SR SUN RISE SR-2 Shower System Instruction Manual
- June 17, 2024
- SR SUN RISE
Table of Contents
Installation Manual
SR-2 Shower System
Please do not
hesitate to contact us with your questions, concerns and/or problems, we’re
here to help. We will replace or repair your product free of charge.
Contact US: mikechen@eyakult.com (USA)
zhongly@eyakult.com (Canada)
About SR SUN RISE SANITARY
ABOUT US
Founded in 2005, SR SUN RISE, provides the best shower systems online for home
bathrooms and commercial use. We are the go-to brand for performance,
reliability, and modern shower fixtures.
SR SUN RISE ensures that all our products are health conscious, ergonomic, and
environmentally friendly. This allows us to exceed the expectations of our
consumers, even those who are accustomed to high-end lifestyles. A major goal
of ours since the brand’s inception has been to make consumers feel our
products have been personalized for their needs in an ever-evolving multi-
functional home.
SR SUN RISE products frequently appear in the world of high-end commercial
buildings in Europe, the Middle East, Asia, Southeast Asia, etc. These regions
are well-known for having lavish bathrooms.
We use science and technology to improve people’s quality of life. The
bathroom is not just the bathroom, it is the place where people unload a day
of fatigue and get to be most relaxed and vulnerable versions of themselves.
SR SUNRISE is committed to continuously improving the experience of life.
At SR SUN RISE we pride ourselves on using humane and envi- ronmentally
conscious methods to manufacture all our shower systems and products. We do
our part to make sure that we can preserve our planet. We hope to set an
example for others to also do their part so that future generations can
experience the beauty this world has to offer.
CUPC CertifiGation
IAPMO RESEARCH AND TESTING, INC.
5001 E. Philadelphia Street, Ontario, CA 91761 + Phone
909-472-4100 « Fax
909-472-4244 +
www.lapmort.org
IAPMO RESEARCH AND TESTING, INC.
CERTIFICATE OF LISTING
Issued To: GUANGDONG RI ZHENG INDUSTRIAL CO. LTD.
File Number: 12900 Revised Date: January 28, 2021
Product: Plumbing Fixture Fittings
Effective Date: January 2021
Revised Date: January 28, 2021
Void After: January 2026
This cenifcate is not evidence of urrent isting To veriy lising satus, st the
IAPMO RAT Produc Listng Directory at pd apmo org
Identification:
Plumbing supply fittings shall be marked with the manufacturer’s recognized
name, trademark, or other mark or, in the case of private labeing, the name,
trademark or other mark of the customer for whom the ftting was manufactured.
The marking shall be accomplished by use of a permanent mark of by placing a
permanent label on the product. Markings on plumbing supply fittings shall be
visible after installation.
‘Showerheads and hanc-hekd showers shall be marked with the manufacturer’s
specified maxmum flow rate, in Limin and gpm.
Kitchen, lavatory, and metering faucets shall be marked with the
manufacturer’s specified maximum flow rate, in Limin and gpm of Uicycle and
gpc.
Single-handle and single-control bath and shower mixing valves shall have
their temperature control settings identiied alphabetically, numerically, or
graphically.
High-efficiency commercial pre-inse spray valves shall be marked with the
manufacturer’s specified maximum flow rate, in Unmin (gpm)
Listed products shall bear the CUPC® certiication mark.
Packaging for plumbing supply fttings shall be marked with the manufacturer’s
name, trademark, or other mark as well as the model number o, in the case of
private labeling, the name, trademark, or mark of the customer for whom the
fiting was manufactured as well as the model number.
Packaging for showerheads and hand-heid showers shall be marked with the
manufacturer’s specified maximum flow rate and sither the manufacturer’s
specified minimum flow rate of the statement “For use with automatic
compensating valves rated at 00 Limin (yyy gpm) of less”, where xcox Limin
(yyy gpm) is the manufacturer’s specified minimum flow rate.
Packaging for kitchen, lavatory, and metering faucets shall be marked with the
manufacturer’s specified maximum flow rate, in Limin and gpm or Licycle and
gpe.
Characteristics:
Fittings may include lavatory, sink, bath & shower, lawn and sediment faucets.
Plumbing fixture fitings to be installed in ‘accordance with the manufacturers
instructions and the requirements of the latest edition of the Uniform
Plumbing Code and National Plumbing Code of Canada.
Products listed on this certificate have been tested by an IAPMO RAT
recognized laboratory. This recognition has been granted based upon the
laboratory’s comphiance to the applicable requirements of ISOIEC 17025,
Package list
WARNING: Choking hazard. Please keep all small parts and plastic bags out of the reach of children.
2-Function Shower System
- INSTALL SHOWER VALVE
Step 1: Measure valve installation dimensions.![SR SUN RISE SR-2 Shower System
-
Parts 1](https://manuals.plus/wp-content/uploads/2024/02/SR-SUN-RISE-SR-2 -Shower-System-Parts-1.jpg)Step 2: Determine the position of the valve.Step 3: Drill, hammer in anchors, fasten valve body to wall(This step is for masonry application.)Step 4: Check for level on valve bodyStep 5: Connect the water pipe. (Pipe clean and free of impurities)
Be suitable for Pex pipe, Copper pipe and PVC pipe1/2 inch male NPT fitting connection to be made with pipe thread sealant, do not over tighten
Step 6: Test for Leaks Before Installing Wall Board
1. Check the valve connector for leaks;
2. Open the valve and test the hot and cold water left and right;
3. Checking the Water diverter knob can correctly switch between the showerhead and handheld.Step 7: Tile Important Note Wall Mounted /Ceiling Mounted Installation Before Tiling After tiling, the distance from the tile surface to the brass fittings (recessed the wall) is: (D: The shower bracket (and bathtub faucet) is 0.4 inch. 2: The shower arm is 0.2 inch.- INSTALL SHOWER BRACKET
- INSATLL HANDHELD SHOWER HEAD AND SHOWER HOSE.
