GULAKI DFSC221 Neck Fan Speaker Instructions
- June 6, 2024
- GULAKI
Table of Contents
GULAKI DFSC221 Neck Fan Speaker
Instructions
Safety Warnings for product use. Please observe all safety warnings. The
Speaker Light with Warmer is not a toy, treat it as a piece of equipment.To
prevent damage or harm to those using this product and those around them, we
ask that you observe all warnings.Please exercise caution when using this
product; it runs son acharged battery Followallinstructionsproperlyfor
charging and disposing of ofthis battery
How To Charge
The battery needs to be fully charged before use
- insert provided USB end of charging cable plug into a power source: Af: USB adapter, portable charger, or PC USB port Be sure to power sources equal to or greater than SVl.OA
- insert the Type- C USB charging cable plug into the small port on the product Always fully insert USB charging cable in to both power source and product when chargirng
Device Pairing
Press the power < button to turn on the power.
Bluetooth ON/OFF
Press and hold the Multi-function button for more than 3secoods, and the blue
LED will blink to indicate that the device is ready for pairing with another
Bluetooth device. Prior to pairing, please review the instruction manual Press
and hold the Multi-function button again for more than 3seconds to turn off
the power.
[Nameof device: Speakerlight J
You will hear a sound effect if the pairing is successful ,will automatically
connect to the last connected device from the next start up To connect with a
different device,set to pairing mode again
How to use the speaker
-
To turn on, press & hold Speaker on/off button for 3seconds.The surrounding light will light -up blue when on.
-
To play & stop music,push the Speaker on/off button
Use the +/-button to control volume. -
To turn off ,press & hok 1 Speaker on/off button for 3seconds
Bluetooth
The communication distance between the Bluetooth-equipped devise and this devise is approximately 10m. However, the communication distance may vary depending on the surrounding environment. Wireless communication with all Bluetooth-enabled devices is not guaranteed. For compatibility between this device and Bluetooth-compatible devices, please refer to the instruction manuals supplied with each Bluetooth-compatible device. The Bluetooth function of this product conforms to and has been certified by Japanese domestic standards and FCC standards (US standards). The use of the Bluetooth function may be restricted in some countries and regions. Please check the conditions such as laws and regulations of the country/region when using this product overseas. In the frequency band used by the Bluetooth function, in addition to home appliances, industrial, scientific, and medical devices, wireless stations that require a license, certain low-power wireless stations that do not require a license, and amateur wireless stations are operated. Make sure that no other wireless stations are operating nearby before using this product. In the event of an incident of radio interference between this product and other wireless stations, change the location where this product is used or stop the operation of the device (stop emitting radio waves) immediately. The Bluetooth® word mark and logo are registered trademarks and are owned by Bluetooth SIG, Inc. “SPICE CO., LTD.” uses these marks and logos under license.
Since a nickel battery powers this product, we have put together some useful information about the battery. Please read the below information.
- Q: My battery won’t stop charging! The light indicating this product is charging does not shut off. I am not sure if the product is defective or not …
- A: Don’t worry this product is not defective To help the light on this product function normally please use & charge this product consecutively 2-3 times The charging light should begin to operate normally
How to properly use and care for this product nickel battery Letting the battery die is one major cause of a shortened battery life Letting the battery completely drain out before re-charging will enhance battery life, allowing this product to operate for longer later” is a common misconception and will actually shorten the lifespan of this product Nickel battery, like the one in this product, are strong and have long run times, thus they run better and more efficiently when charged regularly. This product’s on/off button will flash pink indicating when the battery life is low, around 25%. Please charge this product as soon as possible when the pink light begins flashing. Always store this product with a full charge, especially when not in use for an extended period of time such as six months or more.
- During the summer the internal temperature of a car can easily rise about 1 58F or 70C, so please do not leave or store this product in hot car or similar temperature conditions
- Be sure you store this product in a cool dry environment so it is ready to use when you need it! Ideal storage temperature 40F-100F. Use this product in temperatures between 40F-1 22F.
- Always handle products with care. We know you know this, but this product is not a toy, so please do not throw. Discontinue use immediately if broken. Intended for use by individuals 12+.
