NEC NP-PX2201UL DLP Projector User Guide
- June 5, 2024
- NEC
Table of Contents
NEC NP-PX2201UL DLP Projector User Guide
Quick Setup Guide
-
Install the projector and mount the optional lens.
WARNING: Please be sure to consult your dealer as installation and attachment/detachment of the lens unit must be performed by a professional service personnel.
Never try to install the projector by yourself. This may result in visual impairment etc. -
Connect your computer or audio video equipment to the projector.
-
Connect the supplied power cord and attach the power cord stopper.
Make sure that the prongs are fully inserted into both the AC IN terminal and the wall outlet. -
Remove the lens cap.
-
Turn on the projector
-
Press the main power switch to the ON position ( I ).
-
Press the (POWER) button on the projector cabinet or the POWER ON button on the remote control.
-
Select a source.
-
Adjust an image size and position.
LENS SHIFT
|
* On the projector, press the SHIFT ▼▲◀ or ▶ button.
* On the remote control, press the SHIFT button. And press the ▼▲◀ or ▶ button. ---|---
FOCUS
|
* On the projector, press the FOCUS (+) or (−) button.
* On the remote control, press the FOCUS button or the ZOOM button. And press the ◀ or ▶ button. [For NP45ZL/NP46ZL/NP47ZL] You can manually adjust the edge focus in addition to the powered focus. Turn the edge focus ring clockwise or counterclockwise. ZOOM
|
* On the projector, press the ZOOM (+) or (−) button.
* On the remote control, press the FOCUS button or the ZOOM button. And press the ▲ or ▼ button. - Turn off the projector.
- Press the (POWER) button on the projector cabinet or the POWER STANDBY button on theremote control.
- Press either the (POWER) or the POWER STANDBY button again.
- Make sure the projector is in STANDBY MODE, then press the main power switch to the OFF position (○).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>