smartwater Wireless Tank Level System User Guide
- June 6, 2024
- smartwater
Table of Contents
smartwater Wireless Tank Level System User Guide
Ph: +64 9 278 6430
NZL: 0800 40 14 14 | AUS: 1800 76 47 25
www.smartwateronline.com
Components in the kit
Setup
Step 1.
Step 2.
Plug in the Power Supply and connect it to the LCD or WiFi Gateway.
Note: For the Wall Mount WiFi LCD Keypad, Smart Water recommends installation by a certified electrician.
Step 3
Step 4 (LCD)
Ensure the LCD is in the “Add Device” screen.
Step 4 (App)
App download the Smart Water App
Step 5
Step 6
Congratulations!
Your system is installed.
Repeat the “Add Device” process for any additional tanks or pump controllers to be connected to the system. Allow time for Smart Water to learn the water usage of each connected tank.
The LCD and App will provide detailed data of your water level and usage after a few days.
Check out the forecasting and weather page on the App.
Finally, invite other users to view or edit your system via the Smart Water App.
For comprehensive set-up instructions, download the full manual from www.smartwateronline.com
Optional Pump Controller
Go to the “Add Device” screen on the LCD or the “Add a new device” screen on the App.
Power the pump controller based on the model in use (230V AC, 12V DC, or Change-Over).
Connect the pump controller in series with your pump, relay or contactor.
Press the “Connect” button on the pump controller.
The LCD or App will confirm successful connection of the device to your system.
Set a customised name for your pump controller if desired.
Set up automatic rules for the pump operation via the LCD or App.
Optional Active Repeater
This product is very simple to operate… just turn it on!
Position the repeater in a location which has line of sight to the tank transmitter or pump controller and also to the WiFi LCD touch screen or WiFi Gateway.
Optimise the repeater position for access to sunlight.
Smart Hints for best performance
- Be gentle when handling the Water Sensor, it is a precision measuring instrument and can be easily damaged
- Ensure maximum access to sunlight for the Tank Transmitter solar panel
- Try and optimise Antenna position for best reception
- Charge up your Tank Transmitter for 3-4 hours before installation
- If using a Pump Controller be sure to set the run-timer
Additional Accessories
- Yagi Antenna
- High Power Dipole Antenna
- Bracket Mount Antenna
- Extra Tank Units and Pump Controllers
- Active Repeaters
These and other Smart Water accessories can be purchased online at
www.smartwateronline.com
Wireless Tank Level System
Ph: +64 9 278 6430
NZL: 0800 40 14 14 RUS: 1800 76 47 25
See more at www.smartwateronline.com
© Copyright 2019 Ivent Solutions Limited. Patent pending.
Read More About This Manual & Download PDF: