quantum QSE100 True Wireless Earphones User Manual

quantum QSE100 True Wireless Earphones

Important Safety Information

Read this section thoroughly before using the product. Please ensure you observe the safety instructions to avoid accidents, injury and damage.  This product is not intended for use by persons (including children) with limited physical, sensory or mental abilities or lacking experience and/or knowledge, unless they are supervised by a person responsible for their safety or have received and understood the instructions/safety warnings for use of the product from this person in advance.

Safety Warnings

• Keep the product, packaging and its components out of reach of children.

• Contains small parts which can be a choking hazard if swallowed.

• DO NOT let children play with the product.

• • This product contains magnetic material. Consult your doctor on whether this might affect your implantable medical device if you have one.

• DO NOT attempt to open or disassemble the product.

• DO NOT use with medical equipment simultaneously.

•  DO NOT drop, step or put heavy objects on the product.

• DO NOT use the product at a high volume for prolonged periods of time as this can cause hearing loss.

  • To avoid hearing damage or loss, use the product at a comfortable volume level.
  • Turn the volume down on your Bluetooth® device before placing the product in your ears, then turn the volume up gradually until you reach a comfortable listening level.
  • If you experience persistent hearing loss, consult your doctor.

• Remove product immediately if you experience a warming sensation or loss of hearing.

• Use caution and abide by applicable laws for earphone use. Focus on your safety and that of others if you use the earphones while engaging in any activity requiring your attention, e.g. while driving, riding a bicycle or walking in or near traffic, a construction site or railroad, etc. Remove the earphones or adjust your volume to ensure you can hear surrounding sounds, including alarms and warning signals.

• If you experience any skin irritation from wearing the product, remove the product immediately and consult a doctor if the irritation persists.

• DO NOT use the product while sleeping.

• DO NOT submerge or expose the product to water as this can damage the electronics.

• This product is equipped with an in-built Li-polymer battery. Failure to follow these instructions could cause the Li-polymer battery to leak acid, become hot, explode or ignite and cause injury and/or damage:

  • DO NOT expose to temperatures over so·c.
  • DO NOT use or store the product in the following conditions: near sources of heat, direct sunlight or high temperature; moist or humid environments; dusty locations; near fire, flammable gas, chemicals or oxygen rich environments; locations easily subject to vibrations or shock or in a pressurized container; in high frequency or strong magnetic field areas – e.g. surgical equipment, MRI, CT, microwave ovens.
  • If battery leakage occurs and comes into contact with the skin
    or eyes, immediately rinse with plenty of water and seek
    medical advice.

• The product must only be supplied at safety extra low voltage (SELV) corresponding to the marking on the product/product manual.

• The product must only be charged with the supplied USB Charging Cable. It must only be charged according to the power rating indicated.

• This product operates in an unlicensed ISM band at 2.4 GHz. In the event this product is used near other wireless devices such as microwave and wireless LAN, which operate on the same frequency band as this product, there isa possibility that interference may occur. If interference occurs, stop the operation of the other devices or relocate this product away from other wireless devices before attempting to use it

Components

1. Charging Base Indicator for Earphones
2. Charging Base Opening
3. Charging Base Indicator
4. Micro USB Charging Port
5. Indicator and Mic Hole
6. MFB (Multi Function Button)
7. Charging Pogo Pin
8. Ear Tips

Box Contents

• 1 x Set TWS Earphones
• 1x USB Charging Cable
• 1x Charging Base
• 3x Sizes of Ear Tips (S,M,L)
• 1x Instruction Manual

Features

• Bluetooth® Connectivity
• High quality speakers
• Small and compact
• Ergonomic design
• Sleek and comfortable fitting within each ear
• Suitable for listening to music  making/receiving phone
• 6 hours of music and talk time per charge
• Charging Base holds 2 x charges
• Automatic TURN ON / PAIRING / TURN OFF functions
• Siri or Google Assistant activated voice control
• Volume control UP/DOWN
• Forward/backward audio calls selection
• Battery charging indicator
• USB Charging

Earphone Indicators

flashes red & blue alternately
2|

TWS Pairing

| After TWS pairing is successful, the indicator of the right earphone flashes red and blue
3|

Standby Mode

| Indicator light of right earphone flashes blue every 5 seconds
4|

Call Mode

| Indicator light of right earphone flashes red every 5 seconds

5

| Earphone Charging Mode| Earphone light is red when being charged and will tum off after fully charged
6| Power-On Mode| The indicator flashes blue 3 times.
7| Power Off Mode| The indicator light flashes red three times
8| Low Power Mode| Indicator Light flashes red once every 20 seconds

Base Charging Indicators

Status No.| Status| Indication

1

|

Light indicator at back of charging base

| 1 flash every 5 seconds = 25% battery

2 flashes every 5 seconds= 50% battery

3 flashes every 5 seconds= 75% battery

4 flashes every 5 seconds= 100% battery

2

|

Charging Mode

| The red light indicator flashes when being charged. The red light will be steady when fully charged.

When there is no charge, the red light will be off.

3

| Powering Earphones| When powering the earphone, the base indicator flashes according to times in order to show battery power remaining.

**Identifying Left and Right Earphones

**

Using Earphones

Charging the Earphones
The indicator light of the earphone is red when being charged, and will tum off automatically after being fully charged.

Place the earphone (L) (R) into the corresponding position of the charging base.

Charging the Base

• Use the USB charging cable to charge the base.
• Use the USB charging cable provided to connect with a suitable computer USB port
• Use th e USB charginh cab Ie provided to connect with a suitable charger

Turning the Earphones ON/OFF

Method

• In OFF MODE, press and hold the right or left earphone Multi-Function Button (MFB) for 2 seconds to turn on.
• In ON MODE, press and hold the right or left earphone MFB for 5 seconds to turn off.

Method
Pick up the earphones from the charging base to tum them on automatically.

Place the earphones back into the charging base and close the cover to turn them off automatically.

TWS Pairing

Pick up the two earphones from the charging base to power on and wait for 10 seconds. The two earphones will enter auto-pairing mode. The two earphones will pair with each other after a few seconds, with the right earphone flashing red and blue. The earphones will then connect with your device’s Bluetooth® function.

In OFF mode, press MFB button on each earphone to power ON and wait for 1 O seconds. The two earphones will enter auto-pairing mode. The two earphones connect with each other after few seconds. Search your device’s Bluetooth® function for “Quantum Sonic”. Press “Quantum Sonic” to connect the earphones to your device. You will then hear an audible “Left/Right Connected” and finally an audible “Connected” voice. Both earphones will now be connected to your device and will be ready to accept a Bluetooth® signal.

Search for the name “Quantum Sonic” from your device’s Bluetooth® device list.
Note: If you are having trouble connecting, go into your device’s Bluetootlt> settings, find QSE100 and “Forget this Device” and re-pair the device.

Answering and Ending a Call
When answering an incoming call, short press MFB button of the right or left earphone to answer the call after a “beep” is heard. To end a call, simply press the MFB button of either the right or left earphone. You’ll then hear a “beep” which signals that the call has ended.

Reject a call

Press and hold the MFB button of either the right or left earphone for 2 seconds to reject the call. The earphone emits an audible “beep” twice and indicates “call rejected”.

Voice Dialing

In standby mode or while playing music, short press the MFB button of the left earphone and you will hear a “beep” once. This feature is only supported with a device which has a voice dialing function. Activate Siri® or Google™ Assistant with this feature.

Music Pause/Playing

In standby mode or while playing music, short press the MFB button of the left earphone and you will hear a “beep” once. This feature is only supported with a device which has a voice dialing function. Activate Siri® or Google™ Assistant with this feature.

Volume+/-
In call mode or music playing mode, double click MFB button of the right earphone to volume UP. Double click MFB button of the left earphone to volume DOWN. When the earphone reaches maximum or minimum volume, a “beep will be heard.

Forward/backward
In music playing mode, long press MFB button of the right earphone for 2 seconds to forward to the next song. Long press MFB button of the left earphone for 2 seconds to rewind to the beginning of the song. Immediately long press again the left earphone for 2 seconds to go back to the previous song.

Maintenance

• Do not use abrasive cleaning solvents to clean either the earphones or the charging base.
• A soft cloth should be used to clean regularly.
• Do not allow the earphones to come in contact with any sharp objects or moisture, as this could cause damage to the product.
• Store in a safe cool dry place, away from children as per Safety Warnings.

