CPH2005 Oppo Find X2 Lite Smartphone User Guide
- June 4, 2024
- OPPO
Table of Contents
CPH2005 Oppo Find X2 Lite Smartphone
Greetings from OPPO Mobile
This guide will show you how to use the phone and its important functions. You may also visit OPPO official website to get more information about the phone.
PARTS NAME
- Light& color / temperature sensor
- Recelver
- Front Camera
- Volume Key
- Touch-screen
- SIM card tray
- Main MIC
- Proximity sensor
- Sub MIC
- Power Key & Screen Lock Key
- Screen Fingerprint
- Speaker
- USB &Headphone Jack
- Wide angle camera
- Laser focus
- Main camera
- Color temperature / sensor&flash
- Third MIC
- Periscope camera
- NFC
Accessories and Software Information
You are provided with the following standard accessories:
- 1 Phone,
- 1 Charger,
- 1 Earphone,
- 1 ŪSB data cable,
- 1 Safety Guide,
- 1 Quick Guide,
- 1 SIM Ejector Tool.
The product software version is: ColoroS V7.1
For the most recent information about accessories and software, please see the
DoC (Declaration of Conformity) at
vwww.oppo.com/en/certification
How to reboot the phone
Press and hold the Power Button and Volume Up Button at the same time until the OPPO boot animation is displayed to reboot the phone.
How to Transfer Old Mobile Content to a New Mobile
You can use OPPO Clone Phone to easily transfer photos, videos, music, contacts, messages, apps, etc from your old phone to the new one.
- If your previous phone was a non-OPPO Android phone, search “OPPO Clone Phone” in the Google Play store and install the app. You can also scan the QR code below to install it. If your previous phone was an OPPO phone, you don’t need to install this app. Then run Clone Phone on both phones and follow the on-screen instructions.
- If your previous phone was an iPhone, run “Clone Phone” on your new phone, and follow the onscreen instructions to migrate your data from your iCloud account.
Warning
Your device has been tested ina controlled environment and certified to be
splash, water, and dust resistant in specific situations (meets requirements
of classification IP68 as described by the international standard IEC 60529;
test conditions: 15-35 C, 86-106 kPa, 1.5 metre, 31 minutes). The waterproof
and dustproof level might decrease asa result of normal wear. Do not charge
vour device in wet conditions.
CLASS 1 LASER PRODUCT
This device is classified as a Class 1 Laser product per lEC60825-1:2014. This device contains a Laser that could be damaged during repair or disassembly, which could result in hazardous exposure to infrared laser emissions that are not visible.This equipment should be serviced by OPPO or an authorized service provider.
Specification
Radio Waves Specifications
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>