- INSTALL SHOWER ARM (A STYLE) AND RAIN SHOWER HEAD
3-Function Shower System
Installation Manual
Essential accessories list
- INSTALL SHOWER VALVE
Step 1: Measure valve installation dimensions.![SR SUN RISE SR-2 Shower System
-
Parts 17](https://manuals.plus/wp-content/uploads/2024/02/SR-SUN-RISE-SR-2 -Shower-System-Parts-17.jpg)Step 2: Determine the position of the valve.Step 3: Drill, hammer in anchors, fasten valve body to wall(This step is for masonry application.)Step 4: Check for level on valve bodyStep 5: Connect the water pipe. (Pipe clean and free of impurities) Be suitable for Pex pipe, Copper pipe and PVC pipe **![SR SUN RISE SR-2 Shower System
-
Parts 22](https://manuals.plus/wp-content/uploads/2024/02/SR-SUN-RISE-SR-2 -Shower-System-Parts-22.jpg)1/2 inch male NPT fitting connection to be made with pipe thread sealant, do not over tighten
Step 6: Test for Leaks Before Installing Wall Board
1. Check the valve connector for leaks;
2. Open the valve and test the hot and cold water left and right;
3. Checking the Water diverter knob can correctly switch between the showerhead and handheld.Step 7: Tile Important Note** After tiling, the distance from the tile surface to the brass fittings (recessed the wall) is: (: The shower bracket (and bathtub faucet) is 0.4 inch. (2): The shower arm is 0.2 inch.- INSTALL SHOWER BRACKET
- INSATLL HANDHELD SHOWER HEAD AND SHOWER HOSE.
- INSTALL SHOWER ARM (A STYLE) AND RAIN SHOWER HEAD
- INSTALL BATHTUB SPOUT
Warranty
Customer Name|
---|---
Retailer / Assembly Fitter|
Purchase Date|
Warranty Duration| 5 years as of purchase date
- If the above contents are not complete, the warranty will be considered void, please confirm the above contents when you purchase.
- The complimentary repairs are limited to instances mentioned on the warranty card only.
- Within warranty period, if any technical faults occur, customer should present this warranty card along with the invoice to the retailer / assembly fitter.
Guarantee Repairs Claims
-
Within warranty period, SR SUNRISE SANITARY is responsible for repairing any defective product free of charge.
-
Please contact seller via email with this warranty card and invoice if repairs are needed during the warranty period.
-
SR SUNRISE SANITARY will not be responsible for any claims listed below:
3.1 The damage and/or malfunction caused by improper use an/or repairs; or any unauthorized reconstruction; including any damage caused by abuse (i.e. fall, throw… etc.)
3.2 Please engage the services of a professional plumber. SR SUNRISE SANITARY will not be responsible for any damage and/malfunction caused by wrongful installation.
3.3 The damage and/malfunction caused by removing after installation or other factors.
3.4 The damage and/malfunction caused by application beyond the scope of usage.
3.5 The damage and/malfunction caused by sand, dirt and other impurities.
3.6 The damage and/malfunction caused by improper/insufficient maintenance; rust on finishing etc…
3.7 The damage and/malfunction caused by fir, earthquakes, flood, lightning and other natural disasters, pollution, harmful gas, salts, abnormal voltage and other factors.
3.8 On occasions when the warrantee card or invoice is not presented. -
The recommended water temperature of hand shower and rain shower is <42°C; water pressure 0.1-0.3 Mpa. The highest temperature should not reach beyond 70°C and water pressure should not exceed the limits of 0.05-0.5 Mpa. Please keep any shower products away from the heating devices to avoid potential risks.
-
This limited warranty applies only to the original end-user or business. It expressly excludes labor charges, removal charges, installation, or other incidental or consequential costs. Any in- appropriate application will void the warranty.
-
This warranty cannot be replaced if missed, please keep safe.
Clean and maintain product
How to clean shower head nozzles
- Just rub the nozzles with your finger or a toothbrush to loosen any deposits, and then run hot water for a few minutes
- Put the showerhead into a pot. Consider using a smaller container that just about fits the showerhead; this way, you will use less vinegar. You can also use a small bucket or plastic bin.
Fill the pot with enough white vinegar to cover the showerhead.
The acids in the vinegar will help dissolve the white mineral deposits on the
showerhead.
Let the showerhead soak in the vinegar for 30 minutes The more soiled the
showerhead is, the longer you will have to leave itin the vinegar.
Maintain Chrome and Brushed nickel finished product
- To clean the products all you need is a high quality microfiber cloth.
- Apply a high quality chrome cleaner to a clean cotton cloth, and wipe over the chrome. Leave as per product instructions, and then rinse with warm water. Gently remove any product residue using a dry chamois or paper towel.
- How to Clean Chrome: Homemade Solutions In addition to professional products, homespun solutions also have their place when breathing new life into dull chrome. Try this shortcut to achieving chrome cleaning nirvana:
Detergent and warm water! Submerge chrome-plated objects including pots and pans in a sink full of warm water. Add a half- cup of a high quality washing up detergent (Persil washing up liquid is good) and rub gently with a soft cotton cloth to avoid scratching the chrome. Use a scented detergent to leave kitchenware smelling fresh, as well as spotless.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>