recycling waste bins, wherever
possible. Consult a local recycling center or specialist dealer for details
about how to dispose of the product in accordance with the applicable disposal
regulations.
Protect the environment!
Do not dispose of any batteries with general household waste. Return defective
or used batteries to your retailer or dispose of them at collection points.
Technical data
Further product information can be accessed via QR code on the energy label on the product or via April. etc.Europa. EU.
| SabreLink150
---|---
Connection voltage:| 220 – 240 Vw
12 Vg
Power consumption:| 36 W ± 10 %
Dimensions (W x H x D):| 1210 x 30 x 30 mm
Weight:| 0.93 kg
| Remote control
---|---
Working voltage:| 12 – 24 Vg
Output current:| Peak 6 A
Mode:| RF wireless
Frequency:| 433.92 MHz
Distance:| > 30 m in open
area
Conformity:|
© 2021 Dometic Group. The visual appearance of the contents of this manual is protected by copyright and design law. The underlying technical design and the products contained herein may be protected by design, patent or be patent pending. The trademarks mentioned in this manual belong to Dometic Sweden AB. All rights are reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>