HAO XUN HX200Q4 High Capacity Portable Power Source Instruction Manual
- June 6, 2024
- HAO XUN
Table of Contents
Operation Instruction for Portable Power Source
Please read this operation instruction before using the product.
Product Ports
Product Features
Safety: With multiple protection designs, several abnormal conditions
such as overcharge, over-discharge, high temperature, and short circuit can be
easily handled no matter in charging, discharging, or standby state to provide
reliable guarantee for your mobile phone and digital device.
Efficiency: With quick charging and discharging efficiency, supporting
quick charging and discharging, Multi-protocol intelligent output.
Compatibility: embedded with intelligent USB charge controller,
compatible with mainstream mobile phone and digital device, supporting main
stream quick charging and discharging device.
Quality: Choose high-quality lithium polymer batteries and customize
charge and discharge management chips.
Product Introduction
Thank you for your selection. This product is a type of high-capacity portable power source with high quality Li-polymer electric core and customized charging and discharging electric chip, which performs well in safety, efficiency and compatibility, etc.
Basic parameters
Product model: HX200Q4
Battery type: Li-polymer electric core
Input parameter: Type-C–5V/3A,9V/2A Micro–5V/2.1A
Output parameter: Type-C–5V/3A,12V/1.67A,9V/2.77A(Max) 2USB
QC–5V/3A,9V/2A,12V/1.5A,4.5V/5A(Max) 1USB–5V/2.1A
Wireless charging output： 15W(Max）
Dimension:~27.5×7 8.6×1 60.2mm
Usage temperature: 0℃~45℃
Product Operation
Power Indicator Switch
After the product stops working, the LED light will automatically turn off in about 32 seconds. To view the current remaining power of the product, you can tap the switch to re-light the LED light to view the current remaining power of the product, gently and continuously press twice: stop charging.
Charging
Charge the product with a brand power adapter connection. LED light shows current battery charge while charging
| Indicator light | capacity |
|---|---|
| 0～25% | 25～50% |
| LEDI | flicker |
| LED2 | |
| LED3 | |
| LED4 |
Solar charging
Please put the solar charging board on the front,Let the solar charging board fully receive the amount of solar energy and charge it.the corresponding relation between the displayed status and electric quantity is as follows:
| Indicator light | capacity |
|---|---|
| 0～25% | 25～50% |
| LED I | flicker |
| LED2 | |
| LED3 | |
| LED4 |
Output
This product uses a smart identification charging design. When the digital
product is connected with a USB power cable, the digital product can be
intelligently and automatically recognized, and the charging function can be
activated. LED light shows current battery charge during charging
Wireless charging function: align the position of the receiver of the digital
product supporting wireless charging with the position of the wireless
charging indicator of the mobile power supply, and start the charging
function（LED1 red light is on when the wireless charging is abnormal or there
is a foreign object）. During the charging process, the LED indicator shows the
current battery level.
capacity
Indicator light|
---|---
low battery| 0～25%| 25～50%| 50～75%| 75～100%
LED 1| flicker| bright| bright| bright| bright
LED2| | | bright| bright| bright
LED3| | | | bright| bright
LED4| | | | | bright
Notice
- Please fully charge this product before first usage.
- During the usage of this product, please lighten the screen of digital product and confirm that the charging connection label is correctly displayed to ensure that the product is in normal working condition.
- During the charging for this product or charging for digital product with this product, please select adaptive connecting line by yourself.
- If the LED light of this product goes out during the charging process of the digital product, it means that the battery of the product is low, please charge it immediately.
- During the wireless charging of the digital product, the red light of LED1 is on to indicate abnormal charging (foreign objects). Check whether the position of the receiver of the digital product corresponds to the position indicated by the mobile power wireless charging and whether there are other metal objects.
- During the connection between the digital product and this product, the digital product has priority to use the electric quantity of this product.
- When the digital product is fully charged, please take out the connecting line in time to avoid loss.
- If the product enters into protection status due to output short circuit or other reasons (LED has no display after pressing buttons), it can be recovered by charging activation via external charger.
Warning
Since this product contains Li-ion electric core, it’s forbidden to dismantle
the product shell arbitrarily to avoid possible damage to electric core or
other dangers. It’s forbidden to arbitrarily dismantle, squeeze, puncture this
product or put it in short circuit, water, fire or exposed to an environment
with a temperature higher than 60℃ (140℉).
FCC Statement
This device complies with Part 18 of the FCC Rules. Operation is subject to
the following two conditions: (1)This device may not cause harmful
interference. 2)This device must accept any interference received, including
interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 18 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.if this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on,the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an autlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
IMPORTANT NOTE:
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. The device has been evaluated to meet general RF
exposure requirement. The device can be used in portable exposure condition
without restriction. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>