BUSH MEB155177 Integrated Tall Fridge Built – In Larder User Manual

June 6, 2024
BUSH

Customer
Service Manual
Larder Fridge ME13155177
MEBI55177F BUSH MEB155177 Integrated Tall Fridge Built In
Larder

Customer service manual
Integrated Tall Fridge, Built – In Larder

Precautions:
Always follow safety advice.
Always switch off and unplug the appliance before attempting to remove any part.
Always wear appropriate protective equipment when carrying out any work.
Always use the correct tools for carrying out any work.
Some repairs may not be suitable for unqualified users to carry out. If in doubt seek the advice of a professional repairer.

SAFETY PRECAUTIONS

Read all instructions before replacing the product
Before any disassembly makes sue appliance is unplugged
There Is an electrical shock risk
Use rated control equipment
DO NOT attempt a product repair f you have any doubts as to your ability to complete the repair in a safe and satisfactory manner
Make sure to check out Model name. Rated voltage.
Rated curter* Operation Terry etc When you replace the pans. please use authentic parts to replace defective parts Before starting the des/mantling, wear protective equipment Do not use multiple receptacles or extension cad
Do riot plug In damaged. torn or old plugs
Do not aloes children to play with the appliance or let them hang off the door
Do not plug in or out the plug from the receptacle with wet hands to prevent electrocution
Do not place glass bottles or beverage cans in the freezer department Bottles or cans may explode
When taking ice made in the freezer department, do not touch. Ice may cause ice bins and/or cuts
Do not cover the body or top of the fridge with lace This affects the performance of your fridge
Fox the accessories in the fridge Owing transportation to prevent damage to accessories
Leave to stand for at least before switching on to allow compressor of to settle if transported horizontally
Do not damage the refrigerant circuit
Care must be taken Male cleaning/carrying the appliance not to touch the bottom of the condenser metal votes at the back of the appliance, as this could cause injury to fingers and hands

REPLACEMENT PROCEDURE Applicable models EN
Part name Glass Shelf Change General

First, gently lift the front side of the glass up. Then you can pull the glass out by directly pulling towards yourself.

BUSH MEB155177 Integrated Tall Fridge Built In Larder -
fig1

REPLACEMENT PROCEDURE Applicable models EN
Part name Foldable Glass Shelf Change General

First, push the glass in front to all the way back. Then gently lift both glasses up together. Now you can pull glasses out by directly pulling towards yourself.

BUSH MEB155177 Integrated Tall Fridge Built In Larder -
fig2

REPLACEMENT PROCEDURE Applicable models EN
Part name Flap Cover Change General

First open the flap slightly, now push the flap up from its bottom edge, focusing on only one side. When the flap is freed from this side, repeat the same operation for the other side.

BUSH MEB155177 Integrated Tall Fridge Built In Larder -
fig3

REPLACEMENT PROCEDURE Applicable models EN
Part name Door Shelf Change General

Gently pull the shelf up using both hands, without bending or twisting the shelf. When the shelf is free from assembly on right and left sides, you can take the shelf out by pulling towards yourself.

BUSH MEB155177 Integrated Tall Fridge Built In Larder -
fig4

REPLACEMENT PROCEDURE Applicable models EN
Part name Adjustable Door Shelf Change General

First grip the door shelf with both hands, at the same time using your thumbs, pull latches on sides towards yourself. This will unlock the mechanism, so you can lift the shelf all the way up and free the shelf from its guides on the door.

BUSH MEB155177 Integrated Tall Fridge Built In Larder -
fig5

REPLACEMENT PROCEDURE Applicable models EN
Part name Basket, Chiller, Crisper Change General

First, pull the basket out until it reaches the end position. Then, gently pull the front side up until frees from its guides on the sides. Finally, continue pulling it out and remove it from the place.

BUSH MEB155177 Integrated Tall Fridge Built In Larder -
fig6

REPLACEMENT PROCEDURE Applicable models EN
Part name Maxifresh Change General

BUSH MEB155177 Integrated Tall Fridge Built In Larder -
fig7

REPLACEMENT PROCEDURE Applicable models EN
Part name Door Gasket Change General

Pull the gasket towards starting from the top right corner. Slowly pull the rest of the gasket. Completely remove the gasket from the door.

BUSH MEB155177 Integrated Tall Fridge Built In Larder -
fig8

Check the replacement gasket from starting with the upper right corner, press on the gasket until it fits to its place. Place the other sides of the gasket with the help of your thumb

BUSH MEB155177 Integrated Tall Fridge Built In Larder -
fig9

After the replacement check if there are any nonfitting points on the gasket. Also, check if there is any opening at the gasket while the door is closed. If so that might cause condensation/icing or insufficient cooling/freezing. To prevent this soften the form of the gasket with the help of a hair dryer or hot water and make sure that all points are closing perfectly.

ADDITIONAL SUPPORT Applicable models EN

General

The following parts are available for the customer to undertake repairs at their own risk.
Please carefully follow the guidance given in this manual including all safety measures.

  • Door Handles
  • Door Hinges
  • Trays
  • Baskets
  • Door Gaskets

Parts can be obtained by calling the support service listed in this section. All repairs in this manual can be achieved using commonly available tools.
If you are in any doubt of your ability to carry out a repair, please use a professional repairer, also available through the support service.
Damage sustained to the appliance or future faults arising from poorly carried out repairs will not be covered under warranty.

Help and assistance

If you require any technical guidance or find that your fridge is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions or online at www.bush- support.com

If you still require further assistance, call one of our experts on 0345 257 7271*. To help us give you a fast and efficient service please have the following information ready.

**Local call rates apply***

Lines open 8 am-7 pm Monday to Saturday and 10 am-4 pm Sunday.
*Calls to Bush inquiry lines may attract a charge and set up fee residential lines depending on your call plan/tariff. Mobile and other providers’ costs may vary, see  www.bt.com/pricing for details
For security and training purposes, telephone calls to and from customer service centers may be recorded and monitored. Calls from the Republic of Ireland will attract international call charges

Notes on disposal :
The symbol on the product or its packaging indicates that this product may not be treated as household waste. Instead, it should be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling this product, please contact your local council office, your household waste disposal service, or the shop where the product was purchased.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals