INTECO SN022097 3 In 1 Wireless Charger User Manual
- June 3, 2024
- INTECO
Table of Contents
INTECO SN022097 3 In 1 Wireless Charger
Product introduction
Thanks for choosing us
This is a three in one wireless charger that allows you enjoy the fun of
digital products easily.
Product appearance
Product
indicator light status
- LED indicator: status
- LEO light always bright: Power on
- LEO light normally on: Working
- LED light flickers: I FOO
Clock function
- The time display is in 24-hour system, each blink of the clock represent in 1
- Alarm setting: Click SET” button to enter the setting mode, and press”+” or”.” to adjust the time of alarm 1
- Clock setting: Long press “SET” button in 2 seconds to enter the setting mode, and press”+” or”.” to adjust the time!
- Alarm switch: Click the “Alarm” button to turn off the bell of alarm, long press the button to turn off or turn on the alarm function
Notes
-
When wireless charging, make sure there is no metal foreign body in the wireless charging panel
-
Mobile phones for wireless charging should meet the Qi standard
-
Do not use this product in a high temperature, humid environment, please stay away from fire and
-
The distance between mobile phone and wireless charger is less than 6mm when using wireless charging
-
When using this product, please do not place metal foreign object (such as keys, coins, batteries or jewelry) on it, otherwise it will cause abnormal charging or
-
The position of the mobile phone protection case and the device on the wireless charger will affect the charging speed, the farther it is placed on the wireless charger from the central position, the slower the charging speed will be
-
Do not dissemble this product at will.
Description
| Input | DC 5V/2A, 9V/1.67A, 12V/2A |
|---|---|
| Size | 200100120mm |
| compatible device | QI |
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.