QUANTUM NETWORKS QN-I-200 Indoor and Outdoor AP LED Status User Guide
- May 15, 2024
- QUANTUM NETWORKS
Table of Contents
Reference Guide
LED Status on Quantum Networks
Copyright Information
The copyright and trademark specifications mentioned in this document are
subject to change without prior notice. All the content, including the Quantum
Networks®️ logo, is the property of Zen Exim Pvt. Ltd. Other brands or
products mentioned in this document may be trademarks or registered trademarks
of their respective owners. It is strictly prohibited to use, translate or
transmit the contents of this document in any form or by any means without
obtaining prior written permission from Zen Exim Pvt. Ltd.
Document Abstract
This document describes the LED status of Quantum Networks indoor and
outdoor AP.
The guide applies to QN-I-200, QN-I-220, QN-H-220, QN-H-245, QN-I-270,
QN-I-470, QNI-210 and QN-O-230 model only.
Details of LED status on Quantum Networks Indoor AP
QN-I-220
| LED Count | LED Status | Condition |
|---|---|---|
| 1 | Red , Green, Blue | Blue – On: when AP is in Boot process or in Quick setup |
Red – On: AP is in standalone mode
Green – On: AP is managed through Cloud and connected with Controller
Green Blinking: AP is managed through Cloud but disconnected from Controller
Red Blinking: Quick setup is completed and AP is updating with cloud
configuration (while update is in process, please do not remove power source)
QN-H-220
| LED Count | LED Status | Condition |
|---|---|---|
| 1 | Red , Green, Blue | Blue – On: when AP is in Boot process or in Quick setup |
Red – On: AP is in standalone mode
Green – On: AP is managed through Cloud and connected with Controller
Green Blinking: AP is managed through Cloud but disconnected from Controller
Red Blinking: Quick setup is completed and AP is updating with cloud
configuration (while update is in process, please do not remove power source)
QN-H-245
| LED Count | LED Status | Condition |
|---|---|---|
| 1 | Orange – On | Uplink Port is connected through wire |
| Orange – Blinking | AP is power on through Power adopter but uplink |
connection not available
2| Green – On| No traffic on 2.4 GHz radio
| Green – Blinking| When traffic on 2.4 GHz radio is active
| Green – Off| 2.4 GHz radio is off
3| Green – On| No traffic on 5 GHz radio
| Green – Blinking| When traffic on 5 GHz radio is active
| Green – Off| 5 GHz radio is off
4| Green – On| AP is managed through cloud and connected with controller
| Green – Blinking| AP is managed through cloud but disconnected from
controller
| Green – Off| AP is managed through standalone mode
5| Green – On| AP is power on through PoE or power adopter
QN-I-270
| LED Count | LED Status | Condition |
|---|---|---|
| 1 | Green – On | On: No traffic on 2.4GHz radio |
| Green – Blinking | Blinking: when traffic on 2.4GHz radio is active | |
| Green – Off | Off : 2.4GHz radio is off | |
| 2 | Green – On | On: No traffic on 5 GHz radio |
| Green – Blinking | Blinking: when traffic on 5 GHz radio is active | |
| Green – Off | Off: 5 GHz radio is off | |
| 3 | Green – On | On: AP is Power on |
QN-I-470
| LED Count | LED Status | Condition |
|---|---|---|
| 1 | Green – On | On: AP is Power on |
| 2 | Green – On | On: No traffic on 2.4GHz radio |
| Green – Blinking | Blinking: when traffic on 2.4GHz radio is active | |
| Green – Off | Off : 2.4GHz radio is off | |
| 3 | Green – On | On: No traffic on 5 GHz radio |
| Green – Blinking | Blinking: when traffic on 5 GHz radio is active | |
| Green – Off | Off: 5 GHz radio is off | |
| 4 | Green – On | On: WAN cable connected |
QN-I-210
| LED Count | LED Status | Condition |
|---|---|---|
| 1 | Red , Green, Blue | Blue – On: when AP is in Boot process or in Quick setup |
| Red – On: AP is in standalone mode | ||
| Green – On: AP is managed through Cloud and connected with Controller | ||
| Green Blinking: AP is managed through Cloud but disconnected from |
Controller
| | Red Blinking: Quick setup is completed and AP is updating with cloud
configuration (while update is in process, please do not remove power source)
Details of LED status on Quantum Networks Outdoor AP
QN-O-230
| LED Count | LED Status | Condition |
|---|---|---|
| 1 | Green – On | On: No traffic on 5 GHz radio |
| Green – Off | Off: 5 GHz radio is off | |
| 2 | Green – On | On: No traffic on 2.4GHz radio |
| Green – Off | Off: 2.4GHz radio is off | |
| 3 | Green – On | On: WAN (ETH / SFP) is connected |
| Green – Off | Off: WAN (ETH / SFP) is not connected | |
| 4 | Off | System |
| 5 | Green – On | On: AP is Power on |