Alca PLAST A15-1-2 Filling Valve Side Metal Thread Instructions
- October 27, 2023
- Alca PLAST
Table of Contents
A15-1-2 Filling Valve Side Metal Thread
Instructions
A15-1-2 Filling Valve Side Metal Thread
A15-1/2″ /A16-1/2″ / A16-3/8″ / A16M-3/8″ / A16P-3/8″ /A15-3/8″ /A15P-1/2″ / A15P-3/8″
ASSEMBLY AND ADJUSTMENT
The valve should be installed in a horizontal position, with the outlet pipe
in a perpendicular position, attached to the cistern wall. The water level in
the cistern is adjusted by the height of the float, aided by a regulating
threading. Insert the plastic Filter into the inlet part, to catch any dirt
and water impurities. The assembly thread of valve G1/2″(G3/8″) is adjusted
for connecting to common water pipes.
NOTICE FOR USERS : After you have installed the valve, you may notice a
small vibration. Do not be alarmed, this is normal and will disappear
gradually once the air is bled through the valve. Poor performance of the
valve can occur due to clogging of the Filter, in which case you should remove
and clean it. This is why we do not recommend, especially in domestic
plumbing, water with small impurities. Calcium stones from blocked parts can
easily be removed by soaking the Filter in a 5% Common Vinegar solution for
1÷1,5 hours. Regular maintenance is recommended to ensure the valve remains in
good working order,as shown in the drawings. Only original manufacturers parts
should be used during repair or maintenance, and these are available from your
local retailer. In the event of any problems, please contact a qualified
professional. Special attention should be given to the quality of water in the
public water supply. In the case of dirt and silt in the water supply then it
may cause clogging and damage to the valve. In this case, the damage or
breakdown is not the responsibility of the manufacturer and the warranty will
not cover these cases.
Alca plast, s. r. o.
Bratislavská 2846, 690 02 Břeclav , Česká republika
Tel.: +420 519 821 117 – prodej ČR
Tel.: +420 519 821 041 – export , Fax: +420 519 821 083
e-mail:[email protected] ,
www.alcaplast.cz
© 2016 Alcaplast, s.r.o.
138 / R10 / 09 / 16 / N0091
Documents / Resources
| Alca
PLAST A15-1-2 Filling Valve Side Metal
Thread
[pdf] Instructions
A15-1-2, Filling Valve Side Metal Thread, Side Metal Thread, Filling Valve
Metal Thread, Metal Thread, Thread
---|---