CRANNS VD10 Alarmed Disc Locks User Manual
- June 24, 2024
- CRANNS
Table of Contents
USER MANUAL for
CRANNS Alarmed Disc-Locks
Introduction
Thank you for choosing a CRANNS disc-lock alarm: the world’s strongest,
smartest, loudest motorcycle security solution. Please read this booklet
carefully.
For more information about this and other CRANNS locks, accessories and
product news, please visit www.cranns.com
Questions or comments about your CRANNS product?
Email us at info@cranns.com
Quick start guide
Your CRANNS disc-lock alarm comes with a CR2 long-life lithium battery
included. Please install battery before use.
Locking your motorcycle
- Insert key in lock and rotate clockwise. Lock barrel will spring open.
- Locate hole in front brake-disc sufficient to allow locking pin to pass through.
- Slide lock on to disc and depress key barrel to insert locking pin.
- Double-locking VD10 and VD14: turn key counter-clockwise to lock.
- Pushdown VP6: depress barrel until it clicks into place.
Fitting your CRANNS to your motorcycle’s brake disc
-
Brake disc thickness: less than 7mm (1/4”)
-
Locking pin size:
VP6 6mm (1/4”)
VD10 10mm (3/8”)
VD14 14mm (1/2”) -
Distance from locking pin to back of disc slot*:
VP6 46mm (1 4/5”)
VD10 48mm (1 8/9”)
VD14 46mm (1 4/5”)
Important: the locking pin can pass through ANY hole on disc (dark areas on diagram).
Arming the alarm
Your CRANNS Lock is Bluetooth enabled so that connect to your Smartphone and
adjust the alarm settings using the CRANNS BLE Lock app available for both
Android and IOS.
If you do not wish to use the app simply insert the battery as normal and use
can use lock as a conventional CRANNS alarmed lock.
Using the App
- Download and install the “CRANNS” App.
- Insert battery into the alarm module. You will hear a confirmation “beep” once battery is correctly inserted. Replace the battery door.
- Insert module into the lock and fit base plate.
- Open the CRANNS App and follow the instructions on the App. Once you have named your device and set a password you can adjust the settings and check your battery status. You can choose the user language in the settings menu.
- After initial setup up, the Bluetooth connection will only be active once the lock is placed on a disc. If your app is closed or interrupted after setup you will need to place you lock on a disc to reconnect the App.
- Your CRANNS alarm will be paired to your Smartphone so there will be no need to enter your password once the device is set up.
- When you remove the battery the password and device will be reset.
- If you use another device to connect to your lock you will need to enter the password again.
- You can select the user language in the settings menu.
WARNING: CRANNS 120dB alarms are extremely loud! Avoid close proximity to unprotected ears.
Battery life
- Batteries should last 6 to 8 months with normal use. Frequent triggering or extreme temperatures can shorten battery life. Keys
- Each CRANNS lock comes with three keys and a flat plate with a unique code number (ie, CMAA12345678). (ie, 1234567890) for ordering replacement keys. Make a note of your key code and store safely. We encourage you to register your lock at www.cranns.com
Register your CRANNS lock
On the Flat plate provided, you’ll find your lock’ unique ID numbers:
- Key code.
You’ll need to input both when registering at www.cranns.com
Caring for your lock
-
Use a dry cloth to keep the reflector plate inside the disc-slot clean and free of dirt, dust and grease. An obstructed reflector plate can affect performance and may cause the lock to arm when not on the brake disc.
-
We recommend applying a lock lubricant to the lock barrel every six months. If alarm is damaged
-
The alarm module is removable. Replacement modules are available from authorised CRANNS dealers or by emailing us directly at info@cranns.com
NOTE: the lock remains effective with or without the alarm system.
Transporting your disc-lock -
Ideally you should carry your CRANNS underneath the seat of your bike.
-
CAUTION: Do not carry your CRANNS in or attach it to your clothing, as this may contribute to injury in the event of an accident.
Customer care
Email us at: info@cranns.com
Don’t forget to register your CRANNS lock at
www.cranns.com
Disclaimer:
Our products are sold as security enhancements, and are not a substitute for
the end-user’s duties of normal care and attention. As such, CRANNS accepts no
responsibility or liability for any direct or consequential loss, damage or
injury arising or resulting from the use or misuse of our products howsoever
arising, save that we will always replace any product found to be defective
within the warranty period.
Disclaimer:
Our products are sold as security enhancements, and are not a substitute for
the end-user’s duties of normal care and attention. As such, CRANNS accepts no
responsibility or liability for any direct or consequential loss, damage or
injury
arising or resulting from the use or misuse of our products howsoever arising,
save that we will always replace any product found to be defective within the
warranty period.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not
expressly approved by the party responsible for compliance. such modifications
could void the user’s authority to operate the equipment.
RF warning statement:
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum 20cm distance between the
radiator and your body: Use only the supplied antenna. 221207
Copyright © CRANNS.
All rights reserved.
Documents / Resources
|
CRANNS VD10 Alarmed Disc
Locks
[pdf] User Manual
VSM-1, 2BDV9VSM-1, VSM1, VD10 Alarmed Disc Locks, VD10, Alarmed Disc Locks,
Disc Locks, Locks
---|---