Pro-Ject 497990 Juke Box E HiFi Set red User Guide

: June 6, 2024
: Pro-Ject

Table of Contents

Getting started
User Instruction
Service
Warranty
Commercial Use
Need help?
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Pro-Ject 497990 Juke Box E HiFi Set red User Guide

Getting started

Make sure to have enough space to unpack your turntable.
Always unpack and set up in a clean environment.
Please Do NOT throw away the packaging! If you need service or want to return your product, please send it in the original packaging including all inserts. In case of damage due to alternative packaging your dealer cannot guarantee a full refund.
complete manual:
www.project-audio.com/en/product/juke-box-e

Package Content

Unpack all items from accessory bag:

Package content

a) Stylus pressure gauge
b) Batteries for remote control
c) Drive Belt
d) Fabric gloves
e) Adapter for 7“singles / allen key
f) Bluetooth antenna
g) Power cable
h) Remote control

User Instruction

Remove dust cover carton from the box.
Remove the turntable protection insert.
Lift the wrapped turntable out of the box.
Unpack the power supply
Carefully remove the protection covering.
Remove the platter protection.
Put the drive belt on the pulley and platter.
Install the Bluetooth antenna.
Unpack the dust cover and put it on.
Plug in the power supply and connect the turntable with your speakers.
Turn on the Juke Box with the buttons on the bottom.
Control of the unit using the knob on the front

Standby
Press the knob for 3 seconds to turn the unit on.
Input selector
Briefly press the knob to switch between Bluetooth > Turntable > Line In
Volume
Adjust volume by turning the knob.

Remove tonearm twist tie.
Remove the needle protection cover.
Move the tonearm up/down with the lever.
Put a record on and have fun with music.

Service

Should you encounter a problem which you are not able to alleviate or identify despite the above information, please contact your dealer for further advice. Only when the problem cannot be resolved there should the unit be sent to the responsible distributor in your country.
Warranty repairs will only be affected if the unit is returned correctly packaged. For this reason we recommend keeping the original packaging.
Never return a record player without making sure that is it safely disassembled and correctly packaged in the original packaging according to the diagrams on the last page of this user guide. Please remove these parts and pack them separately: lid, counterweight, anti-skating weight and belt.
Fit the cartridge protection cap and the transport lock for the tonearm tube, prior to carefully packaging the record player.

Warranty

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions for use and/or by transportation without the original packaging. Modification or change to any part of the product by unauthorized persons, release the manufacturer from any liability over and above the lawful rights of the customer.

Warranty: Terms and Conditions

A warranty is valid only for products purchased from an authorized Pro-Ject Audio Systems retailer or dealer.
This warranty offer is limited to the repair of the equipment (which could be a repair or replacement at our discretion, neither of which affects your original warranty).
Neither transportation or any other costs, nor any risk for removal, transportation and installation of products is covered by this warranty.
A warranty is only valid for the original owner. It is not transferable.
To validate your warranty, you will need to provide the original sales invoice or other proof of ownership and date of purchase.
Warranty must be claimed within two years of purchase from an authorized dealer. After this period of time, the warranty will expire.
The legal warranty obligation exists in addition to this warranty and is not limited by this warranty.

A Pro-Ject Audio Systems warranty relates to claims of defects in materials and/or workmanship at the time of purchase. It does not cover:

Deterioration of component parts, the nature of which is to become worn or depleted with use, such as batteries and headphone ear pads, drive belts and cartridges.
Damages caused by incorrect installation, connection or packing.
Damages caused by any use other than the correct use described in the user manual, negligence, modifications, or use of parts that are not made or authorized by Pro-Ject Audio Systems.
Damages caused by faulty or unsuitable ancillary equipment.
Damages caused by accidents, lightning, water, fire heat, war, public disturbances or any other cause beyond the reasonable control of Pro-Ject Audio Systems and its appointed distributors.
Products where the serial number has been altered, deleted, removed or made illegible.
Repairs or modifications that have been executed by an unauthorized person.

Commercial Use

Faults caused due to using domestic products in commercial environments or on commercial scales are not covered by warranty. This turntable is intended for domestic use only. Using them for business applications are done so at your own risk.

Pro-Ject Audio Systems is a Registered Trademark of H. Lichtenegger.

The information, pictures and figures were correct at the time of going to press.

The manufacturer reserves the right to make changes to the technical specification without prior notice as deemed necessary to uphold the ongoing process of technical development.