Shenzhen Baixinbang Technology AUV5200 Intelligent Noise Reduction Bluetooth Headset User Manual
- June 4, 2024
- Shenzhen Baixinbang Technology
Table of Contents
Shenzhen Baixinbang Technology AUV5200 Intelligent Noise Reduction
Bluetooth Headset
Product Overview
Earphone
- Soft rubber ear hook (pluggable)
- noise reduction microphone indicator
- Battery box
- Main microphone (L)
- FMB
- Main microphone (R)
- Horn cavity
- Battery indicator
- Silicone ear cap
production specifications
- Product Name AUV5200
- Support mode: HFP/HSP/A2DP
- Bluetooth version: 5.2
- Work distance 10M
- Standby time 250H
- Earbuds battery: 110Ah/3.7V
- Playing time 12H
- Charging time 1-1.5H
Function Operation
Power on: Keep touching the MFB for 2s, red light for 1s. Power on
Successfully, prompt sound “power on
Power off: Standby mode, keep touching the MFB for 5s, red light for 1s,
prompt tone “power off” Paired phone successfully: The headset will
automatically enter the pairing mode when the headset is turned on, and the
red and blue light flashes then turn on the phone settings, enter the
Bluetooth device, refresh the Bluetooth click the AUV5200 option, and wait a
few seconds to pair successfully. Pairing is successful with a beep, the
prompt tone is “Connected” and the light stops flashing.
Automatically connect back: After the connection succeeds, the Bluetooth
headset will automatically connect back to the Bluetooth device when it is
turned on again. Prompt tone “Connected” when connecting successfully. Note:
The Bluetooth headset will preferentially connect back o the last connected
Bluetooth device
Bluetooth disconnection: The headset will be automatically disconnected
if it is out of range
Disconnect Automatically from a distance Connect back: Disconnect the
connection if the distance is beyond the use range, and return to the
Bluetooth device within 5 meters within 5 minutes. The headset will
automatically connect back. (When connection back is successful prompt tone
“connected”
Play/Pause Music: In the playback state, one touches the MFB button music
to pause /play music.
Answering calls: In the incoming call state (when the call comes in,
Prompt tone incoming Cal”), one-touch the MFB key of the Bluetooth headset to
answer the call.
Hang up the phone: Incall state, two-touch the MFB key of the headset to
end the call
Reject a call: In a ranging state, hold the MFB button for 2s
Next song: In the playing state, double-touch the MFB key of the right
Bluetooth headset to switch to the next song.
Previous Song: without this function
Volume+: In music mode, long press the MFB key to add volume, If you let
go, the volume will stop increasing. (when the volume is maximum, a long touch
of the volume button can circulate the volume)
Volume-: without this function
Siri/Google assistant: In standby/music mode, triple-click the Bluetooth
headset MFB button
Cancel dialing: In the dialing state, long 2s of the MFB button of the
Bluetooth headset to cancel the dialing
Low battery tone: When the voltage is low it will report a low battery
prompt (report once every 100 seconds), and the red light will flash slowly.
iPhone battery display: Bluetooth connection status, Apple mobile phone
has power display. (Display the battery level of the Bluetooth headset.
iPhone volume synchronization: The Bluetooth connection is successful and
the device is synchronization with phone volume. (display the volume level of
the Bluetooth headset)
Intelligent Sleep mode: The headset will automatically shut down in about
5 minutes after the connection between the headset and the Bluetooth device is
disconnected
How to pairing
- First Start
Press and hold the function key for 5 seconds to start the machine and enter the pairing mode (the red and blue lights flash alternately), Open the Bluetooth function of the device, search for “AUV5200” and click pairing, It can be used after successful pairing
- Matching records available
After the connection succeeds, the Bluetooth headset will connect back automatically connect back to the Bluetooth device when it is turned on again,
- Please complete the Bluetooth matching within 5 minutes. the earphone will automatically turn off if the timeout is not Completed
- Note: The Bluetooth headset will preferentially connect back to the last connected Bluetooth device
Wearing method and guidance
How to charge
For first use, please make sure the earphone is fully charged. Charge to
the earphone
When the charging cable is connected to the battery case, the battery case
displays a red light and charging indication. Until the headset is fully
charged the light turn to blue light. Use a 5V/A power adapter
The usage off left and right
Rotate 180 degrees, wear left and right earphones, and break through the free rotation of the earpiece, There is no restriction on the alternating left and right
- Unplug the host
- Rotate the main unit 180 degrees, and then insert it into the ear hook
Q8A
- Q: Why headphones can’t be charged?
- A: When charging, make sure that the charging cable is connected
- Q: Why my earphones not be powered on ??
- A: Please make sure that the headset has enough power and that the type-c male and female seats are plugged in.
- Q: Why is there no sound when the headset is connected to the mobile phone
Bluetooth device?
- A: Please check whether the voice of the mobile phone/Bluetooth device is turned on
- Q: The wireless headphone reception is poor or lag?
- A: Bluetooth is short-range wireless communication technology. When we say it can transmit over a distance of 10 meters, it doesn’t Include a variety of use and uses the environment and special circumstances, please check the surrounding is not electromagnetic interference
- Q: Why can’t you hear someone on the phone or listen to music?
- A: Please check the following points:
- When you make a call, select the speaker mode as ‘AUV5200″
- When a call comes in, please double control the Function button to answer
- The connection mode of the wireless earphone includes “mobile audio’ and “multimedia audio’. Please confirm two of them on your mobile phone are allowed.
- Q: Why can’t the headphones pair with my device?
- A: Please check the following points:
- Please confirm that the headset is powered and in pairing mode(Headphone red and blue lights flicker alternately)
- Please confirm whether the headset is connected to another device. If so, please disconnect and turn off the Bluetooth of that device.
- Please confirm whether the headset is within 1 meter of the device.
- If the above steps still do not solve the problem, please contact our after-sales service.
-
Notes
Please use this headset according to local laws and regulations. -
Please place the headset in places where children can’t reach them. Swallowing some
-
parts can result in severe consequences such as suffocation.
-
Please don’t place the headset in extreme cold or heat (below 0 °C (32 °F) higher than 45 °C (113 °F)) place; it will lead to letting this device deformation, reducing the device battery power, shortening the battery life.
-
Please don’t keep in a high sound volume for long hours, as this will damage your
-
hearing. Please listen to music or make phone calls at the lowest volume.
-
Please charge this product for at least one month to extend the battery life.
-
Standard 5pin USB interface, please use the charger of 5V1A to charge the charging box.
-
Please note that if the product is not used for a long time, the battery capacity will slowly drain away.
- Warning
- If the battery used in this product is not used properly, it may cause fire or chemical
- burns. Dispose of the battery in accordance with local regulations. If possible, please
- recycle. Do not dispose of the battery as household waste or throw it into the water.
- Warranty
- This warranty covers any defects in production techniques
- This warranty does not include problems caused by negligence or failure to follow this
- User Manual.
- f you have any questions, please feel free to contact us!
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet the general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>