EntryLogic M5 Tablet Computer User Guide

EntryLogic M5 Tablet Computer User Guide

Quickstart Guide

WelcometoEntryLogicand congratulationsontakingthefirststep in providingyourvisitorsand employees thesafetyand efficiency of a visitor management system.

This box contains the following:

M5 Tablet Compuuter

Support

If youaremissing anyitems, contactcustomersupport. Customer support is available Monday through Friday, 8:00 AM to 5:00 PM. Youcan reach usbyemailingusat support@entrylog ic.comor chat online at: www.entrylogic.com
PLEASE NOTE: Your tablet has a protective screen to prevent damage from occurring during shippi ng. You can remove the protective sheet by peeling from the edge of the screen.

Set-up

1. Note: Useof theEntryLogicapplicationrequiresasubscription. Toactivateyouraccount, pleasevisit:ww.q.entrylogic.comto select a plan or chat with us live

2. Power the unit on.

3. Connect EL-DP-30A to the Internet via WiFi or LAN. Settings -> I letwork II Internet -> WiFi -> select desirecl SSID and enter password

4. Pair optional peripheral devices via BT. Settings -> Connected devices -> Bluetooth -> Pair new device (and refer to your BT device for pairing instructions)

Polls

1. Power Port: Connect the AC Power Adapter to this port. Then, plug the AC Power Adapter into a grounded AC power outlet.
2. Hot in use.
3. USB Ports: Either one of these ports can be used for connecting the IDcardscanner (notincluded)ortheThermalBadgePrinter (not included)
4. LAII Port: This device can also be connected to your network. Toestabli sh a connection, plus an ethernetcable into the LAII Port on the device that is connected to the internet, such as a modem and/or router.

Warnings

Do not disassemble oralteryourdevicein any way, alit mayresultinanelecuicalshcrt, smoke, fire,electrical shock, injwytoyourself cc others,damagetothe tabletorceher property. rot sertice or repair, please contact Entrytogies customersupport f or assistance. Do notplace the prcduct nearchernicalsorin a placewhere chemical spillagecan occur. Donotallow organic sthene,suchasbemene, thinner, ordececrizersormingintoccntact with the screen oroutercase of the device. These maycausethe case towarp ordiscolor and may also cause the device to malt Lexdon. Do not allow vater,drinks,ormetal objectscorneinto antactwith AC Poweradapter. In addibm,6anot use theAC oowerAdapterinanareawhereitmaygetwet,asafireorelectrical shock maycccur.
Ponce insertanyforeigncbjeaimo theterminalsof thedevice orAC Poweradapter, as damage, buns, or elecnical shock may occur.
For a list of additional precautions, please visit: www.entrylogic.com/support.

Specifications & Compliance

FCC and ISED Canada Compliance: This equipment has been tested and is in compliance with Part 15 of the FCC Rules and ISED Canada license-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) thisdevicemustacceptany interference received, including interference that may cause undesiredoperation.
The AC PowerAdapter has been tested and in compliance with the safetystandards setforth by Part 1: Safety Requirements in both the US [UL 62368-1:2014 Ed.2] and Canada [CSA C22.2#62369-1:2014 Ed.2].
In accordance to local laws, when the device reaches end of life, it should be recycled in a manner that protects human health and the environment. Please consult your local authorities for local laws and regulations.

Resources1

Warranty: This product comes with a limited warranty. To view full warranty terms and conditions, please visit: www.entrylogic.com/warranty
For safety and compatibility reasons, we recommend using only the EntryLogic AC Power Adapter (EL-PA30). Replacement AC Power Adapters can be purchased by visiting: www.entrylogic.com

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– – Reorient or relocate the receiving antenna.
– – Increase the separation between the equipment and receiver.
– – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– – Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Statement To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 5mm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Read More About This Manual & Download PDF:

References

• Telepathy - Powering Successful Brands
• ntrylogic.com
• rylogic.com
• rylogic.com/warrant

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>