- This product arms are flexible, please do not rotate/bend to either side beyond 180 degrees.
- This product is perfect for humid climates, but not in the rain as it is not waterproof. Wipe product dry if it gets wet.
How to use with phone
- To answer an incoming call when listening to music, press the Multifunction button. To reject an incoming call press & hold the Multifunction button for 3 seconds.
- After answering a call, push the Multifunction button and you will hear the other person’s voice on your phone speaker. Push the Multifunction button a second time and their voice will be projected on the Speaker Light speaker.
- To end a call, push & hold the Multifunction button for 3 seconds.
- Music will resume automatically after the end of a call.
- To completely turn off the phone connection, push & hold the Multifunction button again for 3 seconds.
How to use LED Light
- To turn on LED Light, press & hold the LED Light button for 3 seconds, and the light around the button will light up yellow and the LED lights will flash.
- Press the LED Light again and enjoy continuous light.
- To turn off press & hold the LED Light button for 3 seconds.
CAUTION
if used incorrectly, there is risk of serious injury or death.
- When using, if this product overheats, smokes or emits any strange smell Immediately turn off the product and discontinue use. If this happens while charging, disconnect USB charging cable at once.
- Please do not modify or try to repair this product as this may result in electric shock or fire.
- This product may stop working if dropped or exposed to high impact. Do not violently shake this product.
- If this product malfunctions or is damaged, please discontinue use.
- Please handle the USB charging cable with care, avoid bending or twisting.
- When unplugging the USB charging cable, always pull gently while holding on to the plug portion.
- Always fully insert the USB charging cable into both the power source and product when charging. Once the product is fully charged, disconnect the USB charging cable immediately.
- Do not connect or disconnect the USB connector with wet hands.
- Disconnect the USB plug from the USB port when cleaning.
- Do not shine lights directly into the eyes or face as this may impair vision.
- This product is not waterproof, so avoid using in rain or other wet environments.
- If the product does get wet, wipe the water away immediately.
- Avoid handling products with dirty hands. If this product gets dirty, gently wipe clean with a dry cloth.
- Do not use while sleeping or ¡n the bathtub
- Do not let those who cannot communicate if a problem occurs or those who are handicapped use this product.
- The product is intended for individuals 12+.
- Do not leave or store this product in the car, near a heat source, in direct sunlight or in any high-temperature environment.
WARNING
- This product is not a toy. This product requires a power source equal to or greater than 5V 1.0A for charging.
- Understand specs and warnings for AC USB adapter, portable charger, or PC USB port before pairing with this product. . Always disconnect the USB charging cable prior to use.
- Operation is not guaranteed for simultaneous use with other USB devices.
- When the battery is low, the LED Light on/off button will glow pink.
- Avoid shining light directly at others.
- Light head arms are flexible and may be bent or rotated up to 180 degrees. Do not bend beyond this point. . Please stop use if any part of the product or cord becomes discolored, deformed or damaged.
- Before turning it on, make sure the volume is low. Sudden loud sounds can impair hearing.
- Protect ears & hearing by not listening at a high volume.
- Respect others around you and do not use them in prohibited areas like airplanes, medical facilities, waiting rooms, etc. as radio waves may interfere or have a negative impact.
- If the user has a pacemaker or other medical device, please consult with a doctor before using. . Avoid using around another direct heat source.
- When used in dry climates, users may experience higher than normal levels of static electricity in areas that contact this product. This is not a product malfunction.
- Please stop use immediately and consult a doctor if any skin irregularities, rashes, irritations, etc. form.
- Please do not use it with pets or other animals.
- Best to avoid contact with sunscreen or lotions as this may dull or change product color.
- Wipe off sweat.
- Store in a cool dry place.
- Color may fade or change due to friction or when used in direct sunlight for long periods of time.
DANGER DISPOSAL OF THE PRODUCT This product contains NiMH batteries, so please recycle and/or dispose of based on regional laws.
Federal Communications Commission
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment The device has been evaluated to meet general RF exposure requirements the device can be used in portable exposure conditions without restriction