JBL Tune 125BT Headphones User Guide
- June 6, 2024
- JBL
Table of Contents
JBL Tune 125BT Headphones
WHAT’S IN THE BOX
how to wear
power on & connect
BUTTON COMMAND
MULTI-POINT CONNECTION
- To switch music source, pause the music on the current device and select play on the 2nd device.
- Phone call will always take priority.
- If one device goes out of bluetooth range or powers off, you may need to manually reconnect the remaining device.
- SELECT “forget this device” on your bluetooth devices to disconnect multi-point.
Charging
Led behaviors
TECH SPEC
Model: TUNE125BT
Driver Size: 8.6 mm / 0.34” Dynamic driver
Power supply: 5 V 1 A
Weight: 18.3 g / 0.04 lbs
Headset battery type: Lithium-ion battery (3.7 V / 130 mAh)
Charging time: < 2 hrs
Music playtime with BT on: up to 16 hrs
Frequency response: 20 Hz – 20 kHz
Impedance: 16 ohm
Sensitivity: 95 dB SPL @1kHz 1mw
Microphone sensitivity: -29 dBV/Pa @1kHz
Bluetooth version: 5.0
Bluetooth profile version: HFP 1.7, A2DP 1.3, AVRCP 1.6
Bluetooth transmitter frequency range: 2.4 GHz- 2.4835 GHz
Bluetooth transmitted power: < 6 dBm
Bluetooth transmitted modulation: GFSK, /4 DQPSK, 8DPSK
Maximum operation temperature: 45 °C
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by HARMAN International
Industries, Incorporated is under
license. Other trademarks and trade names are those of their respective
owners.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>