SORBUS DRW-CR-RUBLK Black Steel Clothes Rack with Fabric Drawers and Wood Top Instruction Manual
- October 30, 2023
- SORBUS
Table of Contents
SORBUS DRW-CR-RUBLK Black Steel Clothes
PACKAGE CONTENTS
FOR EACH STEP MAKE SURE THE FRAMES ARE FACING THE CORRECT DIRECTION!
Step 1: Insert frame pegs (G) into the legs of frames (B,C), twist until tight.
Step 2: Secure left frame (B) to frame pole (D) with large screws (L) then tighten with hex key (Ia). Secure wood shelf (A) to left frame (B) with wood screws (K). Then tighten with hex key (Ia).
Step
3: Repeat with right frame (C). Set aside. 
Step 4: Next, secure upper frames (F) to wood shelf (A) as shown above with wood screws (K) then tighten with hex key (Ia).
Step 5: Secure upper frames (F) to hang bar (E) as shown above with large screws (L) then tighten with hex key (Ia).
Step
6: For this step make sure the frame connector (J) doesn’t fall into the
frame. Carefully place frame connector (J) into the left frame (B) as shown.
Secure with small screw (M) and tighten with hex key (Ia). Repeat with the
right frame (C).
Step 7: Align assembled lower frame (B,C) to assembled upper frame (D) as shown. Secure with small screw (M) and tighten with hex key (Ia).
Step 8: Expand rear bars (H). Align to semi-assembled frame. Secure rear bars (H) to frames (B,C,D) using medium screws (M) as shown. Tighten with hex key (Ia).
Step 9: Unfold drawers (N) then place drawer insert (0) inside. Secure handle (P) and handle screws (Q) to the drawers (N) using the hex key (lb).
Step 10: Insert drawers (N) into assembled storage dresser. Make sure everything is tightened & secure before use. Enjoy!
Step 1: Drill a hole into the wall using a 6mm bit and gently insert the wall anchor (A) with the help of a hammer.
Step 2: Place the shelf against the wall, and insert the wall mount screws (B). After making sure everything is secure, feel free to use. Enjoy!
Step 1 : Place wood sticker (A) on top of the wood top as shown.
Step 2: To connect two clothing racks together, clip frame connector (B) to the shelf frames as shown.
