JSK P50 Intelligent Air Pump Blood Pressure Health Smart Watch User Manual

P50 Intelligent Air Pump Blood Pressure Health Smart Watch
User Manual

Device’s structure

|
---|---

Disassembly and wear

1. Disassembly
   1. Align the metal pin on the left end of the watch strap with the hole at the connection point of the bracelet, flip the metal ball on the right , and align the hole on the right to complete the installation and disassembly.
   2. The airbag is installed on the watch by default, and the airbag can be pulled out as shown in the figure; Align the convex hole of the airbag with the groove of the watch, and then press hard to complete the installation.

2. Wear
   The bracelet is best worn behind the cervical process of the ulna of the wrist. When wearing, make sure that the bottom of the bracelet is close to the skin to avoid light leakage of the sensor and affecting the accuracy of measurement.
   

Charge

This is magnetically charged, so only need to align it with the charging port and automatically attach it.
Power on/off

Switch on: In the off state, long-press the power button on the right side of the watch.
Switch off: Long press the power button on the right side of the device.

Install APP and Bluetooth connection

1. Turn on the device, turn on the Bluetooth of the mobile phone, scan the QR code below or search “MeCare” in the App Store/Google play store to download and install.
   http://www.ycaviation.com:8080/app/smart/app_download.html?apkname=MeCare

2. Register and login If you don’t have a MeCare account, please register with your email first, or you can choose “Login without an account” to enter the experience.

3. Open the APP data panel, Tap”click to connect the device”, enter the device list page, and click the “magnifying glass” in the upper right corner to refresh, then find the corresponding device to connect.
   

Operation guide of the device function interface

Device function introduction

1. Time, date & week
   For the first time, please connect to the APP to sync the correct time, date, and week.

2. Dial switch
   Long press the screen to switch the dial style. (Swipe left and right to select, tap to confirm select).
   

3. Shortcut set
   Swipe down on the main time interface to enter the shortcut interface. The specific functions are as follows: Do not disturb/Awake/About device/Bright/Set (Bright, Awake, DND, QR code, About, Reset, Off– Swipe right to return to the upper level )

4. Pedometer,calories & distance 1
   Steps, calories burnt and distance will be shown on this interface.

5. Blood pressure monitoring 1
   (1) Accurate measurement: blood pressure has been measured through airbag pressurization, which means blood pressure values can be obtained more accurately.The specific  steps are as follows: (Note: When the measurement fails, please wait 3 minutes and then measure again)
   2) Quick measurement: Click to enter the measurement page, and the measurement data will be displayed after finished.

6. Body temperature 0
   The Body temperature adopts automatic measurement mode, The icon starts to flash and records the data to save it in the APR

7. Heart rate monitoring 0
   The Heart rate adopts automatic measurement mode, The icon starts to flash and record the data to save it in the APR

8. Blood oxygen monitoring 0
   The blood oxygen adopts automatic measurement mode, The icon starts to flash and record the data to save it in the APR

9. Respiratory rate 0
   The Respiratory rate adopts automatic measurement mode, icon flashing, and vibrating to remind after the test is finished, then shows the result.

10. Sport 0
    The specific functions are as follows: Run, cycling, Fitness, TT ball, Basketball, Badminton, and Skip.(Tap any icon to enter)

11. Weather 0
    When the watch is connected to the APP, it will automatically synchronize the weather of the phone.

12. 5leep monitoring ®
    Press button 1 on the right side of the watch to find the sleep monitoring. check the duration of deep sleep, light sleep, duration of total sleep, and sleep quality.

13. Timer 0 14. Information 0
    Press button 1 on the right side of the watch to find the stopwatch. Press button 1 on the right of the watch to find the information and view the five information stores.

14. Music
    Press button 1 on the right side of the watch to find the music, and you can control the phone to play, pause and play/play the next song from the watch.

15. Camera is
    Press button 1 on the right side of the watch to find the Camera, at the same time pick up the phone(APP connected) and open the APP photo to use the device to photo.
    

