onn VIPRB-100010113 Tilting TV Wall Mount User Guide
- June 6, 2024
- Onn
Table of Contents
- onn VIPRB-100010113 Tilting TV Wall Mount
- But Wait…There’s More!
- The Fine Print
- What’s in the Box?
- Get to Know Your Tilting Mount
- Let’s Get Started!
- Step 1 – Attach TV Brackets to TV
- Step 2 – Attach Wall Plate to Wall
- Step 3 – Hang TV on Wall Plate
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
onn VIPRB-100010113 Tilting TV Wall Mount
Filename: WM_ONN_Quick Start guide_OPT01 Date: 15 May 2019
Stock: 157g C2S
Size: 22.48″ x 4.25″
But Wait…There’s More!
What size TV does this TV Wall Mount support?
Your TV should be between 50” and 86” screen size.
What is the maximum TV weight this Wall Mount will support?
Your TV should not be over 120 lbs.
What TV VESA pattern will this Wall Mount support?
75mm x 75mm, 100mm x 100mm, 100mm x 200mm, 150mm x 150mm, 200mm x 100mm, 200mm
x 200mm, 200mm x 300mm, 200mm x 400mm,300mm x 200mm, 300mm x 300mm, 300mm x
400mm, 400mm x 200mm, 400mm x 300mm, 400mm x 400mm, 600mm x 400mm.
Which type of walls can the plastic anchors be used for installation?
Only use on concrete, stone or masonry walls.
Can this product be used outdoors?
Using this product outdoors could lead to product failure and/or personal
injury.
The Fine Print
CAUTION: Don’t use with products over 120 lbs to avoid injury or
instability. Thank you for your purchase.
This Limited Warranty covers any defects in material or workmanship for
purchases made in the U.S.A. and Canada, and excludes claims from conditions,
malfunctions or damage not resulting from defects in material or workmanship.
The warranty duration is one year. Keep your original proof of purchase (store
receipt). If you find the product is defective, damaged or missing parts after
inspection, DO NOT return to the store.
What’s in the Box?
- Wall plate (x1)
- Left TV bracket (x1)
- . Right TV bracket (x1)
- Hanging template (x1)
- M7x55mm Lag bolt (x4)
- Concrete anchor (x4)
- Allen wrench (x1)
- H1. M4x12mm screw (x4)
- H2. M6x12mm screw (x4)
- H3. M8x20mm screw (x4)
- H4. M4x35mm screw (x4)
- H5. M6x35mm screw (x4)
- H6. M8x35mm screw (x4)
- H7. M8x45mm screw (x4)
- I1. M8x15mm spacer (x4)
- I2. M8x5mm spacer (x4)
- J1. M4 washer (x4)
- J2. M6/M8 washer (x4)
- K. Product Guide (x1)
Get to Know Your Tilting Mount
VESA PATTERNS
- 75mm x 75mm,
- 100mm x 100mm,
- 100mm x 200mm,
- 150mm x 150mm,
- 200mm x 100mm,
- 200mm x 200mm,
- 200mm x 300mm,
- 200mm x 400mm,
- 300mm x 200mm,
- 300mm x 300mm,
- 300mm x 400mm,
- 400mm x 200mm,
- 400mm x 300mm,
- 400mm x 400mm,
- 600mm x 400mm
Let’s Get Started!
Here’s what you’ll need to get set up (not included):
Step 1 – Attach TV Brackets to TV
Choose proper screws that fit your particular TV mounting holes. Use spacers and washers as needed, they are not always required. You will have screws, spacers and washers leftover. Discard all unused hardware after you have completed TV mount installation.
Step 2 – Attach Wall Plate to Wall
Hold Hanging template at desired position, pre-drill marked 4 holes and attach wall plate to wall.
- For wood stud mounting, only use M7x55mm Lag bolts .
- For concrete, stone or masonry wall, use both M7x55mm Lag bolts and Concrete anchor .
Step 3 – Hang TV on Wall Plate
This step requires 2 or more people to complete. Hang TV to wall plate and pull down the cords and release, you will hear the latches click into place. Adjust the tilt angle by loosening handles of TV brackets. Please remember to tighten the handles after adjustments.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>