RISE miniBOOM 2 Wireless Speaker User Manual
- June 3, 2024
- RISE
Table of Contents
RISE miniBOOM 2 Wireless Speaker
Your new miniBOOM 2
❶ Speaker
❷ Power button
❸ Type-C Charging Port
❹ Charging LED indicator
❺ Microphone
❻ Hole for cord
How to charge your miniBOOM 2
- Insert the charging cable into the Type-C Charging Port.
- Connect the USB plug into SV USB power termina l.
- The charging LED indicator wi ll turn on.
- After the charging has e completed, the LED indicator will turn off.
How to enjoy music with your miniBOOM 2
- Turn on the speaker by pressing the button at the bottom, for 3 seconds. It wi ll have a sound prompt and the blue light wi ll turn on. To turn off your miniBOOM 2 press tt:he power button for 3 seconds.
- To enable the stereo mode with 2 speakers turn both of them on.Double press the power button on Pone of them and you will hear another prompt indicating that the speakers have been paired. Remember to always pair the speakers first andthen connect to your phone or another device.
- Enable Bluetooth on your device in the settings. Search for a Bluetooth device named ‘miniBOOM 2 ‘ and click connect to pair. The speaker wi ll pair, and you will hear a prompt that indicates successful pairing.
How to answer call on your miniBOOM 2
If your phone is paired to your miniBOOM 2 and you have an incoming call, simply click the power button once to answer the call. Speak into the in-built microphone and w hen the call is over, click the power button to end the call.
Useful Tips
Increase the flow of sound
Position the miniBOOM 2 as though it is facing you. You can achieve this by simply sticking it on your wall at a height that is level with your head. This will allow sound to travel directly at you.
Pair two miniBOOM 2s for surround sound
Get your hands on a second miniBOOM 2. You can pair them with your device and enjoy the best sound experience at your party!
Take you miniBOOM 2 with you wherever you go
This tiny but powerful speaker will easi ly fit into your pocket, so why not take it with you on holiday, picnic or weekend getaway.
Technical Information
| Model | miniBOOM2 |
|---|---|
| FCC-ID | 2A8T3 – mini BOOM 2 |
| Power rating | 3W |
| Frequency response | 66Hz – 22KHz |
| THO | <10% |
| Battery | 3.7V / 300 mAh |
| Play back time | upto 5 hours |
| Charging time | 1.5 hours |
| Bluetooth | 5.1 |
| Size | 5 x 3.45cm |
| Net weight | 58g |
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential insallation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.