IPAN IPAN V2 Easyclip Wireless Charger User Guide
- June 6, 2024
- IPAN IPAN
Table of Contents
IPAN IPAN V2 Easyclip Wireless Charger
Forewords
Please read this manual before using the device to ensure safe and proper use
of all parts of the solution. Images/illustrations may differ in appearance
from the actual product. Content is subject to change without notice. Before
using the wireless charger, make sure it is compatible with your device.
Educational icons
Warning:
- May cause injury to yourself or others.
- situations that could damage your device or other equipment
- Notice: notes, advice for use or additional information.
Hardware description
Important
Check the presence of the following products in their respective packaging:
The items supplied with the device and any available accessories may vary
by region or service provider
- The supplied items are designed only for this device and may not be compatible with other devices.
- Appearances and specifications are subject to change without notice.
- Use only accessories approved by your mobile phone. The use of unapproved accessories may cause performance problems and malfunctions not covered by the warranty.
- The availability of all accessories is subject to change depending on the manufacturer.
Usage conditions
All of the equipment listed above is designed for indoor use, outdoor use may
be considered, to some extent, even if the characteristics and performance of
the equipment may be altered if subjected to high
variations in temperature / humidity conditions.’
Assembly
Charging spot (IPN-E2-CRC / IPN-E2-USBC)
Usage.
Charge your mobile phone
Do not place foreign objects such as metallic objects, magnets, magnetic
stripe cards between the mobile phone and the charging surface. The mobile
phone may not charge properly or be damaged by the risk of overheating. Check
the power indicator on the mobile phone.
Once the mobile phone battery has been charged up to 100%, pick up the mobile phone from it charging location. magnets, magnetic stripe cards between the mobile phone and the charging surface. The mobile phone may not charge properly, or be damaged by the risk of overheating Do not place foreign objects such as metal objects,
- When the mobile phone is not properly aligned with the charging surface, charging may not be done correctly.
- Wireless charging may not work properly if your mobile phone has a thick case.
- If you use the wireless charger in areas where the network signals are weak, you may lose network reception.
- If you connect a charger to the mobile phone during wireless charging, the charging function will not be available.
- The wireless charger is compatible with devices certified Qi by the WPC (Wireless Power Consortium).
- To save energy, unplug the charger when not in use. • The power outlet must be installed near the equipment (charging bay) and must remain easily accessible.
Connectivity and configuration ( model / options dependant)
On compatible models (IPN-E2-CRC, IPN-E2-USBC), the commissioning phase may require the activation of the charging point. For this step, the use of the IPAN IPAN SERVICE mobile app (or integration of the sdk into the installer’s existing application) may be required. Once installed, the compatible application is started and the person in charge of activating the service is invited to authenticate using the appropriate login/passwords. Within the application, the user is invited to confirm the project and the place of intervention by scanning the QR CODE indicated on the corresponding intervention sheet, and proceed to the activation step by ensuring that the all the charging points are supplied. Once confirmed, the application performs the required configuration/update operations and indicates the progress of the step to the user. The activation phase ends once the step is completed, it may take several minutes depending on the number of charging points to be treated.
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This device complies with RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. This device must operate
with a minimum distance of 20 cm between the radiator and user body.