EntryLogic EL-DP30-A Tablet Computer User Guide
- June 6, 2024
- EntryLogic
Table of Contents
EntryLogic EL-DP30-A Tablet Computer
Welcome to EntryLogic and congratulations on taking the first step in providing your visitors and employees the safety and efficiency of a visitor management system.
This box contains the following:
- EL-DP30-A Tablet Computer
- AC Power Adapter
Support
If you are missing any items, contact customer support. Customer support is available Monday through Friday, 8:00 AM to 5:00 PM. You can reach us by emailing us at support@entrylogic.com or chat online at: www.entrylogic.com
PLEASE NOTE: Your tablet has a protective screen to prevent damage from occurring during shipping. You can remove the protective sheet by peeling from the edge of the screen.
Ports
-
Power Port: Connect the AC Power Adapter to this port. Then, plug the AC Power Adapter into a grounded AC power outlet.
-
Not in use.
-
USB Ports: Either one of these ports can be used for connecting the ID card scanner (not included) or the Thermal Badge Printer (not included)
-
LAN Port: This device can also be connected to your network. To establish a connection, plus an ethernet cable into the LAN Port on the device that is connected to the internet, such as a modem and/or router.
Set-up
-
Note: The use of the EntryLogic application requires a subscription. To activate your account, please visit: www.entrylogic.com to select a plan or chat with us live
-
Power the unit on.
-
Connect EL-DP-30A to the internet via WiFi or LAN. Settings -> Network & Internet -> WiFi -> select desired SSID and enter password
-
Pair optional peripheral devices via BT. Settings -> Connected devices -> Bluetooth -> Pair new device (and refer to your BT device for pairing instructions)
Warnings
-
Do not disassemble or alter your device in any way, as it may result in an electrical short, smoke, fire, electrical shock, injury to yourself or others, damage to the tablet or other property. For service or repair, please contact EntryLogic’s customer support for assistance.
-
Do not place the product near chemicals or in a place where chemical spillage can occur.
-
Do not allow organic solvents, suchas benzene, thinner, or deodorizers coming into contact with the screen or outer case of the device. These may cause the case to warp or discolor
and may also cause the device to malfunction. -
Do not allow water, drinks, or metal objects come into contact with AC Power Adapter. In addition, do not use the AC Power Adapter in an area where it may get wet, as a fire or electrical shock may occur.
-
Do not insert any foreign object into the terminals of the device or AC Power Adapter, as damage, burns, or electrical shock may occur. For a list of additional precautions, please visit: www.entrylogic.com/support
Resources
Warranty : This product comes with a limited warranty. To view full
warranty terms and conditions, please visit:
www.entrylogic.com/warranty
For safety and compatibility reasons, we recommend using only the EntryLogic
AC Power Adapter (EL-PA30). Replacement AC Power Adapters can be purchased by
visiting: www.entrylogic.com
Specifications & Compliance
FCC and ISED Canada Compliance: This equipment has been tested and is in
compliance with Part 15 of the FCC Rules and ISED Canada license-exempt RSS
standard(s). Operation
is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC ID: 2AH6G-ELDP30A
IC: 26745-ELDP30A
The AC Power Adapter has been tested and in compliance with the safety
standards set forth by Part 1: Safety Requirements in both the US [UL
62368-1:2014 Ed.2] and Canada
[CSA C22.2#62369-1:2014 Ed.2]. In accordance to local laws, when the device
reaches end of life, it should be recycled in a manner that protects human
health and the environment. Please consult your local authorities for local
laws and regulations.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum distance of 5mm the radiator
your body. This device and its antenna(s) must not be co-located or operation
in conjunction with any other antenna or transmitter.