KAIXIN KT-T03AW Smart Multi-Color Table Lamp User Manual
- June 6, 2024
- KAIXIN
Table of Contents
KAIXIN KT-T03AW Smart Multi-Color Table Lamp User Manual
Thank you for purchasing our products. To ensure that you can fully understand and use this product, please read the manual carefully. After reading, please keep it for future reference.
Spare parts list
- 1 x Product
- 1 x Adaptor
- 1 x User Manual
Structure size
Parameters
Keys’ Function
Wireless charging performance
Wireless charging Supported devices
- Unlimited above brands and models, support all mobile phone with QI certification Max 10W wireless fast charge, but Part of the mobile phone the device has a private protocol limit, which supports a minimum of 5W wireless charging.
Control the Lamp with App
2. Tap “confirm indicator rapidly blink” if the indicator on the lamp does flash quickly in green. if the indicator is flashing slowly, tap “EZ Mode” in the upper right corner, change to “AP Mode”, and then on the next screen tap“ confirm indicator slowly blink”.(shown in Figure 3)
3. Wait till the prompt “Add successfully” appears and the lamp will appear in your “Smart Life” app.(shown in Figure 4)
NOTE: If you have trouble setting up the lamp, please find the “Help center
”by tapping“ Me” on the bottom-right of the interface.
Step 4 ：App Operation Instructions
1. Select the lamp and the app will take you to the lamp control screen. At
the bottom you will see four selection interfaces: “Dimming”, “Scene”,“ Music”
and “More”.
2. Left and right sliding “dimming” interface, Switching between white light and RGB control interface, You can control white light and RGB light separately.(shown in Figure 5 and Figure 6)
Control the lamp with Third-party App
Problems and Solutions
- If the app can’t control your lamp but its status shows “on”:
- Check if the device you’re using is connected to network and if the lamp is within range of your Wi-Fi.
- Check whether the power supply of lamps is normal 2. If the indicator turns red：
- Indicates that the lamp is disconnected from the network. Please check your Wi-Fi and make sure that the lamp is in good connection with network. Usually, the red light will stop in about 2 minutes and then the status of lamp on the app will be “offline”. When the net work is back up, the lamp will reconnect automatically. 3. Unbind the Lamp from a Certain Account：
- To unbind the lamp from a certain account, please press the Timer button for more than 5 seconds till the indicator flashes quickly in green. Then the device will return to the initial connecting status and be available for another account.
Cautions
In order to prevent accidents such as damage, fall, electric shock, fire, etc., which may threaten personal safety, please use the product according to the instruction.
- Do not use the product in places close to heat source or in direct sunlight.
- Please unplug the adapter to ensure safety before not using the lamp for a long time and cleaning the lamp.
- Do not overload the circuit, otherwise it may cause electric shock or fire accidents.
- Do not place the lamp in an unstable place (cannot be used on a slope greater than 6 degrees).
- When inspecting and repairing lamps, make sure professional electrician to operate (non-professional operators are prone to danger).
- In case of the lamp is abnormal, cut off the power supply quickly and contact the sales shop (the corresponding product model should be provided when repairing – refer to the display content on the lamp body).
- If the external flexible cable or cord of the lamp is damaged, the cord should be replaced by the manufacturer or service agent or a similarly qualified person to avoid danger.
- This light source is not replaceable.
FCC RF exposure statement:
The equipment complies with FCC Radiation exposure limit set forth for
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC Radiation exposure limit set forth for
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Read More About This Manual & Download PDF: