ENS SECURITY POE-INJECT03 4+2 Post Ai PoE Switch Installation Guide

: June 6, 2024
: ENS SECURITY

Table of Contents

ENS SECURITY POE-INJECT03 4+2 Post Ai PoE Switch
Installation
FAQ
LED
Specification
Warranty Card
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ENS SECURITY POE-INJECT03 4+2 Post Ai PoE Switch

ENS-SECURITY-POE-INJECT03 4+2-Post-Ai-PoE-Switch

Installation

ENS-SECURITY-POE-INJECT03 4+2-Post-Ai-PoE-Switch-1

FAQ

Q1. Can the gigabit PoE Injector supply power to a PoE device which PoE port is megabit?
A: Yes. Both LAN and PoE ports comply with IEEE 802.3, IEEE 802.3u and IEEE 802.3ab standards and support 10/100/1000Mbps Auto-Negotiation.
Q2. What can I do if my PoE Injector doesn’t supply power to the powered device or the supplied power is unstable?
A1: Make sure the PD is PoE-compatible and connect its PoE port to the injector’s PoE port. A2: Please check if the power consumption of the PD is over power budget of injector, if the
PD is 48V PoE compatible or not. A3: The quality and length of the Ethernet cable are also important factors.

LED

For POE-INJECT03 Red: Not power suppy for PD. Green: Power supply for PD.

Specification

WI-POE55 Specification

Interface| 2 10/100/1000Mbps Rj45 ports with 1 PoE port

Network Media

| 10Base-T: UTP CAT 3,4,5(Max 100m) EIA/TIA-568 100Ω STP (Max 100m) 100BASE- TX: UTP CAT 5, 5e cable

(Max 100m)

EIA/TIA-568 100Ω STP (Max 100m)

1000BASE-T: UTP category 5, 5e, 6

cable (Max 100m)

PoE PIN| 1,2+ 3,6-
PoE Budget| 52V 60W
LED Indicator| PWR
Dimensions

(WDH)

| 1225839mm
Backbound

Bandwidth

| 2000Mbps
Environment| Operating Temperature:

-10°C~55°C

Warranty Card

Username|
---|---
Address|
Telephone No.|
Purchase Shop|
Purchase Address|
Product Model No.|
Purchase Time|
Serial No.|
Dealer Signature|

If the product defects within three months after purchase, we will provide you a new product of the same model.
If the product defects within the three-year warranty period, we will provide the professional maintenance service.
Proof of purchase and a complete product serial number are required to receive any services guaranteed as part of the limited warranty.
Any other defects that are not caused by workmanship or product quality, such as natural disaster, water damage, extreme thermal or environmental conditions. sticker damaged, warranty card losing will disqualify the product from limited warranty.