FUJITSU AGYG14KVCA Air Conditioner Floor Type Instruction Manual
- June 17, 2024
- FUJITSU
Table of Contents
FUJITSU AGYG14KVCA Air Conditioner Floor Type
Specifications
- Model: Floor type air conditioner
- Part No.: 9378532090-02
Product Information
This air conditioner is designed for floor installation and comes with a remote control for easy operation. It features various safety symbols to indicate potential risks and necessary precautions. The unit contains fluorinated greenhouse gases and requires careful handling.
Usage Instructions
1. Safety Precautions:
Before operating the air conditioner, carefully read and understand all safety warnings provided in the manual.
2. Preparation:
Check that all accessories are included such as the remote control, remote control holder, self-tapping screws, batteries, air cleaning filters, and filter supports.
Installation of the remote control holder:
- Insert the screws into the designated holes.
- Slide the holder upwards until it clicks into place.
3. Parts Overview:
Refer to the manual for detailed instructions on using the optional remote control as its operation may vary. Some key parts of the air conditioner unit include:
- Automatic mode and filter indicator
- Air outlet selection switch
- Air filter
- Airflow direction fin
- Front panel
- Vertical fin (behind airflow direction fin and damper)
- Air cleaning filter
- Signal receiver for the remote control
FAQs
- Q: What should I do if the air conditioner does not cool properly?
- A: Check if the air intake grille is fully closed before turning on the unit. An incomplete closure may affect performance.
- Q: Where can I find the model name of the air conditioner?
- A: The model name is located on the rating label of the unit.
- Q: Does the conditioner contain greenhouse gases?
- A: Yes, this product contains fluorinated greenhouse gases.
- Q: How do I install the remote control support?
- A: Refer to the ‘Installazione del supporto del telecomando’ section with visual steps provided in the manual.
- Q: What precautions should I take when positioning the air flow direction?
- A: Before adjusting the air flow direction, ensure that the air flow direction louver has completely stopped.
“`
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>