faytech FT101N4200ITCAPOB 10.1 Inch Industrial Tablet IP65 User Guide

: June 4, 2024
: faytech

Table of Contents

Peripherals
Drawing
Revision History
Included Accessories
Optional Accessories
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

faytech FT101N4200ITCAPOB 10.1 Inch Industrial Tablet IP65 User Guide

Intel® Pentium® N4200 QuadCore CPU
6GB RAM memory, 128GB eMMC storage
Pre-installed Win 10 OS (without license – purchase separately)
Rechargeable lithium battery, 7.4V/7000mAh (8.6+ hours operation) (v2)
Kastus® 24/7 anti-viral & anti-bacterial coating
Anti-glare surface treatment (chemical etching)
1000 cd/m² brightness (suitable for outdoor use) (v2)
10-Finger-multi touch capacitive touch panel
1.8mm cover glass with 7H surface hardness (IK08) (v2)
Optically bonded touch panel to LCD panel
Complete IP65 water- and dust proof
Integrated W-LAN & Bluetooth 5.2
Built-in front & back camera and microphone
Integrated barcode scanner & fingerprint scanner
2 year guarantee (24/7 usage)

faytech’s industrial (ruggedized) tablet is the perfect touch solution to be used as a hand-held device (or mounted pc) while performing tasks on the industrial floor or in rough environments. It is completely IP65 water- and dust proof, has a 10-finger capacitive multi touch panel and 24/7 anti-viral & anti-bacterial coating by Kastus®, with a kill rate of >99% against surface bacteria, traditional viruses, and human coronavirus (3-in-1 protection).

The rechargeable lithium battery will easily get you through your workday when needed, especially in an indoor or semi-indoor environment such as a factory floor or office. The battery lifetime depends on the brightness and active usage (it can last up to 8.6 hours of operation, without any stand-by mode).

The tablet has an optically bonded touch panel, which will improve the stability, reduce the reflection, increase the viewing angle, and enhance the perceived brightness. It also provides resistance to dust particles and shows a better image in general.

The device is powered by faytech’s industrial Apollo Lake mainboard. It is driven by the powerful Intel® Pentium® N4200 QuadCore processor with up to 2.50 GHz clock frequency. It is equipped with 6GB RAM and 128G eMMC storage.

Due to its robust design, the tablet is particularly suitable for use in harsh environments such as industrial, rough and outdoor areas. Besides the mobile solution, the device can also be used as a permanently installed control panel. Windows 10 is pre-installed on the device but no license is included, this can be purchased separately (available under accessories).

Legend / Notes

Applicable to version 1| (v1)
Applicable to version 2| (v2)
Applicable to all Versions| None
Product name| 10.1″ Industrial Tablet IP65 N4200
---|---
Model number / EAN number| FT101N4200ITCAPOB / 6920734000388
Global Article Code| European Article Code| Release date (D/M/Y)| Version| Global Article Code| European Article Code| Release date (D/M/Y)| Version
3030508833| 1010502264| 01/09/2021| v1| | | |
3030511187| 1010502433| 01/05/2022| v2| | | |
| | | | | | |

IP Rating
IP65

LCD Panel

Screen diagonal (Inch/cm)| 10.1/25.65
Display active screen size (cm)| 21.70×13.60
Aspect ratio| 16:10
Physical resolution| 1920×1200
External Maximum showable resolution – Micro HDMI| 1920×1200
Colours displayed| 16.7M
Brightness (cd/m2) – after incl. touch panel & optical bonding| 1000 (v2)
Contrast| 800:1
Typical reaction time Tr / Tf (ms)| 25 / 25
Visual Angle horizontal / vertical (°)| 178 / 178
Backlight / Backlight Lifetime (hours)| LED / 50,000
Operation / Mechanical

Operating Temperature (°C)| 0 ~ +45
Humidity Range (RH)| 10% – 90%
Net weight (kg)| 1.20
Gross weight (kg)| 1.70 (incl. cartonage)
Housing material| Plastic Case, Silicone Rubber Frame
Housing (mm) L × W × H| 280.3 × 198.3 × 36.0 (v2)
Mounting| VESA 75 (v2)
4x M3.5 screw thread
Included in the Delivery

Power Supply (see Power section)| Short Installation Manual
Light Docking Station (v2)| Plastic Screen Protector
VESA 75 back plate (attached to tablet) (v2)| Standard battery (inside)
PC System

Wi-Fi 802.11ax (see Wi-Fi specifications)

Bluetooth| Bluetooth 5.2 (high speed data transfer)
Microphone| Integrated (behind cover glass)
Preinstalled OS| Windows 10 IoT LTSC 2019 Entry (without license, purchase separately)
Touch Panel

Touch Technology| Projected Capacitive 10-Point Multitouch
Touch Connector| USB
Touch Life (Contacts)| Unlimited
Surface Hardness| 7H
Surface Treatment| Anti-glare (chemical etching)
Glass Strengthening| Chemically Strengthened
Additional Coating| Kastus® 24/7 Antimicrobial Coating (3-in-1)
Touch Firmware| Included| Works with fingers, gloves & in rainy conditions
Download from website| Works with capacitive touch stylus
Power

Power Indicator| Green / Red LED
Built-in Battery| Rechargeable Lithium Battery, 7.4V/7000mAh (v2)
Power Supply| 100-240V ACDC active switching; 12V DC-Out
Working Power (V)| 12
Power Consumption

/ Active Working Time (w/o stand-by mode)

| 25% brightness, idle mode (indoor / semi-indoor)| 6W / 8.6 hours minimum (v2)
50% brightness, 50% full usage (semi-indoor)| 10W / 5.2 hours minimum (v2)
100% brightness, 100% full usage (outdoor)| 15.5W / 3.3 hours minimum (v2)
Stand-By Consumption (W)| <1
External Connectors

1x 12V DC-In (to recharge)| 1x Micro HDMI 1.4 (class type D)
1x USB 3.0| 1x USB 2.0
1x Micro USB 2.0| 1x Headphone port – Ear out only (3.5mm)
1x 10/100/1000Mbit RJ45 Port| 1x COM port DSUB9 (RS232)
1x Micro SD card slot (TF – TransFlash)

Overview

Peripherals

Wi-Fi & Bluetooth Specifications (AX200) (v2)

Product Name| Intel® Wi-Fi 6 AX200 Module
Wi-Fi| High-performance, low-power, dual-band Pre-Standard-802.11ax Dual Band 2×2
Band Channels| 2.4GHz and 5GHz (2-160 MHz channels)
Wi-Fi Alliance certifications| 802.11a/b/g/n/ac/ax(PreStandard), WPA/2 Personal and enterprise, WPS2, PMF, WMM, WMM-PS, WFD, Miracast, Passpoint R2, Voice Personal
Performance| TX Burst, TCP packet reordering, MSIx for reduced multi-core CPU load upto MCS11
Wi-Fi-Bluetooth Coex| MIMO TX/TX and Rx/Rx Concurrency
Bluetooth| Bluetooth 5.2
Fingerprint Scanner Specifications (MB-X4)

Purpose| Register & unlock device (Windows 10)
Pixels / resolution| 88×88px / 508 DPI
Storage capacity| 100 unique prints (multiple fingers & accounts)
Unlocking time| <1s
FRR / FAR| <2% / <0.002%
Communication interface / UART| SPI / 57600
Additional features| build-in “Smart Learning” algorithm, allowing fingerprint matching to be faster over time
Accepts 360° (degrees) fingerprint matching
OPTIONAL (not included in standard version) | GPS Specifications (UB-118)

Product Name| UB-118
Chipset| High performance BD2/GPS chipset
Frequency| GPS L1 1575.42 MHz / BD B11561.098MHz
Power Consumption| 100mW
TTFF (Time to first fix)| Hot start: 1s| Cold start: 32s
Accuracy (position)| Autonomous <2.5m RMS| DGNSS <1m RMS
Accuracy (velocity)| GPS(+BDS) 0.1m/s RMS| BDS 0.2m/s RMS
Accuracy (time)| 100ns
Sensitivity (acquisition)| BDS -145dBm| GPS -147dBm
Sensitivity (tracking)| BDS -160dBm| GPS -162dBm
Protocol| NMEA 0183 (compatible with BDS)
Maximum altitude| < 50,000 meter
Maximum velocity| < 500 m/s
Maximum acceleration| < 4G
Barcode Scanner Specifications (N4680) (v2)

