Teenii T1 Mechanical Dual-Mode Number Keypad Instructions

Teenii T1 Mechanical Dual-Mode Number Keypad Instructions

Keypad Data

• Size: 171.7×169.5×39.78mm ±1.0mm
• Weight: 477.5±20.0g
• Lithium Battery: 500mAh
• Connection Method: 1.8M wired / BT 3.0 /BT 5.0
• BT Pairing name: ˙Teenii3.0 ˚Teenii5.0
• BT Frequency: 2402MHZ-2480MHZ (±120KHZ)
• BT input: 3.7V,
• Working current: 26mA
• Type-C wired input: 5.0V
• Working current max: 300mA

Auto sleep mode : 3 stages

1. In BT model, stop working for 60seconds, working current 1.2mA
2. In BT model, stop working for 70seconds, working current 0.3mA
3. In BT model, stop working for 30mins, working current 0.15mA
   Note: Press 1-9 keys to wake up keypad to work and BT takes 1-2 seconds to connect again.

Compatibility System:

• Windows7
• Windows8
• Windows10
• Mac OS X10.4 OR later

Product Descriptions

Function Switch button

Switch between Type-C wired and BT function

1. Short press to switch to Wired modeϸTYPE-C wired green
   Indicator is on, Keypad works in wired mode after it is connected to devices with a Type-C wire.

2. Short press to switch to BT mode: BT blue indicator twinkles. Keypad works in BT mode after it is pair with devices through BT.

How to pair with your devices through BT.

1. Short press switch to go into BT mode, and the Blue indicator twinkles.
2. Long press for 2-3 seconds, the blue indicator twinkles quickly and the keypad is in pairing mode.
3. You will find paring code “Teenii3.0 / Teenii5.0” on your device.

Just choose one of them to complete the pairing. When the keypad is paired with the device successfully, the blue indicator will stop twinkle and stay on.
(Note: For win7 or old systems, only one paring code “Teenii3.0” will be shown )

Number Lock Button (open/close number input)

• A) 1 Open keypad number input, Number Indicator is on.
• B) 1 Close keypad number input, Number Indicator is turn off.
  (Note: The Number Lock Button works with Windows/Android system but doesn’t works with iOS/Mac system.)

Charging & Low Voltage Indicator

1. When battery voltage is lower than 3.1V, the low voltage indicator twinkles, reminding you to charge it. If the battery voltage is lower than 2.4V, the keypad will stop working.
2. When you connect the keypad to power with a Type-C charging cable , red indicator stays on, indicating that the battery is being charging.
3. When the keypad is fully charged, the red indicator will turn green.

32-KEY PROGRAMMABLE & MACRO

Except for the switch button , all of 32 keys are programmable and can be set macro. Please download the APP from www.teenii.com. (Note: We now only have Windows version for the APP, you can set the keypad on Windows and then connect to the Mac system to use it if you want, the key setting will be kept with the keypad and you can use the keypad with any devices.)

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. 1. This device may not cause harmful interference, and

2. this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>