Warranty Information

Please register your warranty information at:

• AUS – www.jadavey.com.au
• NZ – www.jadavey.co.nz

This Quantum Sonic product is warranted to be free of manufacturing defects for 1 year from the date of purchase. This warranty is void if the product is modified or altered is subject to misuse or abuse, damaged in transit or lack of responsible care, is dropped, if damage occurs by reason of failure to follow the written instruction booklet enclosed, or if product repairs are carried out without authority from J.A. Davey Ply Ltd. We will repair, or at our option replace free of charge, any parts necessary to correct material or workmanship, or replace the entire product and return to you during the period of the warranty. Otherwise, we will quote for any repair which will be carried out on acceptance of our quotation. The benefits conferred by this warranty are in addition to all other rights and remedies in respect of the product, which the consumer has under the trade practices act and other state or territory laws in Australia and New Zealand. Our goods come with guarantees that cannot be excluded under Australian and New Zealand Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

BEFORE YOU SEND IN YOUR PRODUCT FOR SERVICE
Before sending in your product for service, please take a few minutes to do the following:

• Read the instruction manual thoroughly. Product instruction manuals can be downloaded online.
• Contact Quantum Sonic customer service. Our staff are trained to assist you with most issues you may have experienced, without the need to send your product in for service.

PLEASE CALL OUR TOLL-FREE NUMBER:

• IN AUSTRALIA: Free call: 1800 807 464
• IN NEW ZEALAND: Free call: 0800 523 583

SENDING IN YOUR PRODUCT FOR SERVICE

1. Should repair be needed within the warranty period, enclose the cut-out section of the warranty form and your proof of purchase receipt. Please ensure all relevant details are completed before sending your product in for service. Please ensure your contact details are still current and include a brief description of the problem you are experiencing together with your purchase receipt.
2. Include the product with all components in your package. This is extremely important, so our repair technicians can make the correct diagnosis with any problems.
3. Please return the product and warranty form at your cost to:

IN AUSTRALIA
J.A.Davey Ply Ltd Quantum Sonic Repairs PO Box 84
Port Melbourne Victoria, Australia 3207

IN NEW ZEALAND:
BV Medical
Quantum Sonic Repairs Unit 7, 110 Mays Road Onehunga
Auckland, New Zealand 1061

Specifications

• Bluetooth® Version: V 5.0
• Bluetooth® Profiles Supported: HSP, HFP, A2DP, A VRCP
• Audio Decoding Protocol : SBC AAC
• Transmission Power: Class 2
• Operation Range: Up to 10 meters
• Frequency Range: 2.4GHz-2.48 GHz
• Earphone Battery: 48mAH Li-polymer Battery (in-built)
• Earphone Charging Voltage: 5V
• Earphone Charging Time: Approx. 1.5 hours
• Charging Base Battery: 300mAH Li-polymer Battery (in-built)
• Base Charging Voltage: 5V
• Base Charging Time: Appox. 1.5 hours
• Base Charging of Earphones: 2times
• Music Playing Time: Up to 6 hours
• Tal k Time: Up to 6 hours
• Up to 6 hours Appox. 100 hours
• Driver: 6mm Diameter
• Driver Sensitivity 90±3dB
• Driver Impedance : 160±15%
• Driver Frequency Ring Range: 20-20kHz
• Base Dimensions (mm): L6 1.5•W19.4•H29.5
• Earphone Dimensions (mm): L24.6 xW12.9xH24.1
• Weight per Earphone: Appox. 4.6g
• Appox. 4.6g Appox. 31.9g
• Product Materials: ABS+PC Plastic, Magnets (Earphones & Charging Base), Silicone (Ear cps)
• Operating/Storage/Transport Conditions:i -15’C to +50’C @ 20%- 80% RH (non -condensing)

“‘Times above may vary due to user’s operation mode and device settings  CE & ! The Bluetooth® word mark is a registered trademark owned by Bluetooth SIG, Inc. At the end of its life, please treat this product as electronic waste and dispose of responsibly according to current local regulations.

Warranty Form

References

• JA Davey Ltd
• JA Davey Pty Ltd

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>