Yeastar DS7310 Room Display Installation Guide
- June 6, 2024
- Yeastar
Table of Contents
Yeastar DS7310 Room Display
Package Contents
Please make sure all of the following are present when you unpack the product
package.
Features
- RK3288, Quad-core Cortex A17
- Resolution: 1280*800, 10.1″ LCD panel
- 5.0M/P, front camera
- RAM 2GB
- Internal memory 16GB
- Android 8.1
- Point capacitive touch
- Wi-Fi 802.11 b/g/n
- RJ45 Ethernet with PoE
- USB 2.0
- VESA: 75*75mm
Exterior Components
| No. | Function | No. | Function |
|---|---|---|---|
| 1 | Camera | 5 | Micro USB OTG |
| 2 | USB 2.0 | 6 | DC in power supply port |
| 3 | Recovery | 7 | VESA 75*75mm |
| 4 | LAN port: RJ45 with PoE | 8 | Power button |
Installation Instructions for Wall Mounting
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body
Declaration of Conformity
Yeastar Room Display is in conformity with the essential requirements and
other relevant provisions of the CE and FCC.
Technical Support
For assistance, please contact Yeastar Technical Support.
support.yeastar.com
+86 592-550-3301
References
- PBX, Unified Communications, Workplace Management | Yeastar
- PBX, Unified Communications, Workplace Management | Yeastar
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>