APP functions and instructions

1. Dashboard
   1. Record your target steps.2 Record your steps, distance, and calories.

2. Record your blood pressure test data. 4. Record your heart rate test data.

3. Record your sleep test data,  Record your sleep time, awake times, fall asleep, woke up, deep sleep, light sleep. record your Blood oxygen test data.

4. Record your Respiratory rate test data. 7. Record your Body temperature test data.
   

5. Sport
   There are running, fitness, cycling, rope skipping, basketball, table tennis sports to choose from 9. and a synchronized watch display, when you tap “Start” in the APP, you can enter the exercise data interface 10. when you tap the small map next to the “End” button, you will go to the real-time map route

6. which could better grasp the movement distance and direction.

7. Caring
   Add parents or relatives or friends as friends, then you can check their exercise steps, mileage, calories, sleep, heart rate, and blood pressure, to know the health data family remotely.

8. Setting

   ---

|
---|---

1. Personal information: A QR code business card, nickname, age, gender, height, weight, skin color.
2. Device status: [Theme] Dial switch. [Notifications] Enter to find “Permissions”, tap on (MeCare), allow the use, and you can receive and view various reminders on the watch.
[Sedentary remind] Set the time on the APP and will remind you from the device.
[Alarm clock] Set the alarms on the APP and will remind you from the device.
[Health monitoring] Default set 10-60 minutes automatic monitoring, tap to set.
[Temp alarm] When the body temperature reaches the preset value, it will be reminded by the watch.
[Find device] Turn on this function will find the device via vibration.
[Heart rate alarm] switch on the function, when the heart rate reaches the preset value, the device will remind you.
[Wrist brightness] When you raise your wrist, the watch automatically lights up the screen. (Wearing position] Choose left-handed or right-handed wear.
[Screen intensity] the brightness of the device screen can be adjusted. (Undisturbed] Set the device to do not disturb time.
[Reset] Restore the factory state.
[Take photo] The watch controls the phone to take pictures.
[Disconnect] Disconnect the device.

5. Sports target: Set target steps.
6. Sleep target: : Set target sleep time.
7. Unit setting: Set imperial or metric units.
8. Access WeChat: Bind WeChat.
9. About us: check APP information.
10. Using help
11. Improve feedback
12. sign out

Parameter

Chip: Nordic N52832
Display: 1.3-inch High-definition big screen
Material: Tempered glass+Zinc alloy +TPU
Weight: 64g
Charge time: 2hour
Battery: 230mAh
Waterproof: IP65
standby:15 day
Bluetooth version: 4.2
Support 08: 108 8.0 or above
Android4.4 or above

Note

1. Before measuring, please make sure that you have saved correct personal information on the APP, such as height, age, gender, weight, etc, and synchronize data;
2. Sit for 5-10 minutes before measurement to keep your heartbeat calm and breathing stable.
3. Please keep relaxed during measurement, panting, talking walking and exercise will affect the accuracy of the measurement results;
4. keep a correct sitting posture, make the hands flat and keep them parallel with the heart.

Wear and maintenance

The products are suitable for wear all day, so when you wear and care for the smart device, please follow the following brief instructions:

1. Keep the smart device dry:
   1.1, Clean your wrist and the smart band/smartwatch you are wearing regularly, especially after exercise, sweating, or skin contact with soap or detergent and other substances, the substance may get inside of the product so should be cleaned regularly .

2. Keep wearing the product correctly:
   2.1, Please do not wear the device too tightly, should be able to move back and forth on the wrist.
   2.2, If using a heart rate device to record your heart rate throughout the day, the device should be flat one finger wide among the wrist bone. In order to better check the data during active exercises, wear the device among the wrist bone in about 2-3 Finger-width positions.
   2.3, Prolonged friction and restraint may irritate your skin, after a long time wearing, take off the device and give the skin a rest period.

3. Keep smart devices clean:
   3.1, If the device is damp, such as sweating or splashing, please clean and dry it, make sure the skin layer is in a suitable dry humidity, and then wear it again.

The data collected by this device is for reference only, not for medical purposes

FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>