Product Name| Honeywell N4680 Decoded 2D Scan Engine
Sensor| 640×480 CMOS, 60 frames per second
Illumination Wavelength| Warm white lED with CCT 3000K
Aiming Wavelength| 630nm Red LED
Scan Angle| Roll: 360°, Pitch: ±50°, Skew: ±50°
Field of View| Horizontal ±20°, Vertical ±15°
Motion Tolerance| 6 m/s
Maximum image capture rate| 120 frames per second
Supported Symbologies| 1D, 2D barcodes, OCR, Poorly printed & on-screen bar codes
Typical Depth of Field| C39| 36mm – 747mm (5-10-20 mils)
100% UPC-A| 46mm – 390mm (13 mils)
C128| 33mm – 598mm (5-10-20 mils)
PDF417| 42mm – 490mm (7-10-20 mils)
QR-Code| 40mm – 367mm (7-20 mils)
Data Matrix| 40mm – 182mm (10 mils)
Camera Specifications (front & back) (v2)

YUV422/420, YCbCr422, and compression

Peripherals

Drawing

Capacitive Touch Stylus & Holder not included in standard version (for reference only)

Revision History

Version:	Changes:
v2	Increased the brightness from ‘500+ cd/m2

‘ to ‘1000 cd/m2
‘
Increased the lithium battery size from ‘6000mAh’ to ‘7000mAh’
Added ‘Light Docking Station’ and included ‘VESA 75 back plate’ as standard
Increased the cover glass thickness from ‘1.1mm’ to ‘1.8mm’, for more impact resistance
Updated the silicone rubber frame design, to increase the ruggedness of the tablet
Updated the barcode scanner from ‘LV 3296 OEM’ to ‘Honeywell N4680’ scan engine
Updated the Wi-Fi & Bluetooth module from ‘6221-PUC’ to ‘Intel® Wi-Fi 6 AX200’
Updated the front & back camera module (minor modifications)
Added screwholes on the back for capacitive touch stylus holder
v1| First version

Errata and technical modifications reserved

Included Accessories

Light Tablet Docking Station

Product name	Light Tablet Docking Station
EAN number	N/A

Global Article Code

3030509197

| European Article Code

–

| Release date (D/M/Y)

01/05/2021

| Version

v1

| Global Article Code| European Article Code| Release date (D/M/Y)| Version

Easy 9-pin holder, to charge industrial tablet
DC-In interface with Input voltage 12V/2.4A (power supply included)
USB 2.0 port for easy connection to headset, keyboard or mouse
Reliable gadget that can be attached or removed in seconds

VESA 75 back plate (attached to tablet)

Product name	VESA 75 back plate
EAN number	N/A
Global Article Code	European Article Code
Global Article Code	European Article Code
3030508362	1010502277
3030509846	–

VESA 75 holes for solid mounting
Complete black PC-ABS back-plate
Easy to exchange for basic plate (optional) using 8 screws

Standard Battery (inside)

Power Supply

Plastic Screen Protector

Optional Accessories

Standard Tablet Docking Station

Product name	Tablet Docking Station
EAN number	N/A

Global Article Code

3030509073

| European Article Code

1010502266

| Release date (D/M/Y)

01/10/2021

| Version

v1

| Global Article Code| European Article Code| Release date (D/M/Y)| Version

Easy 9-pin holder, to charge industrial tablet
DC-In interface with Input voltage 12V/2.4A (power supply included)
4 USB 2.0 ports connected to the tablet directly when mounted
Reliable plastic case, easy to handle and mount

Capacitive Touch Stylus

Product name	Capacitive Touch Stylus
Model number / EAN number	FTCAPSTYLUS / 6920734091065

Global Article Code

20205003213

| European Article Code

1010501169

| Release date (D/M/Y)

01/11/2020

| Version

v1

| Global Article Code| European Article Code| Release date (D/M/Y)| Version

Easy-to-use capacitive touch stylus
Perfect accessory for the faytech flat
Light and durable aluminum housing
Requires different touch firmware for tablet, download from www.faytech.com/downloads/ or contact your sales representative

Capacitive Touch Stylus Holder