RDI BC240 Wireless 720p HD ClipCam Additional Camera User Guide

June 6, 2024
RDI

RDI BC240 Wireless 720p HD ClipCam Additional Camera

WARNING: STRANGULATION HAZARD
STRANGULATION  HAZARD-Children have accidentally become tangled in cords and been strangled. Please keep all cords out of the reach of children. Use only adapters provided.

What’s included

RDI BC240 -Wireless 720p-HD-ClipCam -Additional
-Camerafig 1

Product Overview

RDI BC240 -Wireless 720p-HD-ClipCam -Additional
-Camera-fig 2

Getting Started

  1. Insert AC adapter power plug into the camera’s DC port, plug the other end into a standard indoor power outlet
  2. Place the camera in the preferred position (to best optimize the viewing area). You can place it on the table/cabinet, mount it on a wall or use the clip stand to mount it on the crib. (after pairing)
  3. To power on the camera, just plug in power adapter. No power switch or button needed.

Pairing
Pairing allows you to introduce additional cameras to the monitor.

  1. Monitor: You can connect up to 4 cameras to your system
  2. Camera: Press Pair button on the back within 30 seconds
  3. The camera’s video displays on the monitor when pairing is successful

FCC REGULATIONS

Part 15 Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

Caution: Any changes or modfi cations to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals