JADMAR JSLC-SOL Solar Sign Lighting Instruction Manual

: October 27, 2023
: JADMAR

Table of Contents

INSTALLATION INSTRUCTIONS
Documents / Resources

JADMAR JSLC-SOL Solar Sign Lighting

INSTALLATION INSTRUCTIONS

Construcon and Materials

Aluminum Alloy Housing and Polycarbonate Lens
Tempered Glass Crystalline Solar Panel
Direct Wall Mount

Opcal System

210° Light Distribuon

Electrical System

Power: 5W / 10W / 15W / 20W
CCT: 4000K / 5000K
Sizes: 1FT / 2FT / 3FT / 4FT Models Available
Voltage: Solar Panel 5.5V Baery: 3.7V
Efficacy: 100 lm/W
CRI: >70
Operang Temp: -4°F to 149°F (-20C to 300C)
Charging Temp: 32°F to 113°F (0C to 45°C)

Operaon Mode

Model Number| JSLC-SOL-5W-5V-40K JSLC-SOL-5W-5V-50K| JSLC- SOL-10W-5V-40K

JSLC-SOL-10W-5V-50K

| JSLC-SOL-15W-5V-40K

JSLC-SOL-15W-5V-50K

| JSLC-SOL-20W-5V-40K JSLC-SOL-20W-5V-50K
---|---|---|---|---
LED Power| 5W| 10W| 15W| 20W
Solar Panel Power| 5.5V 4.5W| 5.5V 9W| 5.5V 13W| 5.5V 17W
Battery| Li-Ion 3.7V 8800mAH| Li-Ion 3.7V 17600mAH| Li-Ion 3.7V 26400mAH| Li-Ion 3.7V 8800mAH
Product Size| 11.81″ x 2.52″ x 4.59″| 23.62″ x 2.52″ x 4.59″| 32.68″ x 2.52″ x 4.59″| 41.38″ x 2.52″ x 4.59″
Charging Time| 8-9 Hours (1000W/m2)
LED Color| 4000K / 5000K
CRI| >70
LED Life Time| >50,000 Hours
Beam Angle| 210°
Housing Material| Aluminum Alloy and Polycarbonate lens
Solar Panel Material| Tempered Glass Crystalline Panel
Controller| Automatic Sunshine Control
Work Mode| 5 Hrs Full Brightness + 25% brightness Dimming till dawn

STEP 1:
Drill mounng holes.
Note: Models JSCL-SOL-12-5W and JSCL-SOL-24-10W have three holes and JSCL- SOL-36-15W and JSCL-SOL-48-20W have five holes. See 1.

STEP 2:
Install the wall anchors
Note: Models JSCL-SOL-12-5W andJSCL-SOL-24-10W have one hole and JSCL- SOL-36-15W and JSCL-SOL-48-20W have two holes. See 2.

STEP 3:
Install the solar light through the hanging holes on the back of the light. Note: Screws should not be in all the way. Allow a distance of about 0.12” (3mm) from the wall. See 3.

STEP 4:
Adjust the solar light with the screws. See 4.

STEP 5:
Remove the protective film from the light. See 5.

STEP 6:
Turn on the switch for the first me and it will work automatically everyday. See 6.